Journal of Structural Engineering: Recent submissions
Now showing items 1261-1280 of 10765
-
Seismic Testing and Analysis of Rocking Motions of Japanese Post-and-Beam Construction
(ASCE, 2/1/2021)From our investigation of the experimental seismic response of post-and-beam wooden buildings with different column joints, we developed a nonlinear three-dimensional distinct element model that is capable of time-history ... -
Methodology for Assessing the Performance of RC Structures with Breakaway Infill Walls under Tsunami Inundation
(ASCE, 2/1/2021)The increasing attention of governments and insurance companies toward the evaluation of tsunamis’ impacts on coastal communities led to a renewed interest in assessing the behavior of existing buildings under onshore ... -
Rate-Dependent Behavior of Transverse Welded Lap Joints at Elevated Temperatures
(ASCE, 2/1/2021)This paper presents key findings of an experimental program performed to examine the rate-dependent behavior of weld material in transverse welded lap joints at elevated temperatures under steady-state thermal conditions. ... -
Seismic Performance of Three-Story Cross-Laminated Timber Structures in Japan
(ASCE, 2/1/2021)To promote the development of cross-laminated timber (CLT) structures, the Japanese Government Notifications on Structural Design of CLT Buildings (GN 611) was issued in 2016. In GN 611, three types of platform-framing CLT ... -
Component-Level Seismic Performance Assessment of Instrumented Super High-Rise Buildings under Bidirectional Long-Period Ground Motions
(ASCE, 2/1/2021)A detailed seismic performance assessment for super high-rise buildings is essential for decision-making on postearthquake repair, maintenance, and reoccupation. This paper proposes a probabilistic assessment framework for ... -
Full-Range Behavior of Top-and-Seat Angle Connections
(ASCE, 1/1/2021)This paper presents recent research carried out at the University of Sydney on the full-range behavior of top-and-seat angle connections. A total of 18 tests were conducted, covering two connection configurations and three ... -
Plastic Hinge Model for Performance-Based Design of Beam-Column Joints
(ASCE, 2/1/2021)For performance-based design of reinforced concrete moment frames, the inelastic load-displacement relationship including strength degradation of beam-column joints should be accurately defined. In this study, a simplified ... -
Fundamental Behavior of Timber Concrete-Composite Floors in Fire
(ASCE, 2/1/2021)Timber-concrete composite (TCC) floors are becoming more commonly used in mass timber construction due to their increased stiffness and strength relative to nonconcrete composite timber floors. Current building codes do ... -
Impact of Column Rectangularity on Punching Shear Strength: Code Predictions versus Finite Element Analysis
(ASCE, 2/1/2021)In this paper, the punching shear behavior of interior slab-rectangular column connections without shear reinforcement under static concentric loading is studied using a three-dimensional, nonlinear, finite element model ... -
Response Prediction to Walking-Induced Vibrations of a Long-Span Timber Floor
(ASCE, 2/1/2021)Long-span timber floors are susceptible to annoying floor vibrations caused by human activities, which, in many cases, govern the timber floor design. Consequently, a reliable prediction of floor vibration responses under ... -
Shear and Torsional Design of Reinforced Concrete Members with High-Strength Reinforcement
(ASCE, 2/1/2021)Due to the similar design process for shear and torsion in RC members, the code limits on maximum yield strength for both shear and torsion are the same. However, the limiting values differ among different codes. For ... -
Influence of Types of End Connections and Detailing of End-Protected Zones on Seismic Performance of SCBFs
(ASCE, 1/1/2021)This paper presents an experimental investigation to study the influence of the type of end connections as well as the detailing of end-protected zones on the seismic performance of special concentrically braced frames ... -
Stochastic Modeling of Deterioration and Time-Variant Performance of Reinforced Concrete Structures under Joint Effects of Earthquakes, Corrosion, and ASR
(ASCE, 2/1/2021)To assess the time-variant performance of RC structures, it is important to model the various deterioration processes as well as their interactions in addition to the associated uncertainties. Besides earthquakes and ... -
Strength and Reliability of Structural Steel Roofs Subjected to Ponding Loads
(ASCE, 2/1/2021)Roof collapses due to ponding instability are among the most frequent structural failures. Although methods of design for other types of instability have evolved and improved with computational advances, the most commonly ... -
High-Fidelity Finite Element Modeling of Wood-Sheathed Cold-Formed Steel Shear Walls
(ASCE, 2/1/2021)Cold-formed steel (CFS) framed construction has been widely adopted and used toward a modern, lightweight, and cost-efficient engineering practice across the United States. The primary objective of this work is to numerically ... -
Blast Response of Single-Degree-of-Freedom Systems Including Fluid-Structure Interaction
(ASCE, 1/1/2021)The state of the practice for the blast-resistant design of structures uses a simplified single-degree-of-freedom (SDOF) analysis and estimates the blast loads assuming reflection from an unyielding rigid surface. Past ... -
Lateral-Torsional Buckling of Shear Deformable Monosymmetric Steel I-Section Arches with Elastic Rotational-End Restraints under a Central Concentrated Load
(ASCE, 2/1/2021)This paper investigates the elastic lateral-torsional buckling of shear deformable circular arches of monosymmetric steel I-section with in-plane elastic rotational end constraints under a central concentrated radial load. ... -
Behavior and Modeling of Glulam Beams with Bolted Connections Subjected to Shock Tube–Simulated Blast Loads
(ASCE, 1/1/2021)An experimental program investigating the behavior of glued laminated timber (glulam) assemblies with various bolted connections subjected to simulated blast loading was undertaken. A total of 14 full-scale tests on ... -
Damping Ratios of the First Mode for the Seismic Analysis of Buildings
(ASCE, 1/1/2021)This paper analyzed damping ratios inferred from 1,335 seismic responses recorded in 154 instrumented buildings in California. These values were inferred using a parametric system identification technique in the time domain, ... -
Damping Ratio of RC Squat Wall with Limited Damage under High-Frequency Earthquake
(ASCE, 1/1/2021)In regions experiencing high-frequency earthquakes, it is necessary to reevaluate the seismic performance of nuclear power plant buildings. In the evaluation of equipment, as well as the structure, the damping ratio of a ...