How Irregular Geometry and Flow Waveform Affect Pulsating Arterial Mass TransferSource: Journal of Biomechanical Engineering:;2024:;volume( 146 ):;issue: 012::page 121011-1Author:Strasser, Wayne
DOI: 10.1115/1.4065556Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Alzheimer's disease is a progressive degenerative condition that has various levels of effect on one's memory. It is thought to be caused by a buildup of protein in small fluid-filled spaces in the brain called perivascular spaces (PVS). The PVS often takes on the form of an annular region around arteries and is used as a protein-clearing system for the brain. To analyze the modes of mass transfer in the PVS, a digitized scan of a mouse brain PVS segment was meshed and used for computational fluid dynamics (CFD) studies. Tandem analyses were then carried out and compared between the mouse PVS section and a cylinder with commensurate dimensionless parameters and hydraulic resistance. The geometry pair was used to first validate the CFD model and then assess mass transfer in various advection states: no-flow, constant flow, sinusoidal flow, sinusoidal flow with zero net solvent flux, and an anatomically correct asymmetrical periodic flow. Two mass transfer situations were considered, one being a protein build-up and the other being a protein blend-down using a multitude of metrics. Bulk arterial solute transport was found to be advection-controlled. The consideration of temporal evolution and trajectories of contiguous protein bolus volumes revealed that flow pulsation was beneficial at bolus break-up and that additional local wall curvature-based geometry irregularities also were. Using certain measures, local solute peak concentration blend-down appeared to be diffusion-dominated even for high Peclet numbers; however, bolus size evolution analyses showed definite advection support.
|
Collections
Show full item record
contributor author | Strasser, Wayne | |
date accessioned | 2025-04-21T10:35:31Z | |
date available | 2025-04-21T10:35:31Z | |
date copyright | 10/11/2024 12:00:00 AM | |
date issued | 2024 | |
identifier issn | 0148-0731 | |
identifier other | bio_146_12_121011.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4306507 | |
description abstract | Alzheimer's disease is a progressive degenerative condition that has various levels of effect on one's memory. It is thought to be caused by a buildup of protein in small fluid-filled spaces in the brain called perivascular spaces (PVS). The PVS often takes on the form of an annular region around arteries and is used as a protein-clearing system for the brain. To analyze the modes of mass transfer in the PVS, a digitized scan of a mouse brain PVS segment was meshed and used for computational fluid dynamics (CFD) studies. Tandem analyses were then carried out and compared between the mouse PVS section and a cylinder with commensurate dimensionless parameters and hydraulic resistance. The geometry pair was used to first validate the CFD model and then assess mass transfer in various advection states: no-flow, constant flow, sinusoidal flow, sinusoidal flow with zero net solvent flux, and an anatomically correct asymmetrical periodic flow. Two mass transfer situations were considered, one being a protein build-up and the other being a protein blend-down using a multitude of metrics. Bulk arterial solute transport was found to be advection-controlled. The consideration of temporal evolution and trajectories of contiguous protein bolus volumes revealed that flow pulsation was beneficial at bolus break-up and that additional local wall curvature-based geometry irregularities also were. Using certain measures, local solute peak concentration blend-down appeared to be diffusion-dominated even for high Peclet numbers; however, bolus size evolution analyses showed definite advection support. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | How Irregular Geometry and Flow Waveform Affect Pulsating Arterial Mass Transfer | |
type | Journal Paper | |
journal volume | 146 | |
journal issue | 12 | |
journal title | Journal of Biomechanical Engineering | |
identifier doi | 10.1115/1.4065556 | |
journal fristpage | 121011-1 | |
journal lastpage | 121011-12 | |
page | 12 | |
tree | Journal of Biomechanical Engineering:;2024:;volume( 146 ):;issue: 012 | |
contenttype | Fulltext |