Show simple item record

contributor authorSong, Yiwen
contributor authorLundh, James Spencer
contributor authorWang, Weijie
contributor authorLeach, Jacob H.
contributor authorEichfeld, Devon
contributor authorKrishnan, Anusha
contributor authorPerez, Carlos
contributor authorJi, Dong
contributor authorBorman, Trent
contributor authorFerri, Kevin
contributor authorMaria, Jon-Paul
contributor authorChowdhury, Srabanti
contributor authorRyou, Jae-Hyun
contributor authorFoley, Brian M.
contributor authorChoi, Sukwon
date accessioned2022-02-04T21:57:14Z
date available2022-02-04T21:57:14Z
date copyright7/10/2020 12:00:00 AM
date issued2020
identifier issn1043-7398
identifier otherep_143_01_011011.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4274593
description abstractGallium nitride (GaN) has emerged as one of the most attractive base materials for next-generation high-power and high-frequency electronic devices. Recent efforts have focused on realizing vertical power device structures such as in situ oxide, GaN interlayer based vertical trench metal–oxide–semiconductor field-effect transistors (OG-FETs). Unfortunately, the higher-power density of GaN electronics inevitably leads to considerable device self-heating which impacts device performance and reliability. Halide vapor-phase epitaxy (HVPE) is currently the most common approach for manufacturing commercial GaN substrates used to build vertical GaN transistors. Vertical device structures consist of GaN layers of diverse doping levels. Hence, it is of crucial importance to measure and understand how the dopant type (Si, Fe, and Mg), doping level, and crystal quality alter the thermal conductivity of HVPE-grown bulk GaN. In this work, a steady-state thermoreflectance (SSTR) technique was used to measure the thermal conductivity of HVPE-grown GaN substrates employing different doping schemes and levels. Structural and electrical characterization methods including X-ray diffraction (XRD), secondary-ion mass spectrometry (SIMS), Raman spectroscopy, and Hall-effect measurements were used to determine and compare the GaN crystal quality, dislocation density, doping level, and carrier concentration. Using this comprehensive suite of characterization methods, the interrelation among structural/electrical parameters and the thermal conductivity of bulk GaN substrates was investigated. While doping is evidenced to reduce the GaN thermal conductivity, the highest thermal conductivity (201 W/mK) is observed in a heavily Si-doped (1–5.00 × 1018 cm−3) substrate with the highest crystalline quality. This suggests that phonon-dislocation scattering dominates over phonon-impurity scattering in the tested HVPE-grown bulk GaN substrates. The results provide useful information for designing thermal management solutions for vertical GaN power electronic devices.
publisherThe American Society of Mechanical Engineers (ASME)
titleThe Doping Dependence of the Thermal Conductivity of Bulk Gallium Nitride Substrates
typeJournal Paper
journal volume142
journal issue4
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.4047578
journal fristpage041112-1
journal lastpage041112-15
page15
treeJournal of Electronic Packaging:;2020:;volume( 142 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record