Journal of Composites for Construction: Recent submissions
Now showing items 1361-1380 of 2137
-
Predicting the Response of FRP-Strengthened Reinforced-Concrete Flexural Members with Nonlinear Evolutive Analysis Models
(American Society of Civil Engineers, 2011)To design efficient and economical strengthening solutions, the structural performance before and after the intervention must be accurately evaluated. In the case of statically indeterminate structures or when the structure ... -
Flexural Strengthening of RC Beams with Cement-Based Composites
(American Society of Civil Engineers, 2011)In this paper, the effectiveness of fiber-reinforced cementitious matrix (FRCM) materials for the strengthening of reinforced concrete (RC) beams is experimentally investigated. Bending tests on RC beams strengthened with ... -
Evaluation of Flexural Behavior and Serviceability Performance of Concrete Beams Reinforced with FRP Bars
(American Society of Civil Engineers, 2011)Flexural behavior and serviceability performance of 24 full-scale concrete beams reinforced with carbon-, glass-, and aramid-fiber-reinforced-polymer (FRP) bars are investigated. The beams were 3,300 mm long with a rectangular ... -
Effect of Transverse Reinforcement on the Flexural Behavior of Continuous Concrete Beams Reinforced with FRP
(American Society of Civil Engineers, 2011)Continuous concrete beams are structural elements commonly used in structures that might be exposed to extreme weather conditions and the application of deicing salts, such as bridge overpasses and parking garages. In such ... -
Shear Strengthening of RC Beams with Externally Bonded FRP Composites: Effect of Strip-Width-to-Strip-Spacing Ratio
(American Society of Civil Engineers, 2011)The results of an experimental and analytical investigation of shear strengthening of reinforced concrete (RC) beams with externally bonded (EB) fiber-reinforced polymer (FRP) strips and sheets are presented, with emphasis ... -
FRP-Confined Circular Concrete-Filled Thin Steel Tubes under Axial Compression
(American Society of Civil Engineers, 2011)Concrete-filled steel tubes are widely used as columns in many structural systems, and a common failure mode of such tubular columns is inelastic outward local buckling near a column end. The use of fiber reinforced polymer ... -
Performance of Glued-Laminated Timbers with FRP Shear and Flexural Reinforcement
(American Society of Civil Engineers, 2011)Glued-laminated wood beams (glulams) have low allowable shear stresses relative to competitive engineering wood products such as parallel strand lumber and laminated veneer lumber. For heavily loaded applications such as ... -
Flexural Performance of Carbon Fiber-Reinforced Polymer Prestressed Concrete Side-by-Side Box Beam Bridge
(American Society of Civil Engineers, 2011)The effect of varying transverse posttensioning levels and arrangements on the load response of a one-half scale 30° skewed seven box beam bridge model was investigated. The effective span of the bridge model was 9.45 m ... -
Conceptual Model for Prediction of FRP-Concrete Bond Strength under Moisture Cycles
(American Society of Civil Engineers, 2011)Fiber-reinforced polymer (FRP) retrofit systems for concrete structural members such as beams, columns, slabs, and bridge decks have become increasingly popular as a result of extensive studies on short-term debonding ... -
Carbon Fiber Shear Retrofit of Forty-Two-Year-Old AASHTO I-Shaped Girders
(American Society of Civil Engineers, 2011)Sixteen shear capacity tests were performed on eight decommissioned AASHTO prestressed concrete girders that had been in service for over 42 years. These bridge members presented a unique opportunity to investigate carbon ... -
Fiber-Reinforced-Cementitious-Composites Plate for Anchoring FRP Sheet on Concrete Member
(American Society of Civil Engineers, 2011)To improve the fiber-reinforced polymer (FRP)/concrete bond capacity, this paper presents a new anchoring approach with the gluing of precast fiber-reinforced cementitious composites (FRCC) plate on top of the FRP sheets. ... -
Contribution to Shear Wrinkling of GFRP Webs in Cell-Core Sandwiches
(American Society of Civil Engineers, 2011)Glass-fiber-reinforced polymer (GFRP) cell-core sandwiches are composed of outer GFRP face sheets, a foam core, and a grid of GFRP webs integrated into the core to reinforce the shear load capacity. One of the critical ... -
Diagonal Compression Testing of FRP-Retrofitted Unreinforced Clay Brick Masonry Wallettes
(American Society of Civil Engineers, 2011)To address concerns regarding the seismic vulnerability of New Zealand unreinforced masonry (URM) buildings, a research program was undertaken to investigate the effectiveness of fiber-reinforced polymer (FRP) systems as ... -
Nonlinear Behavior of a Masonry Subassemblage Before and After Strengthening with Inorganic Matrix-Grid Composites
(American Society of Civil Engineers, 2011)Past experimental tests on a full-scale masonry wall with an opening evidenced the key role of the spandrel panel in the in-plane nonlinear response of the system. Recent seismic codes do not provide specific criteria to ... -
Testing and Modeling of a New Moment Connection of Concrete-Filled FRP Tubes to Footings under Monotonic and Cyclic Loadings
(American Society of Civil Engineers, 2011)This study explores a new moment connection of concrete-filled fiber-reinforced polymer (FRP) tube (CFFT) to concrete footing. The tube is tightly fitted and adhesively bonded to a short reinforced concrete stub protruding ... -
Bond Efficiency of EBR and NSM FRP Systems for Strengthening Concrete Members
(American Society of Civil Engineers, 2011)This paper reports the results of an experimental program to investigate the bonding behavior of two different types of fiber-reinforced polymer (FRP) systems for strengthening RC members: externally bonded carbon (EBR) ... -
Seismic Behavior of Concrete Columns Reinforced by Steel-FRP Composite Bars
(American Society of Civil Engineers, 2011)Steel-fiber-reinforced polymer (FRP) composite bars (SFCBs) are a novel reinforcement for concrete structures. Because of the FRP’s linear elastic characteristic and high ultimate strength, they can achieve a stable postyield ... -
Residual Strength of Impact-Damaged CFRP Used to Strengthen Concrete Structures
(American Society of Civil Engineers, 2011)Although previous research has demonstrated the improvement in performance of reinforced concrete structures enhanced with externally applied carbon fiber reinforced polymers (CFRP), the effect of transverse impact damage ... -
Analytical Model for CFRP-Strengthened Prestressed Concrete Girders Subject to Cyclic Loading
(American Society of Civil Engineers, 2011)An analytical model is presented to simulate the behavior of prestressed concrete girders strengthened with various carbon fiber-reinforced polymer systems and subjected to static and cyclic loading. The initial concrete ... -
Combined Shear and Flexural Behavior of Hybrid FRP-Concrete Beams Previously Subjected to Cyclic Loading
(American Society of Civil Engineers, 2011)Concrete-filled fiber-reinforced polymer (FRP) tubes (CFFTs) were initially proposed for bridge substructures in corrosive environments in the early 1990s. Systematic studies have since demonstrated the feasibility and ...