Journal of Structural Engineering: Recent submissions
Now showing items 2201-2220 of 10765
-
Development of Replaceable Cast Steel Links for Eccentrically Braced Frames
(American Society of Civil Engineers, 2016)Replaceable links for eccentrically braced steel frames (EBFs) decouple the yielding links from the floor beams to facilitate rapid repair or replacement after a seismic event. Replaceable links that are composed of rolled ... -
Impact of Reinforcement Ratio and Loading Type on the Deformation Capacity of High-Performance Fiber-Reinforced Cementitious Composites Reinforced with Mild Steel
(American Society of Civil Engineers, 2016)High-performance fiber-reinforced cement-based composites (HPFRCCs) reinforced with mild steel have been proposed for use in structural elements to enhance component strength and ductility, increase damage tolerance, and ... -
Seismic Enhancement of Welded Unreinforced Flange-Bolted Web Steel Moment Connections
(American Society of Civil Engineers, 2016)Widespread damage to welded unreinforced flange-bolted web (WUF-B) steel moment connections during the 1994 Northridge earthquake led to intensive research study of this connection. Despite the improvements to weld metal ... -
Dynamic Shake-Table Testing and Analytical Investigation of Self-Centering Steel Plate Shear Walls
(American Society of Civil Engineers, 2016)Recent research has shown that self-centering steel plate shear walls (SC-SPSWs) offer an enhanced seismic performance over conventional steel plate shear walls by providing an additional self-centering capability using ... -
Performance of Steel-Reinforced Concrete Beam-to-Column Joints after Exposure to Fire
(American Society of Civil Engineers, 2016)This paper presents a numerical analysis on the postfire behavior of steel-reinforced concrete (SRC) column to axially and rotationally restrained SRC beam joints. A finite-element analysis (FEA) model was developed to ... -
Effects of Cyclic Temperature on the Time-Dependent Behavior of Posttensioned Concrete Bridges
(American Society of Civil Engineers, 2016)Typically, measurement and analysis of concrete time-dependent behaviors such as creep and shrinkage are performed under the assumption of constant temperature conditions. However, many structures in the field are subject ... -
Discussion of “Experimental Seismic Behavior of a Full-Scale Four-Story Soft-Story Wood-Frame Building with Retrofits. I: Building Design, Retrofit Methodology, and Numerical Validation” by Pouria Bahmani, John W. van de Lindt, Mikhail Gershfeld, Gary L.
(American Society of Civil Engineers, 2016) -
Macroelement and Macropatch Approaches to Structural Topology Optimization Using the Ground Structure Method
(American Society of Civil Engineers, 2016)Topology optimization can be divided into continuum and discrete types, the latter being the emphasis of the present work. In the field of discrete structural topology optimization of trusses, the generation of an initial ... -
Ultimate-Load Behavior of RC Structural Systems Designed according to Eurocodes
(American Society of Civil Engineers, 2016)Various circumstances influence the behavior of reinforced concrete (RC) structures, some of which may increase the risk of a brittle failure for the whole system caused by shear forces. This paper presents a wide probabilistic ... -
Stainless Steel Grids for Confinement of Clay Brick Masonry Columns
(American Society of Civil Engineers, 2016)This work presents the results of an experimental investigation on the behavior of 21 solid clay brick columns internally strengthened by stainless steel grids placed in the horizontal joints of mortar. This reinforcing ... -
Effects of Geometric Imperfections on Flexural Buckling Resistance of Laterally Braced Columns
(American Society of Civil Engineers, 2016)This paper deals with the effects of geometric imperfections on flexural inelastic buckling resistance of axially loaded columns with equally spaced lateral braces and presents a simplified way of forming the critical ... -
Nailed Connection Behavior in Light-Frame Wood Shear Walls with an Intermediate Layer of Insulation
(American Society of Civil Engineers, 2016)The shear strength and stiffness of light-frame wood shear walls is highly dependent on the behavior of their individual nailed connections. Eighty-four nailed connection specimens were tested under shear loading to determine ... -
Ultimate Strain Criteria for RC Members in Monotonic or Cyclic Flexure
(American Society of Civil Engineers, 2016)A large number of experimental curvatures in plastic hinges of concrete members are used alongside analytical moment-curvature relations to backestimate strains in the bars, the extreme concrete fibers of a section, or its ... -
Steel Columns Subjected to Thermal Gradients from Fire Loading: Experimental Evaluation
(American Society of Civil Engineers, 2016)This paper presents the behavior of axially loaded steel columns subjected to thermal gradients through their cross sections. Experimental tests were conducted on full-scale wide-flange steel columns with W8×35 and W14×53 ... -
Seismic CFST Column-to-Precast Cap Beam Connections for Accelerated Bridge Construction
(American Society of Civil Engineers, 2016)Concrete-filled steel tubes (CFSTs) frequently are a more efficient and economical structural solution then conventional reinforced concrete and structural steel. For the same size member, CFSTs offer increased strength ... -
Behavior and Design of Thin-Walled Cold-Formed Steel Clip Angles Subjected to Shear Load
(American Society of Civil Engineers, 2016)Thin-walled cold-formed steel (CFS) clip angles are commonly used to connect CFS framing members or attach CFS members to the main building structure. The design provisions for CFS clip angle connectors have not been ... -
Reliability-Based Inspection Protocols for Mast-Arm Sign Support Structures
(American Society of Civil Engineers, 2016)There have been numerous examples of poor in-service performance of welded, tube-to-transverse plate connections within mast-arm sign support structures in the last several decades. A considerable amount of research has ... -
Triaxial Constitutive Model for Concrete under Cyclic Loading
(American Society of Civil Engineers, 2016)This paper presents a material model for the analysis of concrete under multiaxial, cyclic loading conditions. An elastoplastic formulation, having a nonassociative flow rule to capture compression-dominated behavior, is ... -
Practical Nonlinear Modeling of Reinforced Concrete Structural Walls
(American Society of Civil Engineers, 2016)Current engineering practice typically relies on the use of fiber-based modeling approaches with uncoupled axial-bending (P-M) and shear (V) responses to simulate nonlinear behavior of reinforced concrete (RC) structural ... -
Three-Parameter Kinematic Theory for Shear-Dominated Reinforced Concrete Walls
(American Society of Civil Engineers, 2016)This paper is aimed at addressing the need for physically accurate and computationally effective models for predicting the response of shear-dominated reinforced concrete walls. The presented theory is based on a ...