• Login
    View Item 
    •   DSpace Home
    • ASCE
    • Journal of Structural Engineering
    • View Item
    •   DSpace Home
    • ASCE
    • Journal of Structural Engineering
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Lateral-Torsional Buckling of Circular Steel Arches under Arbitrary Radial Concentrated Load

    Thumbnail
    View/Open
    %28ASCE%29ST.1943-541X.0001858.pdf (922.5Kb)
    Date
    2017
    Author
    Airong Liu
    Hanwen Lu
    Jiyang Fu
    Yong-Lin Pi
    Metadata
    Show full item record
    Abstract
    Steel arches are applied in many engineering structures because of their excellent capacity to resist various transverse loadings. Modified (or normalized) slenderness plays an important role in the strength design of steel arches. The elastic lateral-torsional buckling load of steel arches is essential in calculating the modified slenderness for the out-of-plane strength design. This paper is concerned with analytical investigations of the elastic lateral-torsional buckling of steel pin-ended arches having in-plane rotationally restrained ends under an arbitrary radial concentrated load, which has not been reported in the literature. Nonuniform unsymmetrical distributed internal actions are produced by the arbitrary load and are significantly influenced by the load position. The arch suddenly reaches its ultimate resistance in a lateral-torsional buckling mode when the internal actions reach certain values. This paper conducts a theoretical investigation into the elastic lateral-torsional buckling of steel arches and derives the analytical solution for the buckling load based on accurate internal forces obtained by an exact prebuckling analysis. The fourth-order differential equations in terms of axial and radial displacements, which are successfully used for the prebuckling analysis of steel arches under symmetric loads, are found to be difficult to solve for steel arches under an arbitrary concentrated load. A proper method is explored and found useful for accurately determining the prebuckling internal forces. The analytical solutions for the elastic lateral-torsional buckling load based on the accurate prebuckling internal forces are compared with the independent finite-element results, and the comparisons show very good agreements between them. The effects of the load position on the lateral-torsional buckling loads of arches are investigated. It is found that the buckling loads are significantly influenced by changes in load position. The lateral-torsional buckling load increases as the load position moves away from the crown of the arch. The influence of the load position on the lateral-torsional buckling load of steel arches with a rectangular section is slightly significant than that of steel arches with an I-section. The elastic lateral-torsional buckling load obtained in this paper provides a sound basis for out-of-plane strength studies of steel arches in the future.
    URI
    http://138.201.223.254:8080/yetl1/handle/yetl/4244576
    Collections
    • Journal of Structural Engineering

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV