Journal of Structural Engineering: Recent submissions
Now showing items 1281-1300 of 10765
-
Flexural Behavior and Rotation Capacity of Welded I-Beams Made from 690-MPa High-Strength Steel
(ASCE, 2/1/2021)In this study, the flexural behavior and rotation capacity of welded I-beams made from 690-MPa high-strength steel were investigated through experimental tests and numerical simulations. In the experimental program, a total ... -
Steel-Plate Composite Walls with Different Types of Out-of-Plane Shear Reinforcement: Behavior, Analysis, and Design
(ASCE, 2/1/2021)Steel-plate composite (SC) walls consist of two steel faceplates connected with tie bars and then filled with concrete. The tie bars provide stability to the empty modules and serve as out-of-plane shear reinforcement after ... -
Experimental Study on Cyclic Performance of a Damage-Free Brace with Self-Centering Connection
(ASCE, 1/1/2021)This paper investigates the experimental behavior of a self-centering (SC) timber brace that employs the resilient slip friction joint (RSFJ) for energy dissipation. Due to the inherent characteristics of the RSFJ, mainly ... -
Analysis and Design of One-Way Steel-Plate Composite Walls for Far-Field Blast Effects
(ASCE, 1/1/2021)This paper presents the development of normalized total force-total impulse (P-I) diagrams for analyzing and designing steel-plate composite (SC) walls to resist far-field blast loads. The P-I diagrams depict contours of ... -
Influence of Architectural Facades on Wind Pressures and Aerodynamic Forces of Tall Buildings
(ASCE, 1/1/2021)Architectural facades including balconies, mullions, shading boards, and ribs are widely used outside of tall buildings for the purpose of aesthetics and function. And these facades will affect the wind loads of tall ... -
Dynamic Response of RC Elements Subjected to Combined Loading of Blast and Fragments
(ASCE, 2/1/2021)Combined loading of blast and fragments involves various loading mechanisms on a structural element. It includes the momentum inflicted by the blast load and the penetration of the fragments, as well as the structural ... -
Seismic Retrofit Assessment of a School Building through Operational Modal Analysis and f.e. Modeling
(ASCE, 1/1/2021)The paper deals with the dynamic characterization of a reinforced concrete (RC) frame school building in central Italy before and after the seismic retrofitting, obtained by coupling the building with an innovative patented ... -
Laterally Offset RHS X-Connections
(ASCE, 1/1/2021)The design of welded rectangular hollow section (RHS) truss-type connections, in which branches are laterally offset from the chord centerline, is not included in any of the current design codes and standards. To provide ... -
Effect of Bolt-Hole Clearance on the Ultimate Strength of Eccentrically Loaded Bolt Groups
(ASCE, 1/1/2021)The instantaneous center of rotation method is presented in the AISC Steel Construction Manual for the design of eccentrically loaded bolted connections. Tabulated values for normalized strengths of bolt groups are provided, ... -
Repair Method and Finite Element Analysis for Corroded Gusset Plate Connections Bonded to CFRP Sheets
(ASCE, 1/1/2021)In steel truss bridges, severe damage due to corrosion at gusset plate connections has been widely reported. This study investigated the effectiveness of a repair method using carbon-fiber-reinforced plastic (CFRP) sheets ... -
Material Testing–Integrated Simulation of a Rehabilitated Concrete Structure Subjected to Preexisting Damage and Temperature Variation
(ASCE, 1/1/2021)This paper investigates a new simulation framework for analyzing structural systems with unconventional complex materials under extreme loading conditions. The new experimental-numerical simulation method, named material ... -
Influence of Cross-Section Type and Boundary Conditions on Structural Behavior of Concrete-Filled Steel Tubular Columns Subjected to Fire
(ASCE, 1/1/2021)Composite columns consisting of steel hollow sections filled with concrete offer numerous advantages including high fire resistance. However, there are limited provisions for fire design of these columns, and current ... -
Intensity Measures for Regional Seismic Risk Assessment of Low-Rise Wood-Frame Residential Construction
(ASCE, 1/1/2021)Ground motion intensity measures (IMs) provide a link between the probabilistic seismic hazard analysis and probabilistic structural response analysis. IMs that are well correlated with the structural response allow an ... -
Reference-Free Dynamic Distributed Monitoring of Damage in Multispan Bridges
(ASCE, 1/1/2021)The work presented pertains to the development and application of a damage detection method in bridges by use of distributed fiber-optic sensors. It utilizes the dynamic mode of the Brillouin optical time-domain analysis ... -
Minimum Shear Reinforcement for Columns with High-Strength Reinforcement and Concrete
(ASCE, 2/1/2021)Large-scale reinforced concrete columns with high-strength reinforcement and concrete were tested. The nominal compressive strength of concrete was 70 MPa. The nominal yield strengths of longitudinal and shear ... -
Data-Driven Approach to Predict the Plastic Hinge Length of Reinforced Concrete Columns and Its Application
(ASCE, 2/1/2021)Inelastic response of reinforced concrete columns to combined axial and flexural loading is characterized by plastic deformations localized in small regions, which are idealized as plastic hinges. Under extreme events such ... -
Effective Modeling of Special Steel Moment Frames for the Evaluation of Seismically Induced Floor Accelerations
(ASCE, 1/1/2021)Nonlinear time-history analysis is becoming a standard procedure for evaluating the seismic performance of structures. The current ASCE 7-16 allows practitioners to perform it when the acceleration demands of nonstructural ... -
Lateral Performance of Self-Centering Steel–Timber Hybrid Shear Walls with Slip-Friction Dampers: Experimental Investigation and Numerical Simulation
(ASCE, 1/1/2021)An innovative self-centering steel–timber hybrid shear wall (SC-STHSW) system is proposed in this paper. The SC-STHSW system is composed of two subsystems: the posttensioned (PT) steel frame, and the infill light-frame ... -
Experimental and Numerical Investigations of Octagonal High-Strength Steel Tubular Stub Columns under Combined Compression and Bending
(ASCE, 1/1/2021)An experimental and numerical study on the octagonal high-strength steel tubular stub columns under combined compression and bending is presented in this paper. Octagonal high-strength steel tubular stub column specimens ... -
Top-Story Softening for Enhanced Mitigation of Vortex Shedding-Induced Vibrations in Wind-Excited Tuned Mass Damper Inerter-Equipped Tall Buildings
(ASCE, 1/1/2021)An innovative structural modification, top-story softening, is herein proposed in conjunction with an optimally tuned top-floor tuned mass damper inerter (TMDI) for improved serviceability performance in typical core-frame ...