Search
Journal of Applied Mechanics
EISSN: 1528-9036
ISSN: 0021-8936
Priority: 12
Publisher: American Society of Mechanical Engineers
Description: The Journal of Applied Mechanics serves as a vehicle for the communication of original research results of permanent interest in all branches of mechanics. The majority of the papers published in the journal are full-length articles of considerable d More ...
CSV
RISModeling the Large Deformation and Microstructure Evolution of Nonwoven Polymer Fiber Networks
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The electrospinning process enables the fabrication of randomly distributed nonwoven polymer fiber networks with high surface area and high porosity, making them ideal candidates for multifunctional materials. The mechanics ...
Parametric Identification of Carbon Nanotube Nanocomposites Constitutive Response
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Hysteresis due to stick-slip energy dissipation in carbon nanotube (CNT) nanocomposites is experimentally observed, measured, and identified through a one-dimensional (1D) phenomenological model obtained via reduction of ...
A Simultaneous Multiscale and Multiphysics Model and Numerical Implementation of a Core-Shell Model for Lithium-Ion Full-Cell Batteries
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The increasing significance on the development of high-performance lithium-ion (Li-ion) batteries is calling for new battery materials, theoretical models, and simulation tools. Lithiation-induced deformation in electrodes ...
Computational Modeling of Dynamically Initiated Instabilities and Implosion of Underwater Cylindrical Structures in a Confined Environment
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper details a numerical study of the dynamic stability of a cylindrical shell structure under combined hydrostatic and dynamic pressure loading within a tubular environment as compared to the traditional loading of ...
Determination of the Flow Stress–Strain Curves of Aluminum Alloy and Tantalum Using the Compressive Load–Displacement Curves of a Hat-Type Specimen
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The load–displacement curves of an aluminum alloy and tantalum were determined using a hat-type specimen in the compression test. Based on the results of finite element analysis, the employed geometry of the hat-type ...
Response of Pounding Dynamic Vibration Neutralizer Under Harmonic and Random Excitation
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Exact steady-state solutions are obtained for the motion of an single-degree-of-freedom (SDOF) system that is provided with a highly nonlinear auxiliary mass damper (AMD), which resembles a conventional dynamic vibration ...
Adhesion of Partially and Fully Collapsed Nanotubes
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The competition between the structural rigidity and the van der Waals interactions may lead to collapsing of aligned nanotubes, and the resulting changes of both configurations and properties promise the applications of ...
2018 Timoshenko Medal Acceptance Lecture: Academic Family
Publisher: The American Society of Mechanical Engineers (ASME)
An Experimental Study on Stretchy and Tough PDMS/Fabric Composites
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Polydimethylsiloxane (PDMS) has a good elasticity but with a pretty low fracture toughness, which limits its use in practical applications. This paper presents a simple and low-cost approach to manufacture a PDMS/fabric ...
Schallamach Wave-Induced Instabilities in a Belt-Drive System
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: We experimentally study the dynamic behavior of a belt-drive system to explore the effect of loading conditions, driving speed, and system inertia on both the frequency and amplitude of the observed frictional and rotational ...