Journal of Structural Engineering: Recent submissions
Now showing items 1221-1240 of 10765
-
Proposed Panel Zone Model for Seismic Design of Steel Moment-Resisting Frames
(ASCE, 4/1/2021)This paper proposes a new mechanics-based model for the seismic design of beam-to-column panel zone joints in steel moment-resisting frames. The model is based on realistic shear stress distributions retrieved from continuum ... -
Mechanics of Shear Failure in Fiber-Reinforced Concrete Beams
(ASCE, 3/1/2021)In this paper, a new model, which can be solved either numerically or analytically, is presented for predicting the shear strength of fiber-reinforced concrete beams. This approach is based on predicting the sliding capacity ... -
Open Access and Updated Human-Induced Load Data Set
(ASCE, 3/1/2021)This paper reports a dataset that provides force time histories of various types of human-induced loads, including walking, jumping, and bouncing activities guided by metronome or music. The dataset contains 3,518 records ... -
Experimental Study on Axial Compression Behavior on Circular Timber Columns Strengthened with CFRP Strips and Near-Surface Mounted Steel Bars
(ASCE, 3/1/2021)To investigate the working mechanism and reinforcement effectiveness of the ancient timber columns strengthened with carbon fiber reinforced polymer (CFRP) strips and near-surface mounted steel bars, in this paper, 42 ... -
Impact of a Fifty-Year-Recurrence Super Typhoon on Skyscrapers in Hong Kong: Large-Scale Field Monitoring Study
(ASCE, 3/1/2021)This paper investigates the impact of Super Typhoon Mangkhut on Hong Kong, especially the wind effects on high-rise buildings, based on 24-h-long field measurement records collected from the two tallest skyscrapers (484 ... -
Experimental Performance of a Full-Scale Spatial RC Frame with Buckling-Restrained Braces Subjected to Bidirectional Loading
(ASCE, 3/1/2021)To investigate the performance of a RC frame with buckling-restrained braces (RCF-BRB) subjected to bidirectional earthquakes, a full-scale two-story RCF-BRB was tested using substructural pseudodynamic, quasi-static, and ... -
Experimental Testing of a Low-Damage Post-Tensioned C-Shaped CLT Core-Wall
(ASCE, 3/1/2021)The development of strong and stiff lateral load-resisting systems (LLRS) is essential for mid-rise and high-rise timber buildings. On the other hand, within a seismic design philosophy, strength/stiffness and ductility/drift ... -
Comparisons of Aerodynamic Data with the Main Wind Force–Resisting System Provisions of ASCE 7-16. I: Low-Rise Buildings
(ASCE, 3/1/2021)This study assesses the wind load provisions for low-rise buildings with Chapters 27 and 28 in ASCE 7-16 and analyzes the dependence of the aerodynamics on the building geometric parameters. A systematic analysis of an ... -
Development of Mechanical Strengthening System for Bridge Connections Using Prestressed CFRP Rods
(ASCE, 3/1/2021)Stringer-to-floor beam web-to-web double-angle connections are among the most fatigue-prone elements in old riveted bridges. These connections are often designed to carry only shear loads. However, in these elements, fatigue ... -
Comparisons of Aerodynamic Data with the Main Wind Force–Resisting System Provisions of ASCE 7-16. II: Mid- and High-Rise Buildings
(ASCE, 3/1/2021)The purpose of this study is to investigate the effects of building geometry on tall-building aerodynamics, accompanying the analysis for low-rise buildings found in the companion paper. Aerodynamic data for total of 30 ... -
Innovative Computational Intelligence-Based Model for Vulnerability Assessment of RC Frames Subject to Seismic Sequence
(ASCE, 3/1/2021)Previous earthquakes have shown that for structures that experience a significant ground motion with only minor damage, there is a likelihood of severe damage or complete collapse during the aftershocks. Due to the importance ... -
Power-Actuated Fasteners Connecting Cold-Formed Sheet Steels under Monotonic Tension Loading
(ASCE, 3/1/2021)A total of 105 cross-tension tests were conducted to investigate the strength and behavior of power-actuated fastener (PAF) connections under quasi-static monotonic tensile loading. Three types of PAF were used to join ... -
Material Property Uncertainties versus Joint Structural Detailing: Relative Effect on the Seismic Fragility of Reinforced Concrete Frames
(ASCE, 4/1/2021)This paper investigates the relative effect of material properties and structural details in the joint panels on the seismic fragility of existing reinforced concrete (RC) frames. Five building classes with different ... -
Static Modeling of Plywood–Polyurethane Structural Insulated Panels in Bending
(ASCE, 2/1/2021)Structural insulated panels (SIPs) are thermally efficient, prefabricated structural elements that expedite on-site construction with a minimal number of skilled workers. This research aimed to model the time-independent ... -
Shake-Table Experimental Testing and Performance of Topped and Untopped Cross-Laminated Timber Diaphragms
(ASCE, 4/1/2021)This paper presents the behavior of floor diaphragms of a shake-table experiment of a full-scale 2-story mass-timber building structure. The structure consists of glued-laminated timber beams and columns, and floors and ... -
Estimating Exposure Roughness Based on Google Earth
(ASCE, 3/1/2021)Exposure roughness is significant in the evaluation of design wind loads. The roughness length (z0) is a key parameter to determine the exposure coefficient. In current wind load provisions, z0 is determined generally ... -
Calibration of Load and Resistance Factors of API RP 2A-LRFD, Second Edition, for Fixed Offshore Platforms
(ASCE, 2/1/2021)Fixed offshore platforms in the Gulf of Mexico (GoM) are traditionally designed following the working stress design (WSD) format, that is, the factor of safety approach. In 1993, the first reliability-based design standard ... -
Axial Compressive Behavior of Concrete-Encased High-Strength Steel Angle Columns
(ASCE, 4/1/2021)This study investigated the compressive behavior of concrete-encased high-strength steel angle columns (Fy=718 MPa). Axial compressive tests were performed on six composite columns with different angle sections and ... -
Prefabricated Composite Steel-Timber Stiffened Wall Systems with Post-Tensioning: Structural Analysis and Experimental Investigation under Vertical Axial Load
(ASCE, 2/1/2021)With increasing demand for midrise buildings, automated prefabrication, design for manufacturing and assembly (DfMA), and sustainability, a novel material-efficient post-tensioned (PT) composite steel-timber (CST) stiffened ... -
Full-Scale Shake Table Test Damage Data Collection Using Terrestrial Laser-Scanning Techniques
(ASCE, 3/1/2021)This paper presents the use of modern survey techniques, particularly light detection and ranging (LiDAR) scanning, to collect time-sensitive information before and after shake table experiments. Two full-scale, three-story ...