Journal of Structural Engineering: Recent submissions
Now showing items 2301-2320 of 10765
-
Simplified Shear Design of Slender Reinforced Concrete Beams with Stirrups
(American Society of Civil Engineers, 2016)For simplified shear design of slender reinforced concrete (RC) beams with stirrups, a modified variable-angle truss model is developed in this paper. In this model, an analytical solution of the inclination of struts (θ) ... -
Rocking Timber Structure with Slip-Friction Connectors Conceptualized As a Plastically Deformable Hinge within a Multistory Shear Wall
(American Society of Civil Engineers, 2016)Recent experiments on a 2.44×2.44 m rigid timber wall panel with slip-friction connectors have demonstrated the feasibility of enabling elastoplastic behavior in structures that would otherwise be essentially rigid. The ... -
Distributed Yielding Concept for Improved Seismic Collapse Performance of Rigid Wall-Flexible Diaphragm Buildings
(American Society of Civil Engineers, 2016)Rigid wall-flexible diaphragm (RWFD) buildings are a common type of single-story construction in North America, Europe, and New Zealand that incorporate rigid in-plane concrete or masonry walls and flexible in-plane wood, ... -
Three-Dimensional Parabolic Cable Element for Static Analysis of Cable Structures
(American Society of Civil Engineers, 2016)This paper presents a three-dimensional inclined parabolic cable element for static analysis of cable structures. After a catenary cable element is briefly reviewed, the three dimensional parabolic cable considered in this ... -
Out-of-Plane Design Procedure for Confined Masonry Walls
(American Society of Civil Engineers, 2016)This paper presents a design procedure to determine the out-of-plane strength of confined masonry walls. For this purpose, eight full-scale confined walls were tested in the laboratory. Walls were subjected to axial and ... -
Structural Behavior of CHS T-Joints Subjected to Static In-Plane Bending in Fire Conditions
(American Society of Civil Engineers, 2016)Fire resistance of steel joints is always a major concern in the design of steel structures under extremely hazardous conditions. However, for circular hollow section (CHS) joints in fire conditions, little information is ... -
Seismic Simulation of an Integrated Ceiling-Partition Wall-Piping System at E-Defense. I: Three-Dimensional Structural Response and Base Isolation
(American Society of Civil Engineers, 2016)The seismic response of a full-scale, 5-story steel moment frame building in base-isolated and fixed-base configurations with an integrated suspended ceiling-partition wall-sprinkler piping system that was shaken at E-Defense ... -
Experimental Performance and Structural Analysis of Plywood-Coupled LVL Walls
(American Society of Civil Engineers, 2016)Prestressed-laminated timber (Pres-Lam) design has recently been adopted for multistory timber buildings based on ongoing research at the University of Canterbury, New Zealand. This system combines large timber members ... -
Research Needs for Developing a Risk-Informed Methodology for Community Resilience
(American Society of Civil Engineers, 2016)Resilience has been defined as “the ability to prepare and plan for, absorb, recover from, and more successfully adapt to adverse events.” The term resilience is applied to a range of topics including physical security, ... -
Fracture Mechanics-Based Design of Column Splices with Partial Joint Penetration Welds
(American Society of Civil Engineers, 2016)Design standards in the United States mandate the use of complete joint penetration (CJP) welds for welded column splices (WCS) in high-seismic regions. However, recent experiments suggest that economical partial joint ... -
Experimental Investigation of Composite Beams with Shear Connections Subjected to Fire Loading
(American Society of Civil Engineers, 2016)This paper presents the results from experimental investigations focused on the thermal and structural behavior of composite beams with shear connections subjected to fire conditions. Five partial composite beams with flat, ... -
Plastic Hinge Relocation Methods for Emulative PC Beam–Column Connections
(American Society of Civil Engineers, 2016)Various plastic hinge relocation methods were studied to improve the earthquake resistance of emulative precast concrete (PC) beam-column connections using PC U-shell beams. The present study used two strengthening methods ... -
Seismic Isolation of a Shear Wall Structure Using Rectangular Fiber-Reinforced Elastomeric Isolators
(American Society of Civil Engineers, 2016)The seismic response of a 2-story reinforced concrete shear wall structure seismically isolated using unbonded rectangular fiber-reinforced elastomeric isolators (FREIs) is investigated. Using rectangular isolators, rather ... -
Cyclic Behavior of Very Short Steel Shear Links
(American Society of Civil Engineers, 2016)A replaceable coupling beam is proposed comprising of steel hybrid shear links that are shorter than typical shear links in eccentrically braced frames (EBFs). Cyclic loading tests were conducted to examine the behavior ... -
Global Size Optimization of Statically Determinate Trusses Considering Displacement, Member, and Joint Constraints
(American Society of Civil Engineers, 2016)Realistic truss design optimization problems are often governed by practical constraints. Because of the complexity of these constraints, usually only member constraints are taken into account during the optimization, and ... -
Structural Behavior of an Air-Inflated Fabric Arch Frame
(American Society of Civil Engineers, 2016)This paper presents experimental and numerical studies on the structural behavior of an air-inflated frame consisting of arches and coupling beams. In the experimental study, a full-scale specimen, which was 25.0 m ... -
Influence of Charge Shape and Point of Detonation on Blast-Resistant Design
(American Society of Civil Engineers, 2016)Charts in technical manuals and standards of practice can be used to compute incident and reflected peak overpressures and scaled impulses generated by a detonation of a high explosive. Design values are reported for ... -
Behavior and Strength of Headed Stud–SFRCC Shear Connection. II: Strength Evaluation
(American Society of Civil Engineers, 2016)This paper is the second part of a two-part report describing the behavior of headed stud–SFRCC (steel-fiber-reinforced cementitious composite) shear connection. The first paper presented an experimental study of headed ... -
Flexural-Torsional Buckling Resistance Design of Circular Arches with Elastic End Restraints
(American Society of Civil Engineers, 2016)This paper presents the flexural-torsional buckling resistance and design of steel circular arches subjected to uniform compression with elastic end bending restraints by using finite element (FE) numerical analyses. ... -
Behavior of Sway Two-Bay, Two-Story Composite Steel Frames in Fire
(American Society of Civil Engineers, 2016)The experimental results of three full-scale two-story, two-bay, composite steel frames under furnace loading are described briefly. During tests, the composite beams and steel columns were exposed to fire, and only the ...