Journal of Structural Engineering: Recent submissions
Now showing items 1881-1900 of 10765
-
Closure to “Beam-to-CFT High-Strength Joints with External Diaphragm. II: Numerical Simulation of Joint Behavior” by Cristian Vulcu, Aurel Stratan, Adrian Ciutina, and Dan Dubina
(American Society of Civil Engineers, 2018) -
Single-Angle Compression Members with Both Legs Bolted at the Ends: Design Implications from an Experimental Study
(American Society of Civil Engineers, 2018)Single-angle compression members are widely used in civil structures. However, determination of the compressive strength of a single-angle compression member based on the classic stability theory and with an explicit ... -
Residual Flexural Capacity and Performance Assessment of Corroded Reinforced Concrete Beams
(American Society of Civil Engineers, 2018)This paper presents an approach for evaluating concrete cracking growth and structural resistance deterioration due to reinforcement corrosion and for predicting future structural performance during the service life of the ... -
Static Test and Seismic Dynamic Response of an Innovative 3D Seismic Isolation System
(American Society of Civil Engineers, 2018)Seismic isolation is an efficient strategy to protect structures from the effects of moderate to severe earthquake shaking. Conventional isolation devices can reduce the structural response in horizontal directions only; ... -
Method for Decoupling and Correction of Dynamical Signals in High-Frequency Force Balance Tests
(American Society of Civil Engineers, 2018)High-frequency force balance (HFFB) technology is a popular experimental method for investigating dynamic wind loading and wind-induced response of high-rise buildings. A decoupling matrix obtained from static calibration ... -
Influence of Wind Tunnel Test Duration on Wind Load Factors
(American Society of Civil Engineers, 2018)A method is presented for calculating the uncertainty associated with the estimation of peak pressure coefficients from wind tunnel test records of various lengths and how this uncertainty influences design wind effects. ... -
Design of SupaCee Sections Subject to Web Crippling under One-Flange Load Cases
(American Society of Civil Engineers, 2018)Cold-formed steel sections are generally used as flexural members in lightweight steel construction. The SupaCee section is an innovative section introduced recently to the Australian building sector. It provides superior ... -
Fatigue Assessment of Fiber-Reinforced Concrete Using 1,200-mm Diameter Round Panels
(American Society of Civil Engineers, 2018)The fatigue performance of concrete in response to high-cycle repetitive loading is important for concrete road pavements and other concrete elements such as railway sleepers, offshore structures, and wind turbines subject ... -
New Method for Real-Time Hybrid Testing with a Global Iteration Strategy
(American Society of Civil Engineers, 2018)In current real-time hybrid testing (RTHT), command displacement is applied to the experimental substructure and a restoring force is fed back to the integration algorithm at each time step between the numerical and physical ... -
Design Approach for Flexural Capacity of Prestressed Concrete Beams with External Tendons
(American Society of Civil Engineers, 2018)Due to a lack of bonds between external tendons and adjacent concrete and the potential variation in the eccentricities of the tendons (second-order effect), the analysis of the ultimate strength behavior of externally ... -
State-of-the-Art Review on Damping in Wood-Frame Shear Wall Structures
(American Society of Civil Engineers, 2018)Wood-frame shear wall structures are commonly used for residential and nonresidential buildings. Extensive research has been performed on these structures to accurately model their behavior due to dynamic loads. Among the ... -
Experimental Comparison of Dynamic Behavior of Structures with a Particle Damper and a Tuned Mass Damper
(American Society of Civil Engineers, 2018)This paper investigates the dynamic behavior of structures with a particle damper (PD) and a tuned mass damper (TMD) by shaking table tests and aeroelastic wind tunnel tests. The influence of parameters including seismic ... -
Flexural Capacity of Reinforced Strain-Hardening Cementitious Composite Beams: Experimental Results and Analysis
(American Society of Civil Engineers, 2018)The results of an experimental investigation of steel-reinforced beams comprising fiber-reinforced strain-hardening cementitious composites are presented. Polyvinyl alcohol fibers were used in the cementitious mix to achieve ... -
Three-Dimensional Benchmark Problems for Design by Advanced Analysis: Impact of Twist
(American Society of Civil Engineers, 2018)Design codes for steel structures continue to provide additional opportunities for the use of more advanced methods of nonlinear analysis. As the complexity of the analysis increases, it becomes more important for the ... -
Fiber-Based Nonlocal Formulation for Simulating Softening in Reinforced Concrete Beam-Columns
(American Society of Civil Engineers, 2018)A nonlocal formulation framework is presented to address mesh-dependent strain localization in displacement-based frame element models in the presence of constitutive softening. The framework consists of a nonlocal ... -
Experimental Study and Numerical Analysis of CFSST Columns Subjected to Lateral Cyclic Loading
(American Society of Civil Engineers, 2018)An experimental study and numerical modeling were carried out to investigate the behavior of concrete-filled stainless-steel tube (CFSST) columns subjected to constant axial compression combined with lateral cyclic loading. ... -
Seismic Response and Damage of Reduced-Strength Steel MRF Structures with Nonlinear Viscous Dampers
(American Society of Civil Engineers, 2018)An experimental investigation of the seismic response and damage of steel moment resisting frame (MRF) building structures with nonlinear viscous dampers was conducted using ground motions up to and beyond the maximum ... -
Modeling of Reinforced Concrete Two-Way Floor Slab Deflections due to Construction Loading
(American Society of Civil Engineers, 2018)An analytical algorithm was developed to compute the midpanel deflection history for reinforced concrete two-way floor slabs in multistory buildings. Midpanel deflection was determined using the crossing beam analogy, in ... -
Closure to “Experimental Evaluation of Single-Bolted Lap Joints at Elevated Temperatures” by Erica C. Fischer, Amit H. Varma, and Qiaqia Zhu
(American Society of Civil Engineers, 2018)