Journal of Structural Engineering: Recent submissions
Now showing items 2341-2360 of 10765
-
Bond Studies of High-Strength Concrete Joints Confined with Stirrups, Steel Fibers, or Fiber-Reinforced Polymer Sheets
(American Society of Civil Engineers, 2016)The paper presents a correlation study of the results of three research programs conducted on hooked bars anchored in high-strength concrete (HSC) beam-column joints at the American University of Beirut (AUB). The specimen ... -
Seismic Analysis of Cross-Laminated Multistory Timber Buildings Using Code-Prescribed Methods: Influence of Panel Size, Connection Ductility, and Schematization
(American Society of Civil Engineers, 2016)This paper investigates the seismic analysis of multistory cross-laminated timber (XLAM) buildings. The influence of different parameters such as wall geometry, vertical load level, friction, and, most importantly, connection ... -
Ground Snow Loads for the Western United States: State of the Art
(American Society of Civil Engineers, 2016)A standard defines ground snow loads for much of the nation, with the exception of an 11-state area of the West where the terrain and complex weather patterns require local, regional, and statewide studies. Hence, many ... -
Application of a Translational Tuned Mass Damper Designed by Means of Genetic Algorithms on a Multistory Cross-Laminated Timber Building
(American Society of Civil Engineers, 2016)This paper presents a numerical study conducted on a seven-story timber building made of cross-laminated (X-lam) panels, equipped with a linear translational tuned mass damper (TMD). The TMD is placed on the top of the ... -
Response of Steel Reduced Beam Section Connections Exposed to Fire
(American Society of Civil Engineers, 2016)Steel structures may be vulnerable to fires; therefore, work is underway in several quarters to advance performance-based engineering (PBE) of steel frames for fire conditions. Both experimentation and finite-element ... -
Disaster Resilience of Critical Water Infrastructure Systems
(American Society of Civil Engineers, 2016)Critical water infrastructure systems (e.g., drinking water treatment, transmission, and distribution; and wastewater and stormwater collection and treatment) are critical functions of a healthy society. Disaster ... -
Finite-Element Simulation of Posttensioned Steel Connections with Bolted Angles under Cyclic Loading
(American Society of Civil Engineers, 2016)Steel beam-column connections with posttensioned (PT) elements are proven systems that can provide adequate stiffness, strength, and ductility, while eliminating permanent deformations in a moment-resisting frame subjected ... -
Modeling of Laminated Veneer Lumber Beams with Holes Using Cohesive Elements
(American Society of Civil Engineers, 2016)Openings are usually required in timber beams to allow services like plumbing, sewage pipes, and electrical wiring to run through. These openings can cause significant stresses perpendicular to the grain direction, which ... -
Real-Time Output-Only Identification of Time-Varying Cable Tension from Accelerations via Complexity Pursuit
(American Society of Civil Engineers, 2016)In-service cables of structures, such as those in cable-supported buildings and cable bridges (e.g., stay cables and suspenders), suffer from cumulative fatigue damage caused by dynamic loads (e.g., the cyclic ... -
Seismic Performance Evaluation of Long-Span Conventional Moment Frames and Buckling-Restrained Knee-Braced Truss Moment Frames
(American Society of Civil Engineers, 2016)Steel moment frame (MF) is one of the most prevalent and well researched steel seismic force resisting systems worldwide. However, efficiency and feasibility of using MF diminishes for large spans. In this paper, a recently ... -
Dynamic Imaging: Real-Time Detection of Local Structural Damage with Blind Separation of Low-Rank Background and Sparse Innovation
(American Society of Civil Engineers, 2016)Real-time close-up imaging (filming or video surveillance) of structures is used to automate detection of local component-level damage by exploiting the spatiotemporal data structure of the multiple temporal frames of ... -
Simulation of Tests on Cast-In and Postinstalled Column-to-Foundation Connections to Quantify the Effect of Cyclic Loading
(American Society of Civil Engineers, 2016)Additional columns are often used as a retrofitting solution for reinforced concrete structures, particularly in seismic regions. These columns require postinstalled starter bars that inhibit the detailing of the anchorage ... -
Triangular Shell Heat Transfer Element for the Thermal Analysis of Nonuniformly Heated Structures
(American Society of Civil Engineers, 2016)This paper presents a triangular shell heat transfer element that is used to simulate the thermal response of nonuniformly heated structures. The formulation uses a combination of finite-element and control volume techniques ... -
Dynamic Performance of Flush End-Plate Beam-Column Connections and Design Applications in Progressive Collapse
(American Society of Civil Engineers, 2016)An experimental program was conducted in this study to investigate the dynamic behavior of flush end plate steel beam-column cruciform connections following instantaneous removal of a central supporting column. The dynamic ... -
Large-Scale Hybrid Simulation of a Steel Moment Frame Building Structure through Collapse
(American Society of Civil Engineers, 2016)The implementation of two series of hybrid simulations that aim to trace the system-level seismic response of a four-story steel moment frame building structure through collapse is presented. In the first series of tests, ... -
Implementable Bio-Inspired Passive Negative Spring Actuator for Full-Scale Structural Control under Seismic Excitation
(American Society of Civil Engineers, 2016)A bio-inspired passive negative spring actuator inspired by an energy-dissipating mechanism called sacrificial bonds and hidden length is designed, fabricated and implemented in a test case of a three-story structural model ... -
Framework for Incorporating Probabilistic Building Performance in the Assessment of Community Seismic Resilience
(American Society of Civil Engineers, 2016)A framework is presented for incorporating probabilistic building performance limit states in the assessment of community resilience to earthquakes. The limit states are defined on the basis of their implications to ... -
Experimental Studies on Cyclic Performance of Column Base Strong Axis–Aligned Asymmetric Friction Connections
(American Society of Civil Engineers, 2016)This paper describes experimental testing of an asymmetric friction connection (AFC) at the base of a steel column such as may be used in a moment-frame. Friction/sliding surfaces were parallel to the column-strong axis. ... -
Equivalent Viscous Damping for Steel Moment-Resisting Frames with Cross-Laminated Timber Infill Walls
(American Society of Civil Engineers, 2016)In the direct displacement-based design method, energy dissipative capacity of structures can be represented by an equivalent viscous damping (EVD). A number of studies have been reported in the formulation of EVD for ... -
Development and Testing of Naturally Buckling Steel Braces
(American Society of Civil Engineers, 2016)Steel concentrically braced frames inherently provide great strength and stiffness, and are widely used for seismic resisting systems in buildings. These include conventional buckling braced frames and buckling restrained ...