Pressurized SOFC System Fuelled by Biogas: Control Approaches and Degradation Impact

Abstract

This paper shows control approaches for managing a pressurized solid oxide fuel cell (SOFC) system fuelled by biogas. This is an advanced solution to integrate the high efficiency benefits of a pressurized SOFC with a renewable source. The operative conditions of these analyses are based on the matching with an emulator rig including a T100 machine for tests in cyber-physical mode. So, this paper presents a real-time model including the fuel cell, the off-gas burner (OFB), and the recirculation lines. Although the microturbine components are planned to be evaluated with the hardware devices, the model includes also the T100 expander for machine control reasons. The simulations shown in this paper regard the assessment of an innovative control tool based on the model predictive control (MPC) technology. This controller and an additional tool based on the coupling of MPC and proportional integral derivative (PID) approaches were assessed against the application of PID controllers. The control targets consider both steady-state and dynamic aspects. Moreover, different control solutions are presented to operate the system during fuel cell degradation. The results include the system response to load variations, and SOFC voltage decrease. Considering the simulations including SOFC degradation, the MPC was able to decrease the thermal stress, but it was not able to compensate the degradation. On the other hand, the tool based on the coupling of the MPC and the PID approaches produced the best results in terms of set-point matching, and SOFC thermal stress containment.