Journal of Structural Engineering: Recent submissions
Now showing items 2061-2080 of 10765
-
Identification of Flexural Rigidity in Bridges with Limited Structural Information
(American Society of Civil Engineers, 2018)This paper presents a method for identifying the flexural rigidity of bridges with limited structural information using modal frequencies identified from measured acceleration data. The output of this study provides a ... -
Surface Roughness and Reynolds Number Effects on the Aerodynamic Forces and Pressures Acting on a Semicylindrical Roof in Smooth Flow
(American Society of Civil Engineers, 2018)The effects of surface roughness and Reynolds number on the characteristics of aerodynamic forces and pressures on a semicylindrical roof have been investigated in a wind tunnel. Simultaneous pressure measurements on smooth ... -
Fire-Resistance Behavior of Completely Overlapped Tubular Joints under Lap Brace Axial Loading
(American Society of Civil Engineers, 2018)The fire resistance behavior of completely overlapped tubular joints was experimentally and numerically investigated. Three completely overlapped tubular joint specimens with different geometric properties were tested to ... -
Application of an Innovative SMA Ring Spring System for Self-Centering Steel Frames Subject to Seismic Conditions
(American Society of Civil Engineers, 2018)This paper presents an innovative shape memory alloy (SMA) ring spring system used for high-performance steel beam-to-column connections. The ring spring system, which includes a series of SMA outer rings and high-strength ... -
Influence of Middle Member Thickness on Properties of Double-Shear Nail Joints
(American Society of Civil Engineers, 2018)For three-member nail joints under double shear loading, the Canadian timber design standard specifies a minimum thickness of the middle member of eight times the diameter of the nail (8d). This requirement has created ... -
Effect of Localized Damages on the Free Vibration Analysis of Civil Structures by Component-Wise Approach
(American Society of Civil Engineers, 2018)Refined one-dimensional (1D) models are used to carry out free vibration analysis of civil engineering structures affected by local damages. The Carrera unified formulation (CUF) provides higher-order structural models to ... -
Comprehensive FE Study of the Hysteretic Behavior of Steel–Concrete Composite and Noncomposite RWS Beam-to-Column Connections
(American Society of Civil Engineers, 2018)This paper investigates the behavior of reduced web section (RWS) steel–concrete composite (SCC) beam-to-column connections with circular web openings through a comprehensive finite element (FE) analysis following experimental ... -
Cyclic Behavior of Steel Double-Channel Built-Up Components with a New Lateral-Torsional-Buckling Prevention Detail
(American Society of Civil Engineers, 2018)Current standards require that, for moment-resisting frames, the strength degradation of a beam–column connection should not reduce flexural strength measured at a drift angle of .4 rad to less than 8% of the nominal ... -
Impact of Axial Load on the Seismic Response of Rectangular Walls
(American Society of Civil Engineers, 2018)Experimental testing was conducted on four large-scale, flexure-yielding walls with rectangular cross sections to investigate the impact of imposed axial load ratio (1, 14, and 2% of axial compression capacity) and transverse ... -
Seismic Behavior of Symmetric and Asymmetric Steel Structures with Rigid and Semirigid Diaphragms
(American Society of Civil Engineers, 2018)The torsional behavior of braced frames can be significantly influenced by the sequence of brace buckling, hinge development in beams or columns, and in-plane deformation of the diaphragm, even for the case of symmetric ... -
Assessment of the Effective Seismic Mass for Low-Rise Framed Shear Buildings Supporting Nearly Permanent Live Loads
(American Society of Civil Engineers, 2018)This paper presents the development of a lumped-parameter model of multistory framed shear buildings supporting rigid blocks with the possibility to slide. After favorably comparing with results from finite-element analyses ... -
Stress-Strain Behavior of C-Shaped Confined Concrete Masonry Boundary Elements of Reinforced Masonry Shear Walls
(American Society of Civil Engineers, 2018)Reliable material stress-strain relationship is the cornerstone of any analysis process. Unlike reinforced concrete, limited studies focused on the stress-strain behavior of confined reinforced masonry. Reinforced masonry ... -
Web Crippling Behavior of Unlipped Cold-Formed Ferritic Stainless Steel Channels Subject to One-Flange Loadings
(American Society of Civil Engineers, 2018)The web crippling strength of unlipped cold-formed ferritic stainless steel channels subject to interior-one-flange and end-one-flange loading is considered in this paper. A total of 144 results are presented, consisting ... -
Large-Scale Experimental Study of Ring Shaped–Steel Plate Shear Walls
(American Society of Civil Engineers, 2018)The ring shaped–steel plate shear wall (RS-SPSW) is a new lateral load resisting system that offers improved seismic energy dissipation and stiffness over conventional steel plate shear wall systems. Thicker web plates ... -
Development and Experimental Validation of the Direct Strength Method for Cold-Formed Steel Beam-Columns
(American Society of Civil Engineers, 2018)The direct strength method of cold-formed steel member design uses local, distortional, and global cross-section elastic buckling analysis with empirically derived direct expressions to predict member strength. The direct ... -
Maximum and Residual Flexural Crack Width Estimation in Reinforced Concrete Frame Members under Seismic Excitation
(American Society of Civil Engineers, 2018)During strong seismic excitations, reinforced concrete (RC) frame members experience several cycles of nonlinear response that may result in large cracks. At the end of the excitation, the residual member crack widths are ... -
Seismic Performance of Single-Story Precast Buildings: Effect of Cladding Panels
(American Society of Civil Engineers, 2018)In reinforced concrete industrial precast structures, one of the most common forms of seismic damage is the collapse of the cladding panels because of the failure of the panel-to-structure connections. This damage is caused ... -
Shaking Table Tests on 1/3-Scale Model of Wooden Horizontal Hybrid Structure
(American Society of Civil Engineers, 2018)In 21, the Japanese government issued a law to promote the utilization of wood in public buildings. In response, the Architectural Institute of Japan presented several designs of large-scale wooden structures including a ... -
Path Dependence in OSB Sheathing-to-Framing Nailed Connection Revealed by Biaxial Testing
(American Society of Civil Engineers, 2018)Oriented strand board (OSB) sheathing-to-wood framing connections, as typically used in light-frame shear walls, were experimentally examined in a novel biaxial test setup with respect to possible path dependence of the ... -
Hybrid Simulation Method for a Structure Subjected to Fire and Its Application to a Steel Frame
(American Society of Civil Engineers, 2018)This paper presents a hybrid fire simulation method for civil structures in which a critical element subject to fire is experimentally tested while the remaining structural system is numerically analyzed simultaneously. ...