Journal of Structural Engineering: Recent submissions
Now showing items 1921-1940 of 10765
-
System Reliability Benefits of Repetitive Framing in Cold-Formed Steel Floor Systems
(American Society of Civil Engineers, 2018)Typical cold-formed steel floor systems involve many repetitive joist members laid in parallel, yet the design specifications are based upon the reliability of individual members and fail to account for the potential ... -
Numerical Study of Bond and Development of Column Longitudinal Reinforcement Extended into Oversized Pile Shafts
(American Society of Civil Engineers, 2018)This paper presents a numerical investigation to examine the bond-slip behavior of column longitudinal reinforcing bars embedded in oversized pile shafts and to determine the minimum embedment length required for the column ... -
Joint Slip Formulation Based on Experimental Results in Wind Turbine Lattice Towers
(American Society of Civil Engineers, 2018)The primary cause of joint slip is the construction clearance between the bolt shank and the bolt hole at assembly. Slippage corresponds to the relative displacement of a bolted joint under loads. To the best of the authors’ ... -
Investigating the Hysteretic Behavior of Cross-Laminated Timber Wall Systems due to Connections
(American Society of Civil Engineers, 2018)Cross-laminated timber (CLT) wall systems are composed of massive timber panels that are fastened together and to the horizontal elements (foundations or intermediate floors) with step joints and mechanical connections. ... -
Two-Story Perforated URM Wall Subjected to Cyclic In-Plane Loading
(American Society of Civil Engineers, 2018)The testing program reported herein was designed to provide experimental results from a structure relevant to the type and form of unreinforced masonry (URM) buildings that are commonly found in several countries. The ... -
Effects of High Strain Rates on the Response of Glulam Beams and Columns
(American Society of Civil Engineers, 2018)A material predictive model that accounts for strain-rate effects and captures the effect of variable axial load on the dynamic response of glulam structural members subjected to combined lateral-blast and axial loading ... -
Quantifying Socioeconomic Impact of a Tornado by Estimating Population Outmigration as a Resilience Metric at the Community Level
(American Society of Civil Engineers, 2018)Policymakers, community leaders, engineers, and researchers have gained interest in understanding tornado-resilient buildings, in part because of the number of deadly and destructive tornadoes over the last decade. In ... -
Periodic Assembly of Steel Truss Systems for Efficient Analyses and Early Detection of Localized Damage Using Impulse Response Method
(American Society of Civil Engineers, 2018)In this paper, the design of truss systems configured with a periodic pattern is proposed for obtaining the frequency response of truss units by the recursive finite-element method and monitoring their variations with ... -
New Spread Plasticity Model for Reinforced Concrete Structural Elements Accounting for Both Gravity and Lateral Load Effects
(American Society of Civil Engineers, 2018)The spread plasticity models that are generally used for nonlinear analysis include the uniform, linear, and, more recently, power spread plasticity models. Because all of these models are formulated from a linear moment ... -
Softened Damage-Plasticity Model for Analysis of Cracked Reinforced Concrete Structures
(American Society of Civil Engineers, 2018)This paper develops a new damage-plasticity model considering the compression-softening effect of RC. The model is based on the framework of a two-scalar damage-plasticity model, and adopts the elastoplastic damage energy ... -
Validation of a Numerical Model for Prediction of Out-of-Plane Instability in Ductile Structural Walls under Concentric In-Plane Cyclic Loading
(American Society of Civil Engineers, 2018)Instability failure (also referred to as out-of-plane instability) has been observed in several experimental studies conducted on seismic performance of rectangular structural walls under in-plane loading. Observation of ... -
Hysteretic Performance of Self-Centering Glulam Beam-to-Column Connections
(American Society of Civil Engineers, 2018)This paper investigates the hysteretic performance of self-centering beam-to-column connections for glulam structures. Such connections incorporate a posttensioned high-strength steel strand to provide recentering capability, ... -
Assessing Immediate and Time-Dependent Instantaneous Stiffness of Cracked Reinforced Concrete Beams Using Residual Cracks
(American Society of Civil Engineers, 2018)Under normal in-service conditions, beams and slabs in reinforced concrete structures are usually cracked. Concrete cracking and steel-concrete bond damage lead to an irreversible reduction in the overall stiffness, thereby ... -
Theoretical Study of Ductile Fracture in Steel Structures in the Presence of Spatial Variability in Toughness
(American Society of Civil Engineers, 2018)Micromechanical or local models are increasingly used for predicting microvoid-growth–induced ductile fracture in structural steel components. Methods to calibrate and apply these models presume that both calibration ... -
Seismic Resilience of Water Distribution and Cellular Communication Systems after the 2015 Gorkha Earthquake
(American Society of Civil Engineers, 2018)The seismic resilience of civil infrastructure systems has a direct effect on the resilience of communities. These systems provide communities with essential services, including potable water and electric power. It is, ... -
Time-Dependent Response of Flush Endplate Connections to Fire Temperatures
(American Society of Civil Engineers, 2018)This paper summarizes results of a comprehensive computational study on the time-dependent or creep behavior of flush endplate beam-column connections subjected to elevated temperatures due to fire. Using a connection ... -
Highly Ductile Limits for Deep Steel Columns
(American Society of Civil Engineers, 2018)The collapse behavior of individual deep columns subjected to realistic loading and boundary conditions is investigated in this study. Loading protocols that are representative of seismic demands on first-story columns are ... -
Orienting Ground Motion Inputs to Achieve Maximum Seismic Displacement Demands on Electricity Transmission Towers in Near-Fault Regions
(American Society of Civil Engineers, 2018)This investigation was focused on developing an approximate approach for properly orienting ground motion inputs to achieve the maximum displacement demands on electricity transmission towers in the near-fault regions. The ... -
Seismic Retrofit of Real Beam-Column Joints Using Fiber-Reinforced Cement Composites
(American Society of Civil Engineers, 2018)This paper studies the seismic behavior of old-style reinforced concrete beam-column joints and the effectiveness of an innovative application of fiber-reinforced concrete (FRC) as a seismic strengthening solution. Two ... -
Shake Table Studies and Analysis of a PT-UHPC Bridge Column with Pocket Connection
(American Society of Civil Engineers, 2018)This study conducts shake table studies and analysis of a large-scale novel posttensioned (PT) precast bridge column connected to a precast footing with a pocket connection. The primary objective is to develop a resilient ...