ASCE: Recent submissions
Now showing items 4021-4040 of 107386
-
Effect of the Viscosity of Alkali Activators on the Particle Packing of Geopolymer Mortar
(American Society of Civil Engineers, 2025)The packing behavior of a particle system is significantly influenced by the particle size distribution (PSD) of the mix and the viscosity of the liquid. In this study, the effect of the viscosity of the commonly used ... -
Analyses of Thermoactive Piles Considering Surface Radiation and Wind Convection Effects
(American Society of Civil Engineers, 2025)Energy piles present a promising avenue for harnessing shallow geothermal energy, attracting significant attention in recent years, resulting in a surge of studies including field and model tests and numerical analyses. ... -
Composite Design of a Phosphogypsum Whisker–Based Rejuvenator Based on the RSM and Evaluation of the Rejuvenating Effect
(American Society of Civil Engineers, 2025)This research aimed to develop a superior asphalt rejuvenator characterized by its resistance to aging by utilizing phosphogypsum whiskers (PSWs) derived from phosphogypsum (PSP) waste. Initially, the ratios of components ... -
Embedment Properties of Self-Tapping Screws Loaded at Different Angles to the Grain
(American Society of Civil Engineers, 2025)The embedment properties including embedment strength and foundation modulus govern the load-carrying capacity and stiffness of timber joints with dowel-type fasteners. As the common fasteners, self-tapping screws (STSs) ... -
Synergistic Reinforcement of Foamed Cementitious Materials Using CO2 Foaming Agent
(American Society of Civil Engineers, 2025)Foamed concrete has been considered a low-strength cementitious material due to its flaky and porous structure. The CO2 foaming agents are thought to enhance the mechanical properties of foamed concrete, but the exact ... -
Effect of the Degree of Blending on the Performance of Epoxy Component–Modified Recycled Asphalt and Epoxy Component–Modified Recycled Asphalt Mixture
(American Society of Civil Engineers, 2025)The blending behavior of thermosetting epoxy asphalt in recycled mixtures is significantly different from that of thermoplastic asphalt. Investigations into the degree of blending (DOB) between epoxy asphalt and aged asphalt ... -
Effects of Fiber Shape and Nanopalygorskite on the Long-Term Performance of Steel Fiber–Reinforced Ultrahigh-Performance Concrete
(American Society of Civil Engineers, 2025)Steel fibers and nanopalygorskite (NP) were introduced into ultrahigh-performance concrete (UHPC) to improve its long-term performance. Long-term mechanical properties and long-term shrinkage performance were measured to ... -
Mitigation of the Swelling Behavior of Expansive Soils Using Hydrophobic Lignosulfonate: Adsorption Mechanism
(American Society of Civil Engineers, 2025)Expansive soils exhibit shrink–swell characteristics due to the presence of clay mineral constituent. Often such soils are stabilized using chemical stabilizers. This study examined the potential application of calcium-based ... -
Viscoelastoplastic Constitutive Model for the AC Lower Surface Layer Considering Time-Varying Characteristics during the Intelligent Compaction Process
(American Society of Civil Engineers, 2025)Intelligent compaction (IC) technology based on the continuous compaction control (CCC) technology enables real-time monitoring, evaluation, and feedback of compaction quality. However, the lack of a viscoelastoplastic ... -
Environmentally Friendly End-Capped Polyurethane for Enhancing Asphalt–Granite Adhesion
(American Society of Civil Engineers, 2025)The poor adhesion of asphalt–granite limits the application of granite. This research aims to enhance the adhesion of asphalt and granite by establishing chemical connections between the hydroxyl groups on granite surface ... -
Impact of Salt Crystallization on the Mechanical Properties of Masonry
(American Society of Civil Engineers, 2025)Masonry structures in coastal areas are subjected to the coupled effect of load and chloride-salt crystallization, resulting in severe degradation of mechanical properties. To investigate the damage characteristics and ... -
A Sustainable Soil Stabilization Technique Using Medical Waste Incineration Ash, Coal-Based Fly Ash, and Polyethylene Terephthalate Strips
(American Society of Civil Engineers, 2025)Sustainable soil stabilization refers to using environmentally friendly and long-lasting techniques to improve the strength and durability of the problematic soil, e.g., expansive soil. Using non-energy-intensive ... -
Influence of Water Content on Shear Strength and Tangential Adhesion Strength of Sand by a Modified Vane Shear Test Device
(American Society of Civil Engineers, 2025)The shear strength of sand is important to the design and modeling of shield tunneling, and the tangential adhesion strength is a key parameter when determining the pressure gradient along the screw conveyor, the clogging ... -
Performance of a 3DOM TiO2 Fog Seal Layer in Degrading NOx from Vehicle Exhaust
(American Society of Civil Engineers, 2025)Nano-TiO2 combined with fogging technology can degrade automobile exhaust near road surfaces. Preparing nano-TiO2 in the form of three-dimensional ordered macroporous titanium dioxide (3DOM TiO2) can reduce the agglomeration ... -
Predictions for the Multiscale Elastic Performance of Solid Waste Aggregate Concrete
(American Society of Civil Engineers, 2025)To investigate the elastic properties of bulk solid waste aggregates and their impact on the elastic performance of mixed concrete, mechanical tests were conducted on 32 types of natural and solid waste aggregates, along ... -
Unveiling the Potential of Pretreated Recycled Aggregates and Alkali-Activated Binders in the Development of Pavement-Quality Concrete
(American Society of Civil Engineers, 2025)As the construction industry faces growing environmental concerns and a need for viable practices, this study explores the potential for substituting natural aggregates (NA) with untreated coarse recycled aggregates (CRAs) ... -
Study of the Dispersion, Working, and Mechanical Properties of Carbon Nanotubes in Ultrahigh-Performance Concrete
(American Society of Civil Engineers, 2025)The dispersibility of carbon nanotubes (CNTs) in ultrahigh-performance concrete (UHPC) under different preparation processes was investigated. The dispersion stability, dispersion degree of CNT aggregates, and absorbance ... -
Correlating the Fatigue Response of Asphalt Binders and Mixtures Prepared Using Warm-Mix Asphalt Technologies
(American Society of Civil Engineers, 2025)This study assessed the influence of warm-mix asphalt (WMA) technologies on the fatigue behavior of asphalt binders and mixtures. The aim was to investigate the potential correlations between the fatigue test parameter ... -
Self-Healing Properties of Graphene Oxide–Modified Asphalt Based on Molecular Dynamics
(American Society of Civil Engineers, 2025)To elucidate the influence mechanism of graphene oxide (GO) on the self-healing properties of modified asphalt, molecular dynamics simulations were employed to investigate the self-healing characteristics of matrix asphalt ... -
Performance of Cement Mortar with Inorganic Na2SO4·10H2O-Na2HPO4·12H2O Shape-Stabilization Phase Change Materials
(American Society of Civil Engineers, 2025)Phase change material (PCM) is a strategic choice for storing energy and regulating the building temperature. It has been successfully integrated into cement-based materials, significantly affecting mechanical properties. ...