Journal of Composites for Construction: Recent submissions
Now showing items 1321-1340 of 2137
-
Attempt for Seismic Retrofit of Existing Substandard RC Members under Reversed Cyclic Flexural Effects
(American Society of Civil Engineers, 2012)Many existing reinforced concrete (RC) substandard structures in seismically active regions, designed and/or constructed improperly or constructed before up-to-date seismic design codes, are in urgent need of seismic ... -
Effect of Hot-Wet Aging on the Pin-Bearing Strength of a Pultruded Material with Polyester Matrix
(American Society of Civil Engineers, 2012)This paper presents test results to show the effect of hot-wet conditioning on the pin-bearing strength of a pultruded fiber-reinforced polymer material. Knowledge of this strength property, taking account of any reduction ... -
Upgrading the Seismic Performance of Reinforced Masonry Columns Using CFRP Wraps
(American Society of Civil Engineers, 2012)Compared with reinforced concrete, relatively fewer experimental studies address the behavior of masonry columns under combined axial load and cyclic flexure. There exist reinforced concrete masonry (RCM) columns that are ... -
Reviewers
(American Society of Civil Engineers, 2011) -
Oxygen Permeability of FRP-Concrete Repair Systems
(American Society of Civil Engineers, 2012)Fiber reinforced polymers (FRP) are increasingly used for repairing corrosion-damaged concrete structures. The performance of the repairs is critically dependent on the oxygen permeability of the FRP-concrete system. This ... -
Effect of Warm Temperatures on Externally Bonded FRP Strengthening
(American Society of Civil Engineers, 2012)Fiber-reinforced polymer (FRP) plate strengthening relies critically upon the adhesive that is used to bond it to the existing structure. A typical two-part ambient-cure epoxy adhesive for structural strengthening has a ... -
Seismic Response and CFRP Retrofit of Poorly Detailed Shear Walls
(American Society of Civil Engineers, 2012)The reversed cyclic loading behavior of full-scale shear wall specimens was investigated before and after retrofit. The wall specimens were designed and detailed to simulate nonductile reinforced concrete construction of ... -
Flexural Stiffness and Strength of GFRP-Reinforced Timber Beams
(American Society of Civil Engineers, 2012)An experimental program was conducted at the University of Manitoba to test salvaged timber stringers strengthened with glass fiber-reinforced polymer (GFRP) laminates. A total of 20 creosote-treated Douglas Fir beams with ... -
Assessment and Design Procedure for the Seismic Retrofit of Reinforced Concrete Beam-Column Joints using FRP Composite Materials
(American Society of Civil Engineers, 2012)In this study, an analytical procedure for the evaluation of the expected performance of existing reinforced concrete (RC) beam-column joints before and after being retrofitted using fiber-reinforced polymer (FRP) composite ... -
One-Way Shear Behavior of Lightweight Concrete Panels Reinforced with GFRP Bars
(American Society of Civil Engineers, 2012)Corrosion of steel bars used in reinforced concrete bridge decks exposed to moisture and deicing salts is of concern. The chloride-induced corrosion of steel reinforcement increases the maintenance cost of the structure. ... -
Discussion of “Flexural Response of Concrete Beams Prestressed with AFRP Tendons: Numerical Investigation” by Yail J. Kim
(American Society of Civil Engineers, 2012) -
Experimental Study on the Fatigue Behavior of Steel Beams Strengthened with Different Fiber-Reinforced Composite Plates
(American Society of Civil Engineers, 2012)An experimental study was conducted to investigate the fatigue behavior of artificially notched steel beams strengthened with four different types of materials tested under equivalent tensile stiffness. These materials ... -
Residual Behavior of Shear-Repaired Concrete Beams Using CFRP Sheets Subjected to Elevated High Temperatures
(American Society of Civil Engineers, 2012)This paper presents the residual behavior of unreinforced concrete beams repaired with carbon fiber-reinforced polymer (CFRP) sheets in shear subjected to elevated temperatures up to 200°C. An experimental program is ... -
Effect of Member Depth on Shear Strength of High-Strength Fiber-Reinforced Polymer–Reinforced Concrete Beams
(American Society of Civil Engineers, 2012)This paper examines the effect of depth on the shear strength and behavior of high-strength concrete beams reinforced with glass-fiber-reinforced polymer (GFRP) and carbon-fiber-reinforced polymer (CFRP) bars in the ... -
CFRP-Confined Square RC Columns. II: Cyclic Axial Compression Stress-Strain Model
(American Society of Civil Engineers, 2012)For the seismic design of fiber reinforcement polymer (FRP) confined reinforced concrete (RC) columns, the development of an accurate axial stress-strain model that considers cyclic compression is necessary. In light of ... -
CFRP-Confined Square RC Columns. I: Experimental Investigation
(American Society of Civil Engineers, 2012)The majority of experimental studies investigating the stress-strain behavior of square concrete columns confined with carbon fiber-reinforced polymer (CFRP) composites have focused largely on unreinforced columns of small ... -
Fatigue Enhancement of Welded Details in Steel Bridges Using CFRP Overlay Elements
(American Society of Civil Engineers, 2012)Carbon-fiber reinforced polymer (CFRP)-overlay elements were developed with the purpose of enhancing the fatigue performance of welded connections in steel bridge girders. Fatigue tests of seven specimens, including four ... -
Discussion of “Flexural Response of Concrete Beams Prestressed with AFRP Tendons: Numerical Investigation” by Yail J. Kim
(American Society of Civil Engineers, 2012) -
Intermediate Debonding Failure of RC Beams Retrofitted in Flexure with FRP: Experimental Results versus Prediction of Codes of Practice
(American Society of Civil Engineers, 2012)An experimental investigation has been conducted with the aim to investigate on the midspan debonding failure of reinforced concrete (RC) beams retrofitted in flexure by means of the application of a fiber-reinforced polymer ... -
Durability of Concrete Beams Externally Reinforced with CFRP Composites Exposed to Various Environments
(American Society of Civil Engineers, 2012)In this paper, the effects of various environmental exposure conditions on concrete beams externally reinforced with carbon-fiber-reinforced polymer (CFRP) composites were studied. To evaluate the overall environmental ...