Journal of Structural Engineering: Recent submissions
Now showing items 2121-2140 of 10765
-
Evolutionary Spectra-Based Time-Varying Coherence Function and Application in Structural Response Analysis to Downburst Winds
(American Society of Civil Engineers, 2018)Priestley’s oscillatory process theory is widely employed to model nonstationary excitation. However, the underlying coherence function of this theory can only be time invariant. To take into account the time-varying ... -
Flexural Behavior of Concrete-Filled Double-Skin Tubes Subject to Blast Loading
(American Society of Civil Engineers, 2018)Large-scale tests on concrete-filled double-skin tubes, composed of pairs of concentric cold-formed rectangular hollow section members with the annulus between them filled with grout, are performed under air-blast loading. ... -
Equivalent Static Wind Loads on Single-Layer Cylindrical Steel Shells
(American Society of Civil Engineers, 2018)Wind tunnel tests were carried out in an open terrain to measure the wind pressure on six cylindrical roofs with the rise-span ratios of 1/4, 1/6, and 1/8 and length-span ratios of 1 and 2. Using the measured wind pressures ... -
Hysteretic Analysis Model for Pre-pressed Spring Self-Centering Energy Dissipation Braces
(American Society of Civil Engineers, 2018)A restoring force model is proposed that is applicable for predicting the hysteretic behaviors of the pre-pressed spring self-centering energy dissipation (PS-SCED) braces. Two Bouc-Wen models were used to portray the ... -
Simplified Collapse-Prevention Evaluation for the Reserve System of Low-Ductility Steel Concentrically Braced Frames
(American Society of Civil Engineers, 2018)Low-ductility steel concentrically braced frames (CBFs) are widely used in buildings as a lateral resistance system in seismic regions around the world due to their high stiffness and strength. Steel CBF buildings have ... -
Integrated Fracture-Based Model Formulation for RC Crack Analysis
(American Society of Civil Engineers, 2018)There is an opportunity to revisit and generalize classical theories for concrete cracking in light of increased interest in the use of nonconventional reinforcing materials and material efficiency. Fracture-based models ... -
Applying the Cyclic Void Growth Model to Assess the Ultralow Cycle Fatigue Life of Steel Castings
(American Society of Civil Engineers, 2018)Steel castings have become an attractive option in the development of new seismic force-resisting systems because of their geometric freedom and ability to control material properties. Despite, in most past applications, ... -
Assessing the Compressive Behavior of Dry-Stacked Concrete Masonry with Experimentally Informed Numerical Models
(American Society of Civil Engineers, 2018)In dry-stacked concrete masonry construction, units are laid without mortar, increasing the speed and reducing the cost of masonry installation. Despite these benefits, mortarless construction has not gained widespread ... -
Theoretical Analysis and Testing of Steel Frame with Cold-Formed Steel Shear Walls with Steel Sheathing
(American Society of Civil Engineers, 2018)A new structural system, called steel frame with cold-formed steel shear infill walls (SFIW), is developed by using cold-formed steel shear walls with steel sheathing plates on both sides as infill walls in steel frame. ... -
Modeling ASR/DEF Expansion Strains in Large Reinforced Concrete Specimens
(American Society of Civil Engineers, 2018)A recent alkali silica reaction (ASR)/delayed ettringite formation (DEF) expansion model was modified to account for the load-induced precracks within a structure. Factors such as the orientation of the exposure face, the ... -
Minimal Building Fragility Portfolio for Damage Assessment of Communities Subjected to Tornadoes
(American Society of Civil Engineers, 2018)Tornadoes are considered a low-probability high-consequence event that can cause significant damage to community infrastructure, resulting in injuries and fatalities and ultimately creating long-term socioeconomic losses. ... -
Evaluating Multiobjective Outcomes for Hazard Resilience and Sustainability from Enhanced Building Seismic Design Decisions
(American Society of Civil Engineers, 2018)This study investigates the idea that green buildings should be designed to withstand higher extreme loads (loads associated with earthquakes or other hazards) to reduce the environmental impacts associated with posthazard ... -
Predicting the Effective Flange Width of a CLT Slab in Timber Composite Beams
(American Society of Civil Engineers, 2018)A timber composite beam consists of a cross-laminated timber (CLT) panel attached to a girder such as a laminated veneer lumber (LVL) beam. Under positive bending moment, part of the CLT panel acts as the flange of the LVL ... -
Tests and Simple Models of RC Frame Subassemblies for Postulated Loss of Column
(American Society of Civil Engineers, 2018)The impact of the loss of an intermediate column on the most adversely affected subassembly of a multistory, multibay reinforced concrete (RC) frame was studied experimentally and analytically. Two subassemblies were ... -
Flexure Mechanism and Deformation at Bending-Compression Failure of RC Structural Walls
(American Society of Civil Engineers, 2018)The objective of the present study is to contribute to the understanding of the seismic behavior and performance of reinforced concrete flexure-dominated walls when their boundaries are subjected to high compression. Typical ... -
Erratum for “Wind-Induced Vibration Mitigation in Tall Buildings Using the Tuned Mass-Damper-Inerter” by Agathoklis Giaralis and Francesco Petrini
(American Society of Civil Engineers, 2018) -
Experimental Studies on Progressive Collapse Resistance of Steel Moment Frames under Localized Furnace Loading
(American Society of Civil Engineers, 2018)This paper presents experimental studies on the performance of planar moment steel frames with one column heated. The novelty of these tests is that the influences of key stages in the response of the heated column under ... -
Modeling the Flexural Collapse of Thin-Walled Spirally Welded Tapered Tubes
(American Society of Civil Engineers, 2018)The objective of this study is to develop and validate a practical finite-element modeling protocol for predicting the flexural strength and collapse behavior of thin-walled spirally welded tapered tubes that can be used ... -
Analytical Approach to Establishing the Elastic Behavior of Multipanel CLT Shear Walls Subjected to Lateral Loads
(American Society of Civil Engineers, 2018)Structures assembled with cross-laminated timber (CLT) panels, and designed to resist gravity and lateral loads, are being considered as viable options for low-rise to mid-rise buildings. In this paper, an analytical ... -
Seismic Retrofit of Concrete Shear Walls with SMA Tension Braces
(American Society of Civil Engineers, 2018)A bracing system consisting of tension-only superelastic nickel-titanium shape-memory alloy (SMA) was developed and implemented as a retrofitting methodology for seismically deficient squat reinforced concrete shear walls. ...