Journal of Composites for Construction: Recent submissions
Now showing items 1341-1360 of 2137
-
Influence of Slenderness on the Behavior of a FRP-Encased Steel-Concrete Composite Column
(American Society of Civil Engineers, 2012)The compressive behavior of a steel-concrete composite column encased in a fiber reinforced polymer (FRP) tube is evaluated experimentally for columns with various slenderness ratios. The composite column consists of a FRP ... -
Behavior and Modeling of Concrete Confined with FRP Composites of Large Deformability
(American Society of Civil Engineers, 2011)This paper presents the results of an experimental study on the behavior of concrete confined by fiber reinforced polymer (FRP) jackets with a large rupture strain (LRS). The FRP composites considered herein are formed by ... -
Case Study on the Restoration of Flexural Capacity of Continuous One-Way RC Slabs with Cutouts
(American Society of Civil Engineers, 2011)Introducing openings in existing reinforced concrete (RC) slabs can severely weaken the slabs because of the cut out of the concrete and reinforcing steel. This paper reports field tests on the use of carbon fiber-reinforced ... -
Interfacial Bond Strength Characteristics of FRP and RC Substrate
(American Society of Civil Engineers, 2012)This study focuses on the development of a fracture-mechanics-based model that predicts the debonding behavior of RC beams strengthened with fiber-reinforced polymer (FRP). In this study, the existing debonding models based ... -
New Bridge Deck Cast onto Corrugated GFRP Stay-in-Place Structural Forms with Interlocking Connections
(American Society of Civil Engineers, 2012)In this study, pultruded glass fiber reinforced polymer (GFRP) corrugated plates, connected together through pin-and-eye connections, were investigated as stay-in-place (SIP) forms for concrete decks. The SIP form completely ... -
Dynamic Response of a Sheet Pile of Fiber-Reinforced Polymer for Waterfront Barriers
(American Society of Civil Engineers, 2011)This paper presents the results from a combined experimental and advanced computational study to understand the dynamic response of a pultruded fiber-reinforced polymer (FRP) sheet pile of 9 m length that is installed into ... -
Cyclic Behavior of Hybrid Columns Made of Ultra High Performance Concrete and Fiber Reinforced Polymers
(American Society of Civil Engineers, 2012)The unique features of ultra-high-performance concrete (UHPC) in damage tolerance, energy absorption, and deformability were combined with the superior performance of concrete-filled fiber-reinforced polymer (FRP) tubes ... -
Experimental and Numerical Study for the Shear Strengthening of Reinforced Concrete Beams Using Textile-Reinforced Mortar
(American Society of Civil Engineers, 2012)In this paper, the effectiveness of textile-reinforced mortars (TRMs), as a means of increasing the shear resistance of reinforced concrete beams, is experimentally and numerically investigated. Textiles comprise of fabric ... -
Interfacial Stresses in RC Beams Strengthened by Externally Bonded FRP/Steel Plates with Effects of Shear Deformations
(American Society of Civil Engineers, 2012)This paper introduces an analytical method to calculate the interfacial shear and normal stresses in reinforced concrete (RC) beams strengthened by a fiber reinforced polymer (FRP) sheet or a steel plate (i.e., a soffit ... -
Behavior of Concrete Beams with Short Shear Span and Web Opening Strengthened in Shear with CFRP Composites
(American Society of Civil Engineers, 2012)This paper presents test results of 16 reinforced concrete (RC) beams with web openings strengthened in shear with externally bonded carbon fiber reinforced polymer (CFRP) composite sheets. Test specimen was 2,600 mm long ... -
CFRP Repair of Steel Beams with Various Initial Crack Configurations
(American Society of Civil Engineers, 2011)This paper presents an experimental program to study the behavior of notched steel beams repaired with carbon-fiber-reinforced polymer (CFRP) sheets. Particular attention is paid to examining the interaction between the ... -
Investigation of RC Beams Strengthened with Prestressed NSM CFRP Laminates
(American Society of Civil Engineers, 2011)In this research, concrete beams were strengthened with carbon-fiber-reinforced polymer (CFRP) laminate strips that were placed in precut grooves on the concrete surface. Five simple-span RC beams were tested. Among these ... -
Three-Dimensional Nonlinear Finite-Element Analysis of Prestressed Concrete Beams Strengthened in Shear with FRP Composites
(American Society of Civil Engineers, 2011)Nonlinear finite-element (FE) analysis was carried out to investigate the structural response of prestressed concrete (PC) beams strengthened with fiber reinforced polymer (FRP) composites in shear. Development of the FE ... -
Effects of Ratio of CFRP Plate Length to Shear Span and End Anchorage on Flexural Behavior of SCC RC Beams
(American Society of Civil Engineers, 2011)The aim of this experimental investigation is to study the effect of the ratio of carbon fiber-reinforced polymer (CFRP) precured laminate length to shear span and different end plate anchorage systems on the flexural ... -
Prediction of Load-Slip Behavior of FRP Retrofitted Masonry
(American Society of Civil Engineers, 2011)The out-of-plane bending resistance of a fiber-reinforced polymer (FRP)-strengthened masonry wall is generally governed by debonding failure mechanisms. The behavior at the FRP-to-masonry interface is a key factor affecting ... -
Mechanics of Bond Fatigue Behavior of Concrete Beams Strengthened with NSM CFRP Rods
(American Society of Civil Engineers, 2011)Bond tests were conducted on 28 concrete beams strengthened with near-surface mounted (NSM) carbon-fiber-reinforced polymer (CFRP) rods under different fatigue load levels. In the NSM technique, the CFRP rods are placed ... -
Textile-Reinforced Mortar versus FRP as Strengthening Material for Seismically Deficient RC Beam-Column Joints
(American Society of Civil Engineers, 2011)In this paper, efficiency and effectiveness of textile-reinforced mortars (TRM) on upgrading the shear strength and ductility of a seismically deficient exterior beam-column joint has been studied. The results are then ... -
Seismic Behavior of Beam-Column Joints Reinforced with GFRP Bars and Stirrups
(American Society of Civil Engineers, 2011)Reinforced concrete beam-column joints are commonly used in structures such as parking garages and road overpasses, which might be exposed to extreme weathering conditions and the application of deicing salts. The use of ... -
Behavior of Honeycomb FRP Sandwich Structure under Combined Effects of Service Load and Low Temperatures
(American Society of Civil Engineers, 2011)This paper presents the experimental study about the behavior of honeycomb fiber-reinforced polymer (HFRP) sandwich structure with corrugated cores under the combined effects of service load and low-temperature cycling ... -
Seismic Repair and Strengthening of Lap Splices in RC Columns: Carbon Fiber–Reinforced Polymer versus Steel Confinement
(American Society of Civil Engineers, 2011)A design approach, developed specifically for seismic bond strengthening of the critical splice region of reinforced concrete columns or bridge piers, is presented and discussed. The approach is based on providing adequate ...