Journal of Structural Engineering: Recent submissions
Now showing items 1901-1920 of 10765
-
Out-Plane Elastic-Plastic Buckling Strength of High-Strength Steel Arches
(American Society of Civil Engineers, 2018)Little research has been reported for the out-plane elastic-plastic buckling strength of high-strength steel (HSS) arches and no adequate code provisions are available for their strength design, despite HSS structures being ... -
Elastic Velocity Damping Model for Inelastic Structures
(American Society of Civil Engineers, 2018)An alternative inherent damping model for inelastic vibrations is presented in which the damping matrix is represented by [c˜]=[kT][k]−1[c][k]−1[kT], where [k] is the initial stiffness matrix, [kT] is the tangent stiffness ... -
Untitled
(American Society of Civil Engineers, 2018)This study investigates the seismic performance of buildings with fluid viscous damping systems designed in accordance with the procedures of ASCE/SEI 7-16. The study examines the effect of the following design parameters: ... -
Design of Cold-Formed High-Strength Steel Tubular Stub Columns
(American Society of Civil Engineers, 2018)This paper presents the numerical investigation of the compressive behavior of cold-formed high-strength steel (HSS) tubular stub columns. The nominal .2% proof stresses of the high-strength steel are 7, 9, and 1,1 MPa. ... -
Untitled
(American Society of Civil Engineers, 2018)Practical models for the deformations of flexure-controlled reinforced concrete (RC) members at flexural yielding and at ultimate conditions and for their secant-to-yield-point stiffness were developed using a database of ... -
Refined Softened Truss Model with Efficient Solution Procedure for Prestressed Concrete Membranes
(American Society of Civil Engineers, 2018)This article presents a refinement of the rotating-angle softened truss model (RA-STM) for prestressed concrete (PC) membrane elements. To refine the RA-STM, an efficient solution procedure to solve the set of nonlinear ... -
Experimental Investigation of Buckling Restrained Braces for Bridge Bidirectional Ductile End Diaphragms
(American Society of Civil Engineers, 2018)Quasi-static experiments were conducted to subject buckling restrained braces (BRBs) to a regime of relative end displacements demands to investigate if the BRBs’ end connections could be able to sustain the required ... -
Measuring Total Transverse Reference-Free Displacements for Condition Assessment of Timber Railroad Bridges: Experimental Validation
(American Society of Civil Engineers, 2018)Today, the railroad industry carries 4% of the United States’ total freight ton-miles over 1, bridges spanning over 225, km (14, mi) of rail tracks and the demand for railroads will increase by 88% by 235. Railroads ... -
Predicting the Onset of Instability in Steel Columns Subjected to Earthquakes Followed by Nonuniform Longitudinal Temperature Profiles
(American Society of Civil Engineers, 2018)Historical earthquake events have demonstrated the destructive potential of postearthquake fire and the vulnerability of structural systems to such multiple events. Current well-established seismic design provisions, ... -
Mixed 3D Beam Element with Damage Plasticity for the Analysis of RC Members under Warping Torsion
(American Society of Civil Engineers, 2018)This paper describes the simulation of RC members with a three-dimensional (3D), 2-node beam finite element (FE) that includes warping of the cross section. A previously proposed FE formulation is extended to allow the ... -
Effect of Climate Change on Hurricane Damage and Loss for Residential Buildings in Miami-Dade County
(American Society of Civil Engineers, 2018)This paper investigates the potential effect of climate change on future hurricanes and the corresponding losses in residential buildings. Four climate change scenarios projected by the United Nations Intergovernmental ... -
Seismic Assessment of Existing Steel Chevron Braced Frames
(American Society of Civil Engineers, 2018)The seismic response of existing, nonductile 3- and 1-story steel chevron braced frames is examined to identify potential deficiencies. The structures are located on the west coast of Canada. They were designed in accordance ... -
Behavior of Concrete-Filled Circular, Square, Rectangular, and Elliptical Hollow Columns Subjected to Fire
(American Society of Civil Engineers, 2018)This paper presents and discusses the results of experiments on the behavior of composite columns made of concrete-filled hollow sections subjected to fire and restrained thermal elongation. Several parameters that may ... -
Experimental Testing of Reinforced ECC Beams Subjected to Various Cyclic Deformation Histories
(American Society of Civil Engineers, 2018)Steel-reinforced engineered cementitious composite (ECC) members have demonstrated enhanced seismic performance in structural components and systems such as coupling beams, infill panels, joints, columns, and beams. Because ... -
Shear-to-Moment Interaction in Glass Beams with Open Cross Sections
(American Society of Civil Engineers, 2018)An experimental investigation regarding the flexural behavior of glass beams with a length of 1,2 mm and rectangular, T-shaped, or I-shaped cross sections is presented and discussed. T-shaped and I-shaped cross sections ... -
Windward Snow Drift Loads
(American Society of Civil Engineers, 2018)Windward snow drifts are an important consideration for many roof geometrics, including roof steps, parapet walls, and various roof projections. Current code provisions for windward roof snow drifts are based upon a database ... -
Hysteretic Bond Stress-Slip Response of Deformed Bars in Concrete under Uniaxial Lateral Pressure
(American Society of Civil Engineers, 2018)The bond stress-slip relation between steel bars and concrete under reversed loading is very important for the seismic analysis and rehabilitation of concrete structures. In this study, an experimental investigation has ... -
Local and Distortional Biaxial Bending Capacities of Cold-Formed Steel Storage Rack Uprights
(American Society of Civil Engineers, 2018)Cold-formed steel storage rack-supported buildings, also referred to as clad racks, support both the building enclosure and the stored goods. Because of combined actions of wind loading and stored pallets, uprights undergo ... -
Experimental Evaluation of Replaceable Energy Dissipation Connection for Moment-Resisting Composite Steel Frames
(American Society of Civil Engineers, 2018)There is increasing recognition that conventional ductility-based design of structures for collapse prevention may not be sufficient in a modern society that demands higher-performing alternatives. Such a reality has ... -
High-Strength Rectangular CFT Members: Database, Modeling, and Design of Short Columns
(American Society of Civil Engineers, 2018)AISC 36-16 (the current AISC Specification) does not endorse the use of high-strength materials (Fy≥525 MPa and fc′≥7 MPa) for concrete-filled steel tube (CFT) columns because of a lack of adequate research and comprehensive ...