Show simple item record

contributor authorKasitz, Joshua
contributor authorGhufran, Muhammad
contributor authorHuitink, David
date accessioned2025-04-21T10:12:44Z
date available2025-04-21T10:12:44Z
date copyright9/30/2024 12:00:00 AM
date issued2024
identifier issn1043-7398
identifier otherep_146_04_041120.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4305718
description abstractPassive cooling through phase change materials (PCM) creates beneficial complimentary cooling techniques aimed at providing thermal gradient mitigation during device operation without additional power requirements. These have been well studied but are difficult to implement due to complications concerning effective enclosure of the liquid phase. Encapsulated PCM particles can be embedded in other materials to form composites with form stable solid–liquid phase transitions. This study characterizes a new composite of silicone gel and encapsulated phase change materials (ePCMs) for use as an encapsulant. The ePCMs contain a paraffin core and titania shell resulting in a self-contained solid–liquid phase transition producing an average of 132.9 J/g of latent heat capacity. The gel composites gain latent heat capacity as a linear function of ePCM concentration by weight. The 30% ePCM sample contains 41.0 J/g of latent heat capacity, approximately 30% of ePCM control samples. The specific heat capacity of the silicone gel without ePCMs is 1.539 J/g-° C and 2.825 J/g-° C for the ePCM particles. As the ePCM concentration increases, the specific heat capacity is increased toward the highest value of the pure ePCMs across all temperature ranges. The coefficient of thermal expansion of the composites is increased with ePCM concentration up to a maximum of 96% in the 20% ePCM concentration. The elastic modulus remains relatively constant across ePCM concentrations and temperatures. In the needle–needle breakdown voltage testing the 20% sample has a 6 kV/mm reduction in dielectric strength and higher than 20% ePCM samples show increased variability in strength due to the dispersed particles. Overall, the results from these material characterizations demonstrate the promise of dielectric composites containing ePCM particles to add passive cooling capability into electronics devices without complex structures.
publisherThe American Society of Mechanical Engineers (ASME)
titleImpact of Encapsulated Phase Change Material Additives for Improved Thermal Performance of Silicone Gel Insulation
typeJournal Paper
journal volume146
journal issue4
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.4066480
journal fristpage41120-1
journal lastpage41120-8
page8
treeJournal of Electronic Packaging:;2024:;volume( 146 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record