Journal of Structural Engineering: Recent submissions
Now showing items 1421-1440 of 10765
-
Enhanced Rayleigh Damping Model for Dynamic Analysis of Inelastic Structures
(ASCE, 10/1/2020 )This paper presents an Enhanced Rayleigh damping model for dynamic analysis of inelastic structures. The conventional Rayleigh damping model has been extensively used to represent inherent energy dissipation sources in ... -
Closed-Form Solutions for Quantifying the Ductility of Concrete Beams with Passively Restrained Concrete
(ASCE, 8/1/2020 1)The ductility of a beam is important in reinforced concrete member design at the ultimate limit state, especially in resisting dynamic loads such as those from earthquakes or blasts. Concrete confinement reinforcement, ... -
Local Buckling in Cold-Formed Steel Moment-Resisting Bolted Connections: Behavior, Capacity, and Design
(ASCE, 9/1/2020 1)The research presented in this paper aimed to investigate local buckling failure occurring adjacent to moment-resisting bolted connections in cold-formed steel back-to-back channel beams connected to a gusset plate through ... -
Copula-Based Quantification of Probabilistic Dependence Configurations of Material Parameters in Damage Constitutive Modeling of Concrete
(ASCE, 9/1/2020 1)The constitutive model of concrete is the key basis for nonlinear analysis of concrete structures under disastrous dynamic actions, e.g., earthquakes. The material parameters of the constitutive model of concrete are ... -
Behavior and Design of Normal- and High-Strength Steel SHS and RHS Columns
(ASCE, 11/1/2020 )The behavior and design of hot-rolled and cold-formed steel square and rectangular hollow section (SHS and RHS) columns, made of both normal- and high-strength material, are addressed in this paper. A series of experiments ... -
Prediction of Dowel Action against Concrete Core without Consideration of Transverse Reinforcement
(ASCE, 12/1/2020 )In this study, reinforcing bars acting as dowels were investigated. Direct shear tests on specimens with a wide range of strengths for concrete (30 and 60 MPa) and steel (400 and 600 MPa) were conducted. Furthermore, ... -
Macroscopic Model for Spatial Timber Plate Structures with Integral Mechanical Attachments
(ASCE, 10/1/2020 )The use of integral mechanical attachments (IMAs) in spatial free-form timber plate structures has been revitalized by the production of engineered boards and recent developments in digital fabrication and computer-aided ... -
Experimental Investigation on Rehabilitation of Corroded RC Columns with BSP and HPFL under Combined Loadings
(ASCE, 8/1/2020 1)This research focuses on evaluating the seismic properties of corrosion-damaged RC columns strengthened by bonded steel plate (BSP) and high-performance ferrocement laminate (HPFL). The mechanical properties are experimentally ... -
Punching Shear Behavior of an Innovative Connection between Steel-Tubular Column and Flat-Concrete Slab
(ASCE, 8/1/2020 1)This paper presents the results of an experimental investigation into the punching shear behavior of an innovative simple and effective shear connection method between steel-tubular column and flat-concrete slab using ... -
Comparative Study on Cold-Formed Steel Single-Stud and Multiple-Studs Wall Panels with Magnesium Oxide Sheathing under Axial Loading: Experimental and Analytical
(ASCE, 11/1/2020 )A comprehensive study has been carried out experimentally and analytically on the axial performance of sixteen (16 nos.) cold-formed steel (CFS) wall panels including one bare CFS wall frame, sheathed CFS walls, and ... -
Large-Scale Experimental Testing and Numerical Modeling of Floor-to-Frame Connections for Controlled Rocking Steel Braced Frames
(ASCE, 8/1/2020 1)Controlled rocking steel braced frames (CRSBFs) are low-damage lateral force resisting systems that mitigate structural damage through a controlled rocking mechanism. Critical to the safety and low-damage nature of these ... -
Full-Range Shear Behavior of a Nonprismatic Beam with Steel Trapezoidal Corrugated Webs: Experimental Tests and FE Modeling
(ASCE, 8/1/2020 1)This paper presents the first experimental and numerical investigation of the full-range shear behavior of a nonprismatic overhanging beam with concrete slabs and steel trapezoidal corrugated webs. The results showed that ... -
Probabilistic Compressive Strength of Stiffened Steel Plates Exhibiting Column-Like Behavior: Ultimate and Serviceability Limit States
(ASCE, 9/1/2020 1)The strength of longitudinally continuous stiffened steel plates, exhibiting column-like behavior under uniaxial compression, was investigated at ultimate as well as serviceability limit states. Compressive strengths were ... -
Seismic Performance Factors for Cross-Laminated Timber Shear Wall Systems in the United States
(ASCE, 9/1/2020 1)Seismic force resisting systems based on cross-laminated timber (CLT) shear walls have garnered considerable attention for in mid-rise construction around the world. The purpose of this study was to determine seismic ... -
Strength of Partial-Joint-Penetration Groove Welds as Affected by Root Opening, Reinforcing, and Loading Direction
(ASCE, 8/1/2020 1)Testing of 21 single-sided partial-joint-penetration (PJP) groove weld specimens was performed to evaluate the effects of three parameters: (1) root opening, (2) weld reinforcing profiles, and (3) directionality ... -
Impact of Brace Fracture on Column Splice Demands in Braced Frames
(ASCE, 8/1/2020 1)Braces made of square hollow structural sections (HSSs) in special concentrically braced frames (SCBFs) are likely to fracture under expected demand levels. This study, therefore, examines the additional seismic demands ... -
Design and Optimization of Cold-Formed Steel Sections in Bolted Moment Connections Considering Bimoment
(ASCE, 8/1/2020 1)The load transfer mechanism in cold-formed steel (CFS) bolted moment connections is mainly through the bolt group in the web of beam elements, which may lead to relatively large bimoment and warping deformations. While the ... -
Experimental and Numerical Investigation on Progressive Collapse Resistance of Post-Tensioned Precast Concrete Beam-Column Subassemblages
(ASCE, 9/1/2020 1)In this paper, four 1/2 scaled precast concrete (PC) beam-column subassemblages with high-performance connection were tested under push-down loading procedure to study the load-resisting mechanism of PC frames subjected ... -
Unstiffened Elements as Limiting Case of Distortional Buckling of Partially Stiffened Elements
(ASCE, 9/1/2020 1)Lip stiffened flanges in cold-formed steel compression members may undergo local or distortional buckling depending on the slenderness of the flange and rigidity of the lip. In distortional buckling, the flange-lip assembly ... -
Ultimate Capacity of Undercut Fasteners Installed in Heat-Damaged Concrete
(ASCE, 11/1/2020 )The ultimate behavior and bearing capacity of undercut fasteners installed in heat-damaged concrete are investigated in this paper in which the results of a rather comprehensive research project are presented. Sixty-one ...