Journal of Structural Engineering: Recent submissions
Now showing items 1241-1260 of 10765
-
Development and Application of Spring Hinge Models to Simulate Reinforced Ductile Concrete Structural Components under Cyclic Loading
(ASCE, 2/1/2021)Ductile concrete materials with randomly oriented fibers have been studied to improve the strength, displacement capacity, and damage tolerance of reinforced concrete structural components in seismic applications. ... -
Seismic Performance of Concrete Columns Reinforced with Weakly Bonded Ultrahigh-Strength Longitudinal Bars
(ASCE, 1/1/2021)This paper presents an investigation of the seismic performance of concrete columns reinforced longitudinally with steel bars (referred to as UHS-WB bars) that have an ultrahigh strength and a low bond strength. Nine ... -
Probabilistic Framework with Bayesian Optimization for Predicting Typhoon-Induced Dynamic Responses of a Long-Span Bridge
(ASCE, 1/1/2021)The long-span bridge, characterized by slenderness and flexibility, is particularly sensitive to wind action. Extreme wind events, including typhoons and hurricanes, will threaten the safety and serviceability of long-span ... -
Data-Driven Models for Predicting the Shear Strength of Rectangular and Circular Reinforced Concrete Columns
(ASCE, 1/1/2021)Predicting the shear strength of structural elements subjected to gravity loads and ground motions is an important component of seismic design. Among all primary structural components, the vital role of columns in load ... -
Story-Based Stability of Multistory Steel Semibraced and Unbraced Frames with Semirigid Connections
(ASCE, 1/1/2021)A simplified method is proposed for evaluating the stability of multistory, steel, semibraced, and unbraced frames with semirigid connections. The proposed method decomposes a frame into individual stories and evaluates ... -
Improved Applied Element Model for Bonded Prestressed Concrete Structures
(ASCE, 1/1/2021)The current study introduces an extension for the multilayered improved applied element method to provide a tool for bonded prestressed concrete structures. In the new extension, a new layer has been implemented to represent ... -
Novel Finite Element Analysis of Curved Concrete Box Girders Using Hybrid Box Elements
(ASCE, 1/1/2021)Horizontally curved concrete bridges are widely used in urban viaducts and overpasses all over the world. A box cross-section is often used in curved concrete girders because of its high resistance to both bending and ... -
Avoiding Shear Failures and Excessive Deflection of Concrete Flat Plates
(ASCE, 1/1/2021)The paper presents an up-to-date procedure to design shear-resistant concrete flat plates of optimum thickness. Excessive long-term deflection is avoided by the reliable prediction of probable deflection while accounting ... -
Load Limiters on Temporary Shoring Structures: Tests on a Full-Scale Building Structure under Construction
(ASCE, 3/1/2021)Temporary shoring structures are used in the construction of reinforced concrete buildings to transmit the loads of newly poured slabs onto the lower floors. The main problems involved in the use of shores/props are: ... -
Residual Clamping Force for Corroded Tension-Control Bolts
(ASCE, 3/1/2021)This study investigated the residual clamping force for corroded tension-control bolts and the effect of each part on force reduction. A finite-element analysis revealed that bolt head section loss, and in particular bolt ... -
Tensile Behavior of Groups of Double-Headed Anchored Blind Bolts within Concrete-Filled Square Hollow Sections under Cyclic Loading
(ASCE, 3/1/2021)In this paper, the cyclic behavior of groups of double-headed anchored blind bolts (DHABBs), which are anchored within concrete-filled square hollow sections (CFSHSs), is investigated. The DHABB used in this study consists ... -
Lateral Torsional Buckling of Welded Stainless Steel I-Profile Beams: Experimental Study
(ASCE, 3/1/2021)In this paper, an experimental program is presented consisting of 13 experiments on welded stainless steel I-profile beams subjected to lateral torsional buckling, in which 11 specimens are made of the lean duplex stainless ... -
Experimental Investigation of the Seismic Behavior of Low-Yield-Point Corrugated Steel Plate Dampers
(ASCE, 2/1/2021)In this paper, an innovative low-yield-point corrugated steel plate damper (LCSPD) was proposed, which consisted of two corrugated webs as the shear component and two outer corrugated plates as the bending component. Four ... -
Experimental Evaluation of Full-Scale URM Buildings Strengthened Using Surface-Mounted Steel Bands
(ASCE, 2/1/2021)Construction of unreinforced masonry (URM) buildings has been a common practice in many countries. Strengthening of such buildings located in seismically active regions has become extremely important. Although numerous ... -
Cyclic Loading Test for Two-Story RC Moment Frames Retrofitted with Internal Steel Frames
(ASCE, 2/1/2021)An internal steel frame–retrofitting method without diagonal braces was studied to strengthen existing reinforced-concrete (RC) moment frames with nonseismic details. For better constructability and structural capacity, a ... -
Performance-Based Assessment and Structural Response of 20-Story SAC Building under Wind Hazards through Collapse
(ASCE, 3/1/2021)With the increasing occurrence of extreme wind events (e.g., hurricanes) and growing interest in performance-based wind engineering, a better understanding of the structural response and collapse under extreme wind ... -
Advancing the Design of Resilient and Sustainable Buildings: An Integrated Life-Cycle Analysis
(ASCE, 3/1/2021)A holistic evaluation of a building’s environmental impact must include a thorough accounting of both its operating and embodied energies, inclusive of the influence of hazard-induced damage and repairs. Unfortunately, ... -
Capacity and Failure-Mode Prediction of Mass Timber Panel–Concrete Composite Floor System with Mechanical Connectors
(ASCE, 2/1/2021)Lack of design standards and guidelines is the most important barrier limiting widespread use of mass timber panel–concrete (MTPC) composite floor systems, a preferred choice by designers in modern multistory mass timber ... -
Collapse-Resistant Performance of Long-Span Single-Layer Spatial Grid Structures Subjected to Equivalent Sudden Joint Loads
(ASCE, 1/1/2021)A dynamic experiment of progressive collapse constitutes the basis of a collapse-resistant analysis. To achieve broad applicability and avoid superfluous influencing factors, two representative substructures extracted from ... -
Reliability Analysis and Design Considerations for Exposed Column Base Plate Connections Subjected to Flexure and Axial Compression
(ASCE, 2/1/2021)Exposed column base plate (ECBP) connections are commonly used in steel moment resisting frames. Current approaches for their design are well-established from a mechanistic standpoint. However, the reliability of connections ...