Journal of Structural Engineering: Recent submissions
Now showing items 2181-2200 of 10765
-
Reassessment of the Lateral Torsional Buckling Resistance of Rolled I-Section Members: Moment Gradient Tests
(American Society of Civil Engineers, 2017)The lateral torsional buckling (LTB) equations in some current standards are based on unified equations that are a fit to a large body of experimental test data. However, these curves tend to overestimate the capacities ... -
Reassessment of the Lateral Torsional Buckling Resistance of I-Section Members: Uniform-Moment Studies
(American Society of Civil Engineers, 2017)The I-section member lateral torsional buckling (LTB) resistance equations of the unified provisions underlying the current AISC and AASHTO specifications are a fit to a large body of experimental test data. It has been ... -
ISO Standard Fire Tests of Concrete-Filled Steel Tube Columns with Solid Steel Core
(American Society of Civil Engineers, 2017)Concrete-filled steel tube columns with solid steel core are prefabricated innovative composite columns that are especially designed to achieve high fire resistance, even with high slenderness ratios and load levels. These ... -
Joint Probabilistic Wind–Rainfall Model for Tropical Cyclone Hazard Characterization
(American Society of Civil Engineers, 2017)Often, rainfall-induced flooding has been the greatest factor influencing property loss and loss of life in major tropical cyclone events. However, a lack of an extensive historical rainfall record has long served as an ... -
Design and Evaluation of Tuned Inerter-Based Dampers for the Seismic Control of MDOF Structures
(American Society of Civil Engineers, 2017)The tuned viscous mass damper (TVMD) and tuned inerter damper (TID) are tuned inerter-based dampers (TIBDs) that can utilize amplified apparent mass and tuning effects. This study investigated the use of multiple TIBDs to ... -
Erratum for “Extreme Value Distribution and Peak Factor of Crosswind Response of Flexible Structures with Nonlinear Aeroelastic Effect” by Xinzhong Chen
(American Society of Civil Engineers, 2016) -
New Design Detail to Enhance the Seismic Performance of Ordinary Reinforced Partially Grouted Masonry Structures
(American Society of Civil Engineers, 2016)Recent studies have shown that in the event of a strong earthquake, partially grouted (PG) masonry walls would most likely not perform according to code expectations. The research reported herein is focused on introducing ... -
Vibration-Based Estimation of Tension Stress in Steel Eyebars
(American Society of Civil Engineers, 2016)To support the repair and maintenance of steel eyebars in bridges, tension stresses are sometimes estimated from the observed member natural frequencies. Although the ends of such eyebars are often essentially fixed, a ... -
Proposal for Defining a Tall Timber Building
(American Society of Civil Engineers, 2016)Forum papers are thought-provoking opinion pieces or essays founded in fact, sometimes containing speculation, on a civil engineering topic of general interest and relevance to the readership of the journal. The views ... -
Closure to “Reliability-Based Load Requirements for Formwork Shores during Concrete Placement” by Hao Zhang, James Reynolds, Kim J. R. Rasmussen, and Bruce R. Ellingwood
(American Society of Civil Engineers, 2016) -
Investigating the Behavior of Light-Frame Wood Stud Walls Subjected to Severe Blast Loading
(American Society of Civil Engineers, 2016)An understanding of the behavior of wood stud walls in a region corresponding to hazardous-blowout damage levels is currently lacking. The focus of the current study is on investigating the flexural response of full-scale ... -
Fuse-Type External Replaceable Dissipaters: Experimental Program and Numerical Modeling
(American Society of Civil Engineers, 2016)The paper presents the experimental and numerical study of a mild steel replaceable dissipation device. The dissipater is made of a milled-down mild steel bar that is confined by a steel tube filled with either grout or ... -
Experimental Investigations of Deconstructable Timber–Concrete Composite Beams
(American Society of Civil Engineers, 2016)In conventional timber–concrete composite (TCC) beams, timber joists and concrete slabs are connected permanently; however, the permanent timber–concrete connections can hinder repairing and reusing of structural components ... -
Experimental Investigation of Chevron Concentrically Braced Frames with Yielding Beams
(American Society of Civil Engineers, 2016)Steel concentrically braced frames designed prior to the implementation of capacity design principles in seismic design provisions may exhibit poor inelastic response under seismic excitation. These older, nonductile ... -
Hysteretic Model for Exposed Column–Base Connections
(American Society of Civil Engineers, 2016)A hysteretic model formulation is presented for simulation of the cyclic moment-rotation response of exposed column–base (ECB) connections, which are typically used to connect a steel column to a concrete footing in steel ... -
Shear Capacity of Doubly Skinned Composite Beams with Lacings
(American Society of Civil Engineers, 2016)The provision of shear stirrups/connectors is found to enhance the shear capacity of beams, thus preventing the brittle mode of failure. A doubly skinned composite system consists of steel cover plates on either side of ... -
Finite-Element Modeling of Actively Confined Normal-Strength and High-Strength Concrete under Uniaxial, Biaxial, and Triaxial Compression
(American Society of Civil Engineers, 2016)A concrete strength-sensitive finite element (FE) model applicable to concrete subjected to various confining pressure levels and conditions is presented. This paper focuses primarily on the failure surface and flow rule ... -
Seismic Collapse Risk Assessment of Reinforced Masonry Walls with Boundary Elements Using the FEMA P695 Methodology
(American Society of Civil Engineers, 2016)Using boundary elements in reinforced masonry (RM) walls allows closed ties to be used and multiple layers of vertical bars to be accommodated, thus providing a confining reinforcement cage. This enhances the overall ... -
Simulations of a Variable Friction Device for Multihazard Mitigation
(American Society of Civil Engineers, 2016)This paper investigates the performance of a novel semiactive damping device at mitigating nonsimultaneous multihazard loads. The device, termed modified friction device (MFD), has been previously proposed by the authors. ... -
Envelope Random Decrement Technique for Identification of Nonlinear Damping of Tall Buildings
(American Society of Civil Engineers, 2016)To accurately identify the nonlinear damping ratio of tall buildings, the authors propose an envelope random decrement technique (RDT). To verify the accuracy of the envelope RDT for the evaluation of amplitude-dependent ...