Journal of Structural Engineering: Recent submissions
Now showing items 2081-2100 of 10765
-
Experimental Investigation on Stress Redistribution and Load-Transfer Paths of Shear Walls with Openings
(American Society of Civil Engineers, 2018)The stress design method is gaining more and more attention for the design of two-dimensional and three-dimensional reinforced concrete members. Shear walls, a common type of RC members used in civil engineering, are ... -
Performance of Elliptical Hollow Sections under Combined Compression and Cyclic Bending
(American Society of Civil Engineers, 2018)This paper comprehensively discusses the potential of applying elliptical hollow sections (EHSs) for seismic regions. The study commenced with an experimental investigation of 12 EHS beam-column specimens under combined ... -
Punching Shear Behavior and Design of an Innovative Connection from Steel Tubular Column to Flat Concrete Slab
(American Society of Civil Engineers, 2018)This paper presents the results of an experimental and numerical investigation into the punching shear behavior of a simple and effective method of connection between a steel tubular column and concrete flat slab using ... -
Numerical Modeling of Nonuniform Corrosion-Induced Concrete Crack Width
(American Society of Civil Engineers, 2018)Corrosion of reinforced concrete is one of the major deterioration mechanisms that results in premature failure of the reinforced concrete structures. In practice, concrete crack width is one of the most important criteria ... -
Experimental Study of Dynamic Progressive Collapse in Flat-Plate Buildings Subjected to an Interior Column Removal
(American Society of Civil Engineers, 2018)The experimental results of dynamically removing an interior column in a single-story, 2-bay-by-2-bay reinforced concrete flat-plate substructure are presented. The test specimen represented pre-1971 designed flat-plate ... -
Time-Dependent Tension-Stiffening Mechanics of Fiber-Reinforced and Ultra-High-Performance Fiber-Reinforced Concrete
(American Society of Civil Engineers, 2018)The tension-stiffening behavior of fiber-reinforced concrete is of fundamental importance for the characterization of crack widths and spacings as well as determination of the tensile response of fiber-reinforced concrete ... -
Wind Pressure Mitigation on Gable Roofs for Low-Rise Buildings Using Spoilers
(American Society of Civil Engineers, 2018)Previous wind disaster investigations have indicated that the roof systems of low-rise buildings often suffer severe damage under the negative wind pressure caused by the sharp corners between the walls and the roof. ... -
Effects of Ground Motion Duration on the Seismic Performance and Collapse Rate of Light-Frame Wood Houses
(American Society of Civil Engineers, 2018)This paper studies the effects of long duration ground motion on three conventional low-rise light-frame wood houses with different sheathing configurations. These are two-story residential houses built with an oriented ... -
In-Plane Stiffness of Hybrid Steel–Cross-Laminated Timber Floor Diaphragms
(American Society of Civil Engineers, 2018)The use of hybrid structural systems formed by combining wood with other materials provides engineers with a wide range of solutions to satisfy code requirements for mid- and possibly high-rise buildings. Hybrid wood-based ... -
Experimental Behavior of Large Reinforced Concrete Specimen with Heavy ASR and DEF Deterioration
(American Society of Civil Engineers, 2018)Slight and moderate amounts of deterioration caused by alkali silica reaction (ASR)/delayed ettringite formation (DEF)-induced expansion in reinforced concrete specimens do not markedly or detrimentally affect its structural ... -
Distortional Buckling–Moment Resistance Capacity of Hybrid Double-I-Box Beams
(American Society of Civil Engineers, 2018)This paper presents a comprehensive experimental and numerical study on distortional buckling–moment resistance capacity of built-up cold-formed steel hybrid double-I-box beams (HDIBBs) under four-point bending. These ... -
Design Approach to Predict Post-Tensioning Losses in Post-Tensioned Timber Frames
(American Society of Civil Engineers, 2018)Since 21, twelve post-tensioned timber (Pres-Lam) buildings have been constructed throughout the world. The technology relies on unbonded post-tensioning tendons to provide moment capacity to beam-column, wall-foundation, ... -
Three-Dimensional Combined Elastic-Plastic and Damage Model for Nonlinear Analysis of Wood
(American Society of Civil Engineers, 2018)This paper presents a three-dimensional combined elastic-plastic and damage model for nonlinear analysis of wood members and connections. A strain-driven implicit algorithm was developed based on plastic theory and continuum ... -
Semipassive Resettable Stiffness Damper for Seismic Protection of Short-Period Structures
(American Society of Civil Engineers, 2018)In the present study, a semipassive resettable stiffness damper using motion amplification in the resetting mechanism is presented for seismic protection of short-period structures. Validation of the resetting mechanism ... -
Cold-Formed Steel Shear Wall Using Corrugated Steel Sheathing with Slits
(American Society of Civil Engineers, 2018)Recent research shows that shear walls with corrugated steel sheathing demonstrate high strength and high initial stiffness but low ductility. This paper presents an experimental study and numerical simulation aimed at ... -
Rebar Anchorage Slip Macromodel Considering Bond Stress Distribution: Monotonic Loading and Model Application
(American Society of Civil Engineers, 2018)This study presents a modified macromodel for calculating the anchorage slip of rebar under monotonic loading and its application to the fiber beam–column element model. The proposed macromodel reflects bond stress ... -
Spacing of Cracks in Reinforced Concrete Based on a Variable Transfer Length Model
(American Society of Civil Engineers, 2018)A method is proposed to indirectly determine values of the transfer length in cracked RC based on the observed load-deformation responses of RC tension members and their crack configurations under increasing load. The ... -
Seismic Upgrade of an Existing Tall Building Using Different Supplemental Energy Dissipation Devices
(American Society of Civil Engineers, 2018)The feasibility and cost-effectiveness of various retrofit techniques to improve the seismic performance of an existing 35-story steel building are examined. Three types of supplemental energy dissipation devices are used ... -
Economic Feasibility Study of Self-Centering Concentrically Braced Frame Systems
(American Society of Civil Engineers, 2018)Self-centering concentrically braced frame (SC-CBF) systems have been developed to increase the drift capacity of conventional concentrically braced frame (CBF) systems prior to damage to reduce postearthquake damages. ... -
Fragility Analysis of Space Reinforced Concrete Frame Structures with Structural Irregularity in Plan
(American Society of Civil Engineers, 2018)Because significant damages to structures having structural irregularity in their plans were repeatedly observed during many past earthquakes, there have been great research efforts to evaluate their seismic vulnerability. ...