Journal of Structural Engineering: Recent submissions
Now showing items 1941-1960 of 10765
-
Modeling Cracks of Reinforced Concrete Slabs under Fire Conditions
(American Society of Civil Engineers, 2018)Under fire conditions, the formation of large cracks within reinforced concrete floor slabs may significantly reduce the fire resistance of buildings. At present very little research has been done for modeling integrity ... -
Exterior RC Wide Beam–Column Connections: Effect of Spandrel Beam on Seismic Behavior
(American Society of Civil Engineers, 2018)This paper presents the results of a set of experiments performed on four large-scale exterior wide beam–column connections. The beam and column geometry and reinforcement detailing are identical for all four specimens, ... -
Seismic Performance Assessment of Corroded Reinforced Concrete Short Columns
(American Society of Civil Engineers, 2018)This paper presents an experimental study carried out on eight full-scale uncorroded and corroded reinforced concrete short columns subjected to the simulated seismic loading to investigate effects of corrosion on the ... -
Geometric Imperfection Measurements and Validations on Cold-Formed Steel Channels Using 3D Noncontact Laser Scanner
(American Society of Civil Engineers, 2018)A three-dimensional (3D) noncontact laser-scanning method to quantify the deviations in cold-formed steel (CFS) channel sections (plain and lipped) is presented. The methodologies to segregate the different categories of ... -
Distribution of Wind Loads in Metal-Clad Roofing Structures
(American Society of Civil Engineers, 2018)The roof is the part that experiences the largest wind load and is usually the most vulnerable part of a house. However, data on how the wind loads are transferred through the roof structure are scarce. The fluctuating ... -
Untitled
(American Society of Civil Engineers, 2018)Current methods for designing steel structures, such as load and resistance factor design (LRFD) are based on safety checks of individual members derived from elastic analysis. The next generation of steel design methods ... -
Parametric Finite-Element Modeling for Exposed Steel Moment Frame Column Baseplate Connections Subjected to Lateral Loads
(American Society of Civil Engineers, 2018)The behavior of steel column baseplate connections in moment frames subjected to lateral loads has been the subject of numerous experimental investigations, giving rise to a variety of methods for determining strength and ... -
Component and Cladding Wind Loads for Low-Slope Roofs on Low-Rise Buildings
(American Society of Civil Engineers, 2018)The component and cladding wind load provisions for low-sloped roofs on low-rise buildings in ASCE 7-1 were examined using measured pressure data from an aerodynamic database. It was found that both the design pressure ... -
Experimental and Numerical Evaluation of Older Chevron Concentrically Braced Frames with Hollow and Concrete-Filled Braces
(American Society of Civil Engineers, 2018)Detailed seismic provisions for concentrically braced frames have evolved continuously since 1988. Thus, vintage-era braced frames, especially those designed prior to 1988, may be prone to a number of significant deficiencies. ... -
Laboratory Testing of Strengthened Cavity Unreinforced Masonry Walls
(American Society of Civil Engineers, 2018)An experimental campaign consisting of nine pressure-controlled quasi-static airbag tests on unreinforced masonry (URM) walls and accompanying material testing was completed to investigate methods for seismic retrofit of ... -
Continuum Analysis Approach for Rocking Core-Moment Frames
(American Society of Civil Engineers, 2018)Rocking core-moment frame (RCMF) combinations are structural assemblies that are capable of collapse prevention, recentering, avoiding soft story failure, and large residual deformation. Although several such systems have ... -
Testing of Buckling-Restrained Braces with Replaceable Steel Angle Fuses
(American Society of Civil Engineers, 2018)This research focuses on a new type of buckling-restrained brace (BRB) with replaceable steel angle fuses. The proposed BRB offers ease of postearthquake examination of fuse damage, convenient and prompt replacement of ... -
Probabilistic Prediction of Postdisaster Functionality Loss of Community Building Portfolios Considering Utility Disruptions
(American Society of Civil Engineers, 2018)This study proposes a framework for the probabilistic prediction of building portfolio functionality loss (BPFL) in a community following an earthquake hazard. Building functionality is jointly affected by both the structural ... -
Sensitivity Analysis for Displacement-Controlled Finite-Element Analyses
(American Society of Civil Engineers, 2018)Displacement-controlled finite-element analyses are typically employed to simulate the nonlinear static response of structural systems where a loss of load carrying capacity due to localized material failure and/or geometric ... -
Estimating Plastic Strain and Residual Strain Capacity of Earthquake-Damaged Steel Reinforcing Bars
(American Society of Civil Engineers, 2018)Modern seismic codes are based on capacity design and the hierarchy of strength philosophy that allows inelastic response in case of severe earthquakes. Thus, in most traditional systems, earthquake damage develops at ... -
Effectiveness of Polypropylene and Steel Fibers in Enhancing Fire Resistance of High-Strength Concrete Columns
(American Society of Civil Engineers, 2018)Fire-induced spalling is one of the concerns with the use of high-strength concrete (HSC) in structural applications. Some recent studies have recommended addition of polypropylene and/or steel fibers to overcome such ... -
High-Strength Concrete Masonry Walls under Concentric and Eccentric Loadings
(American Society of Civil Engineers, 2018)Masonry walls and columns are common structural members that typically resist compressive loads, with a number of such members being required to resist combined axial load and out-of-plane bending due to direct out-of-plane ... -
Experimental Evaluation of Influence of Member Thickness, Anchor-Head Size, and Orthogonal Surface Reinforcement on the Tensile Capacity of Headed Anchors in Uncracked Concrete
(American Society of Civil Engineers, 2018)Cast-in-place headed anchors with different head sizes embedded in plain and reinforced concrete members of various thicknesses were subjected to pullout tests. The influence of member thickness, anchor-head size, and ... -
Strut-and-Tie Modeling of Reinforced Concrete Deep Beams
(American Society of Civil Engineers, 2018)Strut-and-tie models (STMs) are often used for the design of shear critical deep members because they can rationalize the shear transfer within discontinuous or disturbed regions in reinforced concrete structural elements. ... -
A Prediction Model for Bond Deterioration in RC Members. II: Bond Failure after Flexural Yielding
(American Society of Civil Engineers, 2018)Reinforced concrete (RC) structures are designed in such a way that flexural yielding precedes bond failure, in order to ensure the ductile behavior of members. When subject to cyclic loading including seismic loads, brittle ...