ASCE: Recent submissions
Now showing items 4041-4060 of 107386
-
Mineral Evaluation and Undrained Cyclic Shear Response of MICP-Treated Sand in the Presence of Magnesium and Sulfate
(American Society of Civil Engineers, 2025)Microbially induced carbonate precipitation (MICP) has attracted considerable interest as an innovative technology that improves soil’s stiffness and strength via CaCO3 precipitation induced by microbial metabolic activity. ... -
Mechanical Performance of Hot-Mix Asphalt Modified with Porous Nanosilica Aerogels
(American Society of Civil Engineers, 2025)Asphalt pavements are under extreme strain from high-volume traffic with ultraheavy axle loads, leading to rutting, fatigue, and moisture damage that reduces the useful life of asphalt mixtures. Studies have suggested that ... -
Rheological Properties of Activated Rubber Asphalt after Short-Term Aging
(American Society of Civil Engineers, 2025)This paper researched the rheological properties of activated rubber powder–modified asphalt after aging. However, current aging methods only consider the aging of asphalt binder itself, ignoring the effect of asphalt ... -
Failure Mechanisms of Boreholes in Soft Coal Seams: Comparative Analysis of Protective Sieve Pipes
(American Society of Civil Engineers, 2025)A key strategy for mitigating gas-related disasters involves the effective drainage of gas through in-seam short boreholes. Maintaining the integrity of these boreholes in soft coal seams, prone to deformation, collapse, ... -
Factors Affecting the Release Behavior and Sustained Repair Effect of Self-Healing Microcapsules Encapsulating Rejuvenators in Asphalt Mastic
(American Society of Civil Engineers, 2025)Microcapsule technology is a promising approach for enhancing the self-healing ability of asphalt pavements. In this study, the self-healing behavior of melamine-urea-formaldehyde (MUF) microcapsules was investigated. The ... -
Effects of Magnesium and Chloride Ions on the Early-Age Hydration of C3A in the Presence of Gypsum
(American Society of Civil Engineers, 2025)The chloride binding by tricalcium aluminate (C3A) is a chemical interaction between the hydration products and chloride ions, which has been proven to effectively reduce the deterioration risk of reinforced concrete ... -
Nanocomposite-Modified Jute Geotextile as a Sustainable Solution for Subgrade Strength in Low-Traffic Roadways: A Performance Analysis
(American Society of Civil Engineers, 2025)The adoption of jute-geotextile (JGT) has emerged as an environmentally sound and cost-effective strategy for enhancing the strength of weak soil subgrades in low-volume rural roads. Applying a nontoxic nanocomposite polymer ... -
Strength, Durability, Corrosion Resistance, and Microstructure of Cemented Soil Incorporating Nano-MgO under Static and Cyclic Loading: A Laboratory Study
(American Society of Civil Engineers, 2025)Coastal regions often face challenges with the degradation of cementitious foundations that have endured prolonged exposure to corrosive ions and cyclic loading induced by environmental factors, such as typhoons, vehicular ... -
Effect of Graphene Nanosheets on the Abrasion Resistance of Concrete after Different Carbonation Times
(American Society of Civil Engineers, 2025)Concrete in hydraulic structures is not only abraded by water flow but also corroded by carbonation. It is designed to investigate the enhancement effect and mechanism of graphene nanosheets on the abrasion resistance for ... -
Effect of UiO-66 and UiO-66-NH2 Synthesized Using In Situ Self-Assembly on the Mechanical Properties of Cement-Based Materials
(American Society of Civil Engineers, 2025)To meet the demands of the construction industry for cement-based materials, nanomaterials are frequently used as additives to enhance the mechanical properties and durability of cement-based materials. This study investigates ... -
Sealing Mechanism of Foamable Polymer for Rehabilitation of Underground Structures
(American Society of Civil Engineers, 2025)Polymers play a crucial role in modern construction, particularly in the context of underground engineering structures. Foamable polymer (FP) is commonly used for grouting to remediate civil engineering construction. The ... -
A Combined Damage and Mesomechanics Model for Recycled Aggregate Concrete Reinforced with Steel–Polypropylene Fibers
(American Society of Civil Engineers, 2025)Due to microdefects within recycled aggregates, recycled aggregate concrete (RAC) has poor mechanical properties. Researchers have found that RAC’s mechanical qualities can be enhanced by the addition of single steel or ... -
Enhancing the Resistance to Elevated Temperature of Alkali-Activated Slag Concrete: A Comparative Study of the Role of Polypropylene Fibers
(American Society of Civil Engineers, 2025)Alkali-activated concrete (AAC) gained considerable attention from the beginning of its discovery as a substitute for conventional concrete (CC) due to its superior properties and powerful environmental impact. This paper ... -
Molecular Dynamics Simulation and Experimental Study of Effective Ingredient Release Characteristics of Anti-Icing Modified Asphalt Mortar
(American Society of Civil Engineers, 2025)Anti-icing asphalt pavement is widely used as an active snow melting technology for the purpose of weakening the effect of snow and ice hazards on road. However, most researches on anti-icing asphalt pavement focus on road ... -
Simplified Calculation Method of Wall–Brace Coordinated Deformation in the Excavation Process of a Foundation Pit under Multifactor Coupling
(American Society of Civil Engineers, 2025)This paper proposes a coordinated deformation calculation method for foundation pit engineering to improve deformation control between underground diaphragm walls and supports. The study validates the practicality of the ... -
Effects of Epoxy Resin System and Ingredient Content on the Properties of Asphalt and Its Mixtures
(American Society of Civil Engineers, 2025)To clarify the effect of an epoxy resin (EP) system and ingredient content on the properties of epoxy asphalt (EA) and its mixtures (EAM), which is instructive for the selection of epoxy products and the promotion of its ... -
Performance Improvement of Cement-Based Materials Containing Coal Gasification Fine Ash by Using High-Calcium Solid Waste: Experimental, Hydration Kinetics, and Thermodynamic Modeling Investigation
(American Society of Civil Engineers, 2025)The addition of an appropriate content of calcium source into cement-based materials containing coal gasification fine ash (CGFA) is found to be a potential method to improve its mechanical properties. In this study, three ... -
Utilizing Ground Granulated Blast Furnace Slag during Carbon Sequestration in Concrete
(American Society of Civil Engineers, 2025)Carbon-sequestered concrete (CSC) and green binders such as ground granulated blast furnace slag (GGBFS) have emerged as promising solutions for reducing the environmental impact of concrete. With the aim of optimizing its ... -
Investigation of the Impact of Zeolite on the Detrimental Effect of Changes in the Water Acidity Level on the Intermediate Properties of HMA Using Rheological, Mechanical, and Thermodynamical Tests
(American Society of Civil Engineers, 2025)Moisture is an essential factor that can alter an asphalt mixture’s performance against fatigue cracking of hot-mix asphalt (HMA). Accordingly, this study investigated the impact of runoffs with various degrees of acidity ... -
Resistance of High-Performance Concrete Panels with Dispersed Fiber Reinforcement to Oblique-Angle Projectile Impact
(American Society of Civil Engineers, 2025)This work aims to investigate the effect of a wide range of oblique impacts of the 7.62-mm-caliber projectile on the slim high-performance fiber-reinforced concrete (HPFRC) panels. The trajectory of the projectile, the ...