Numerical Analysis of Unsteady Phenomena in a Contra-Rotating Stage Based on the Reduction of Local Entropy Production

Abstract

The primary purpose of this study is the reduction of local entropy production in a contra-rotating stage. As such, the unsteady flow phenomena and the impact of radial load distribution on these phenomena and local entropy production need to be clarified. In this study, the stress-blended eddy simulation (SBES) turbulence model is utilized to capture the vortices in the flow separation zone, and the γ-Reθ transition model is employed to predict the transition phenomenon within the boundary layer. Entropy production rate models suitable for different turbulence models are constructed separately to calculate local entropy production. Vortex visualization is achieved according to the λci criterion, and the relative vorticity change rate is used to analyze the components of the tip clearance vortices. The transition phenomenon is analyzed from the perspectives of both the Euler and the Lagrange descriptions. The primary findings can be summarized as follows: the transition begins earlier and progresses more rapidly in the rear rotor. Wake propagation, occurring at double the frequency, entropy production rate within the boundary layer changes in synchrony with the wall shear stress at the same frequency. Additionally, an investigation of the tip clearance vortices concludes that the main structure of the tip clearance vortices coincides with the flow pattern of the high entropy production rate region, and the flow structure related to the high divergence area is essential for considering subsequent optimization with the aim of reducing the entropy production rate.