Journal of Structural Engineering: Recent submissions
Now showing items 2101-2120 of 10765
-
Load Transfer and Collapse Resistance of RC Flat Plates under Interior Column Removal Scenario
(American Society of Civil Engineers, 2018)Reinforced concrete (RC) flat-plate structures are vulnerable to punching shear failure at their slab-column connections, potentially leading to a catastrophic progressive collapse. In practice, the slab-column connection ... -
System-Level Seismic Damage Assessment Methodology for Reinforced Masonry Shear Wall Buildings
(American Society of Civil Engineers, 2018)Damage state (DS) assessment of reinforced masonry shear wall (RMSW) building systems is key for developing simulation tools for pre- and post-earthquake risk-assessment frameworks. However, the majority of available RMSW ... -
Experimental and Analytical Investigation of FRP Retrofitted Glued-Laminated Beams Subjected to Simulated Blast Loading
(American Society of Civil Engineers, 2018)An experimental program investigating the potential of fiber-reinforced polymers (FRPs) as a strengthening option for glulam beams subjected to simulated blast loads was undertaken. A total of four different retrofit ... -
Bayesian Modeling Approach for Forecast of Structural Stress Response Using Structural Health Monitoring Data
(American Society of Civil Engineers, 2018)The advancement in structural health monitoring (SHM) technology has been evolving from monitoring-based diagnosis to monitoring-based prognosis. The structural stress response derived by the measured strain data is ... -
Estimating Axial Force Demand in Columns of Shear-Type Structure Subjected to Earthquake-Base Excitation
(American Society of Civil Engineers, 2018)A procedure for estimating the number of simultaneously yielding stories NSYS in a shear-type building subjected to earthquake-base excitation (previously proposed and validated) is used here for estimating axial force ... -
Frequency Domain Analysis of Train–Guideway Interaction Dynamics
(American Society of Civil Engineers, 2018)A frequency domain approach to dynamic analysis of train–girder interaction is presented. The method is based on the calculation of a harmonic transfer matrix for the system, using the principle of harmonic balance. Results ... -
Nonlinear Modeling of Wood-Frame Shear Wall Systems for Performance-Based Earthquake Engineering: Recommendations for the ASCE 41 Standard
(American Society of Civil Engineers, 2018)Wood shear wall systems are the primary elements of seismic force-resisting system (SFRS) in virtually all light-frame wood buildings. Wood-frame buildings are unique because their nonstructural wall finishes, such as ... -
Seismic Shear Forces in Post-Tensioned Hybrid Precast Concrete Walls
(American Society of Civil Engineers, 2018)A method to accurately calculate seismic shear forces in post-tensioned hybrid (PH) precast concrete walls under risk-targeted maximum considered earthquake (MCER) level ground motions is essential to avoid unexpected ... -
Nonlinear Seismic Response Analysis of an Innovative Steel-and-Concrete Hybrid Coupled Wall System
(American Society of Civil Engineers, 2018)This paper studies the seismic response of an innovative hybrid coupled shear wall (HCW) system, obtained through the connection of a reinforced concrete (RC) wall to two steel side columns by means of steel links. This ... -
Wind Pressures on 4∶12-Sloped Hip Roofs of L- and T-Shaped Low-Rise Buildings
(American Society of Civil Engineers, 2018)A comprehensive wind tunnel experimental study for 4∶12-sloped hip roofs of L- and T-shaped low buildings was carried out in a simulated open terrain exposure to examine wind load characteristics and assess the applicability ... -
Energy and Cost Assessment of Adaptive Structures: Case Studies
(American Society of Civil Engineers, 2018)This paper demonstrates how adaptive design (details published elsewhere) can be employed to save, on average, 7% of whole-life energy on a range of spatial structures, the whole-life energy deriving from an embodied part ... -
Shear Capacity of a RC Bridge Deck Slab: Comparison between Multilevel Assessment and Field Test
(American Society of Civil Engineers, 2018)For reinforced concrete (RC) slabs without shear reinforcement, shear and punching can be the governing failure mode at the ultimate limit state if subjected to large concentrated loads. Shear and punching of RC slabs ... -
Fiber Beam–Column Element Considering Flange Contribution for Steel Links under Cyclic Loads
(American Society of Civil Engineers, 2018)Steel links are widely used as key energy dissipation components in steel eccentrically braced frames and hybrid coupled walls. This paper proposes a new displacement-based fiber beam-column element for simulating the ... -
Seismic Behavior of Steel Plate Reinforced Concrete Composite Shear Walls under Tension-Bending-Shear Combined Cyclic Load
(American Society of Civil Engineers, 2018)Steel plate reinforced concrete (SPRC) composite shear walls, which are composed of steel columns embedded in boundary elements and an embedded steel plate in the wall web, have been used in super-high-rise buildings. When ... -
Mode Cross-Over and Ductility of Dowelled LVL and CLT Connections under Monotonic and Cyclic Loading
(American Society of Civil Engineers, 2018)This paper presents an experimental study on dowelled connections in cross-laminated timber (CLT) and laminated veneer lumber (LVL) using ϕ2-mm mild steel dowels and internal steel plates. Connections designed to fail in ... -
Adaptive Force-Based Multimode Pushover Analysis for Seismic Evaluation of Midrise Buildings
(American Society of Civil Engineers, 2018)To consider the effect of higher modes in predicting the seismic responses of midrise buildings, as well as the progressive changes in the dynamic characteristics during the nonlinear analysis, an adaptive force-based ... -
Behavior of High-Strength Concrete Columns Reinforced with Galvanized Steel Equal-Angle Sections under Different Loading Conditions
(American Society of Civil Engineers, 2018)Experimental results are presented for a new method of reinforcing concrete columns with galvanized steel equal-angle (GSEA) sections. For the same cross-sectional area, a GSEA section has a higher second moment of area ... -
Selection of Input Motion for Seismic Analysis of Scoured Pile-Supported Bridge with Simplified Models
(American Society of Civil Engineers, 2018)Potential scouring scenarios around the foundations of bridges that pass over water could have adverse effects on the seismic response of both the site and the structures. In this study, a two-step methodology is proposed ... -
Studies on Cold-Formed Steel Stud Panels with Gypsum Sheathing Subjected to Out-of-Plane Bending
(American Society of Civil Engineers, 2018)An experimental investigation on gypsum sheathed cold-formed steel (CFS) panels with different sheathing configurations was conducted under four-point bending (out-of-plane). The purpose of the study was to investigate the ... -
Tsunami-Resilient Building Design Considerations for Coastal Communities of Washington, Oregon, and California
(American Society of Civil Engineers, 2018)The ASCE/SEI 7 Standards Committee has incorporated a new Chapter 6, “Tsunami Loads and Effects,” in the 216 edition of the ASCE 7 Standard, Minimum Design Loads and Associated Criteria for Buildings and Other Structures. ...