ASCE: Recent submissions
Now showing items 4001-4020 of 107386
-
NMR Measurements of Fractured Sandstone Sealed with Microbially Induced Calcium Carbonate Precipitation: Hydraulic Properties and Cementation Distribution
(American Society of Civil Engineers, 2025)Microbially induced calcite precipitation (MICP) is an emerging ground improvement method. Although a reduction in permeability of intact and fractured rock is reported due to MICP, the heterogeneous distribution of the ... -
Damage Constitutive Model and Acoustic Emission Characteristics of Recycled Composite Micropowder Concrete under Coupling of Freeze–Thaw Cycles and Bending Load
(American Society of Civil Engineers, 2025)In order to study the damage evolution characteristics of recycled composite micropowder concrete (RCMC) under the coupling of freeze–thaw cycles and bending load and establish a damage constitutive model, a test of the ... -
Effects of Rejuvenator on the Properties of Hot-Mix Recycled Epoxy Asphalt Binder Doped with RAP
(American Society of Civil Engineers, 2025)Asphalt pavement thermal recycling technology plays a crucial role in recycling waste road surface materials, offering a strategy for developing environmentally friendly pavements. The application of epoxy resin polymer ... -
Formulation of Biological Cold Patching Agent in the Application of Cold Patching Asphalt Mixture
(American Society of Civil Engineers, 2025)Bio-based cold patching asphalt mixture shows promising properties in pothole reparation and provides an environmentally friendly alternative to traditional paving materials. However, in-depth studies and the reliable ... -
Experimental Study on Durability of Solidified Sludge under Sulfate Erosion
(American Society of Civil Engineers, 2025)The composite rapid soil stabilizer (CRSS) is a newly developed material for rapid curing of sludge with fast setting, fast hardening, and high strength properties. CRSS was used to solidify the sludge, and the durability ... -
Experimental Investigation of the Shear Resistance of CLT Panels with Unreinforced and Reinforced End Notches
(American Society of Civil Engineers, 2025)This paper presents a comprehensive experimental investigation into the shear resistance and failure of both unreinforced and reinforced notched cross-laminated timber (CLT) panels. It also includes an in-depth statistical ... -
Combination of Alkali Threshold of Aggregates and Alkali Loading of Concrete as Predictive Tool of Alkali–Silica Reactivity in the Field
(American Society of Civil Engineers, 2025)A new protocol to predict the likelihood that concrete develops alkali–silica reaction in the field is presented. This protocol, based on the relationship between the alkali threshold of the aggregate combination and the ... -
Properties of Rejuvenated Reclaimed Asphalt Pavement Mixtures with Waste Glass Powder and Sisal Fibers for Pavements
(American Society of Civil Engineers, 2025)By exploring the usage of reclaimed asphalt pavement (RAP) mixtures in pavement construction, this study fills a substantial gap in the literature. The research includes a number of experimental investigations ranging from ... -
Experimental Study on the Mechanical Property Improvement of MICP by Adding Different Polysaccharide Polymers
(American Society of Civil Engineers, 2025)The low mechanical properties of microbially induced calcium carbonate precipitation (MICP) significantly hinder the engineering application of this technology. Four polysaccharide polymers, including low-viscosity ... -
Microtexture Characterization of Bulk-Aggregate Samples for Application in High-Friction Surface Treatments
(American Society of Civil Engineers, 2025)High-friction surface treatments can improve roadway safety by increasing the pavement friction. Macrotexture and microtexture are primary contributors to pavement friction. Macrotexture has established protocols for ... -
Effect of Boundary Conditions on CPT Calibration Chamber Tests
(American Society of Civil Engineers, 2025)Calibration chambers are employed to reproduce field conditions in laboratory cone penetration tests (CPTs). However, their measurements are often affected by the limited size of the calibration chamber and the imposed ... -
Producing Carbon-Negative Bricks by Regenerating C-S-H from Carbonated Recycled Concrete Fines
(American Society of Civil Engineers, 2025)This study proposes the production of bricks utilizing underutilized fine powders, predominantly consisting of old cement paste derived from the recycling of demolished and waste concrete. Four brick designs were developed ... -
Greener Concrete Paving Blocks with Hybrid Alkaline Cements and Recycled Aggregates
(American Society of Civil Engineers, 2025)The construction sector must deliver methods of construction targeting the valorization of waste that shows potential to play value-added roles. This is a key step to reduce the heavy environmental impacts caused by a ... -
Early-Age Hydration Reaction of Cement Mortars with the Participation of Aluminosilicate Microsphere Fractions
(American Society of Civil Engineers, 2025)The paper presents the influence of two fractions (M1 and M2) of aluminosilicate microspheres in the amount of 0.0%, 1.5%, 3.5%, and 5% as a cement substitute on the early heat of hydration of cement mortars assessed by ... -
Research on the Performance and Mechanism of SBS Latex–Modified Emulsified Asphalt
(American Society of Civil Engineers, 2025)Different modifier dosages affect the performance of emulsified asphalt. In order to analyze the action of styrene-butadiene-styrene (SBS) latex dosing on the performance of emulsified asphalt and emulsified asphalt ... -
Durable Performance of Cement-Based Repair Mortars for Retrofitting and Protection Applications
(American Society of Civil Engineers, 2025)Environmental concern and damage of aging concrete structures have fostered the worldwide use of repair mortars, which can be associated with retrofitting materials. The effectiveness of reparations depends on intrinsic ... -
FRCM–Masonry Joints at High Temperature: Residual Bond Capacity
(American Society of Civil Engineers, 2025)The paper describes the results of an experimental investigation into the bond behavior of fabric-reinforced cementitious matrix (FRCM)–masonry joints after exposure to high temperature. Single-lap direct shear tests (DS) ... -
Polymer-Modified Cementitious Coating Containing Calcium Stearate as a Multifunctional Coating
(American Society of Civil Engineers, 2025)Polymer cementitious coatings (PCCs) are among the well-known types of coatings that combine organic and inorganic coating advantages. Crack-bridging, breathability, scratch resistance, and low water absorption are the ... -
Shear Friction in Single-Generation and Multigeneration Recycled Aggregate Concrete
(American Society of Civil Engineers, 2025)Knowledge of shear friction material properties is central to the design of reinforced concrete elements. These shear friction properties are impacted by components of concrete mix design that impact the roughness of a ... -
Assessment of the Rutting Resistance and Moisture Susceptibility of SMA Mixtures Containing Different Types of Aggregates and Antistripping Additives: A Comparative Study with Limestone and Silica Aggregates
(American Society of Civil Engineers, 2025)Pavement is one of the essential foundational elements of transportation infrastructures. Ensuring the durability and significant quality of pavement surfaces is crucial for both road agencies and users globally. Stone ...