| description abstract | With specimen size decrease for advanced structural materials, the measured mechanics behaviors display the strong size effects. In order to characterize the size effects, several higher-order theories have been presented in the past several decades, such as the strain gradient theories and the micro-polar theories, etc. However, in each higher-order theory, there are several length scale parameters included, which are usually taken as the material parameters and are determined by using the corresponding theoretical predictions to fit experimental results. Since such kind of experimental approaches needs high techniques, it is very difficult to be performed; therefore, the obtained experimental results are very few until now; in addition, the physical meanings of the parameters still need to be investigated. In the present research, an equivalent linkage method is used to simply determine the elastic length parameters appeared in the elastic strain gradient theory for a series of typical metal materials. We use both the elastic strain gradient theory and the higher-order Cauchy-Born rule to model the materials mechanics behaviors by means of a spherical expanding model and then make a linkage for both kinds of results according to the equivalence of strain energy densities. The values of the materials length parameters are obtained for a series of typical metal systems, such as the face-centered cubic (FCC), body-centered cubic (BCC), and hexagonal close-packed (HCP) metals. | |
