Journal of Structural Engineering: Recent submissions
Now showing items 2161-2180 of 10765
-
Experimental and Analytical Investigation of Cross-Laminated Timber Panels Subjected to Out-of-Plane Blast Loads
(American Society of Civil Engineers, 2018)Presented in this paper are the results of an experimental program investigating the out-of-plane behavior of CLT panels under static and blast loading. A total of 18 CLT panels, with panel thicknesses of 105 and 175 mm ... -
Behavior of Hollow-Core FRP-Concrete-Steel Columns under Static Cyclic Flexural Loading
(American Society of Civil Engineers, 2018)This paper presents the seismic behavior of hollow-core fiber-reinforced polymer (FRP)-concrete-steel (HC-FCS) columns comparable with the conventional RC column. The typical HC-FCS column consists of a concrete shell ... -
Effect of Circumferentially Nonuniform Lateral Tension on Bond Behavior between Plain Round Bars and Concrete: Analytical Study
(American Society of Civil Engineers, 2017)The bond behavior between a plain bar and concrete has received more attention in recent years because of its importance in the assessment of historical structures. The negative effect of lateral tension on the bond ... -
Simplified Numerical Modeling of Axially Loaded Circular Concrete-Filled Steel Stub Columns
(American Society of Civil Engineers, 2017)Behavior of concrete-filled steel tubular (CFST) columns can be predicted accurately using detailed finite-element (FE) modeling, but such models are tedious to build and impractical for frame analysis. In contrast, ... -
Sustainable Earthquake-Resisting System
(American Society of Civil Engineers, 2018)A new design philosophy that leads to efficient earthquake-resisting systems is presented. Commercially available technologies are used to propose an archetype that is capable of damage control, elimination or reduction ... -
Modeling Techniques for Strain-Range-Dependent Hardening Behavior of Low-Yield-Point Steel Shear Panel Dampers
(American Society of Civil Engineers, 2017)Shear panel dampers made of the low-yield-point steel exhibit significant overstrength under cyclic loading—a phenomenon that has been observed to depend not only on accumulated plastic deformations but also the loading ... -
Continuous One-Way RC Slabs with Sinking Outer Support: Tests and Simple Model
(American Society of Civil Engineers, 2018)Tests were carried out on two continuous one-way slab specimens, representing, at a scale of 1:1.5, the floor slabs of a multistory building most affected by a postulated instant loss of a perimeter column owing to accidental ... -
Seismic Response of a Yielding Structure Coupled with a Rocking Wall
(American Society of Civil Engineers, 2018)This paper investigates the inelastic response of a yielding single-degree-of-freedom oscillator coupled with a rocking wall. Configurations of both a stepping rocking wall and a pinned rocking wall that have been reported ... -
Lateral-Torsional Buckling of Circular Steel Arches under Arbitrary Radial Concentrated Load
(American Society of Civil Engineers, 2017)Steel arches are applied in many engineering structures because of their excellent capacity to resist various transverse loadings. Modified (or normalized) slenderness plays an important role in the strength design of steel ... -
Shear Mechanisms in Reinforced Concrete Beams under Impact Loading
(American Society of Civil Engineers, 2017)A well-instrumented drop-weight test program was developed to investigate shear failure modes of large-scale RC beams under impact loading. Test variables included beam span, transverse reinforcement ratio, impact mass, ... -
Improved Noncompact Web-Slenderness Limit for Steel I-Girders
(American Society of Civil Engineers, 2017)The noncompact web-slenderness limit in current design specifications is based on an assumed value of the plate buckling coefficient for a web subjected to flexure that is between the values for fixed and simply-supported ... -
Progressive Collapse Resistance of Precast Concrete Frames with Discontinuous Reinforcement in the Joint
(American Society of Civil Engineers, 2017)Boundary conditions of precast concrete frames play a crucial role in their progressive collapse resistance under middle column removal scenarios. Interior and exterior frames behave differently as a result of different ... -
Performance of D-Regions Affected by Alkali-Silica Reaction: Experimental and Analytical Study
(American Society of Civil Engineers, 2017)This paper describes the experimental performance of D-region reinforced concrete bent specimens affected by varying levels of alkali-silica reaction (ASR) from none to mid-to-late stages, as determined from petrography ... -
Flexural Behavior of Glass Beams with T and I Shape Cross Sections
(American Society of Civil Engineers, 2017)Glass beams having T or I cross sections can be obtained as glass panels or laminated glass (LG) panels assembled with polymer adhesives of different types, such as semirigid (silicones, modified silicones, and polyurethanes) ... -
Robustness of Load and Resistance Design Factors for RC Columns with Wind-Dominated Combination Considering Random Eccentricity
(American Society of Civil Engineers, 2017)Based on the capacity models in the 2008 edition of the American Concrete Institute (ACI) Standard Building Code Requirements for Structural Concrete, a more realistic limit state function is built for reinforced concrete ... -
Wave Method for Structural Health Monitoring: Testing Using Full-Scale Shake Table Experiment Data
(American Society of Civil Engineers, 2017)An algorithm of the wave method for structural health monitoring (SHM) is tested and calibrated using shake table experiment data of a full-scale, seven-story, reinforced-concrete building slice. The method is based on ... -
Ground Motion Characteristics of the 2015 Gorkha, Nepal, Earthquake and Its Effects on a Prototype Unreinforced Masonry Building
(American Society of Civil Engineers, 2017)The 7.8-magnitude Nepal earthquake on April 25, 2015, caused more than 9,000 fatalities and tremendous damage to civil infrastructures. Some unique characteristics of this earthquake and its effects on a prototype unreinforced ... -
Strength Requirements for Shear Diaphragms Used for Stability Bracing of Steel Beams
(American Society of Civil Engineers, 2017)Light-gauge metal sheeting is often used in steel building and bridge industries as concrete deck formwork. Besides providing support to the fresh concrete, the sheeting acts as a shear diaphragm and provides continuous ... -
Characterizing Dependence of Extreme Wind Pressures
(American Society of Civil Engineers, 2017)The prediction of the extreme value of the wind pressure receives significant attention from the wind engineering community. However, the correlation among extreme wind pressures associated with different locations on the ... -
Analysis Methods for the Design of Special Concentrically Braced Frames with Three or More Tiers for In-Plane Seismic Demand
(American Society of Civil Engineers, 2017)This paper presents two analysis methods for the in-plane seismic response of steel multitiered braced frames (MT-BFs) with three or more tiers: (1) a substructuring technique; and (2) a stiffness analysis method. ...