• Login
    View Item 
    •   DSpace Home
    • ASCE
    • Journal of Structural Engineering
    • View Item
    •   DSpace Home
    • ASCE
    • Journal of Structural Engineering
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Full-Scale Shake Table Test Damage Data Collection Using Terrestrial Laser-Scanning Techniques

    Thumbnail
    View/Open
    %28ASCE%29ST.1943-541X.0002905.pdf (4.660Mb)
    Date
    3/1/2021
    Author
    Mohammad Aghababaei
    Christian Okamoto
    Maria Koliou
    Takuya Nagae
    Chris P. Pantelides
    Keri L. Ryan
    Andre R. Barbosa
    Shiling Pei
    John W. van de Lindt
    Shideh Dashti
    Metadata
    Show full item record
    Abstract
    This paper presents the use of modern survey techniques, particularly light detection and ranging (LiDAR) scanning, to collect time-sensitive information before and after shake table experiments. Two full-scale, three-story residential buildings were tested simultaneously on the largest shake table in the world. The focus of this study is on the use of LiDAR to document observations during these tests. The challenges experienced during this study prompted the development of a formalized survey procedure using LiDAR scanning techniques, which can be used by other researchers when planning to collect such time-sensitive data from similar experimental programs. In this paper, damage assessment through visual inspection, which is commonly performed during full-scale tests, is compared to postexperiment assessments using postprocessed LiDAR-derived point clouds. Various examples of damage to structural and nonstructural components, including columns, bracing, partition walls, and façades, are illustrated through postshaking visual inspections as well as LiDAR-derived point clouds. The feasibility of making accurate measurements using LiDAR point clouds, and automatically detecting damage using the point-to-point cloud comparison, is presented. Finally, the relationship between observations through traditional instruments (e.g., accelerometers and laser meters) and LiDAR is discussed. In one example, the measurements from eight laser meters around the buildings are used to validate the measurements obtained using LiDAR point clouds. It is concluded that observations through LiDAR are complementary to those from traditional instruments, while permanent/residual displacements after the tests can be measured from both traditional and modern instruments.
    URI
    http://yetl.yabesh.ir/yetl1/handle/yetl/4270288
    Collections
    • Journal of Structural Engineering

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV