| contributor author | Valentinčič, Joško | |
| contributor author | Prijatelj, Miha | |
| contributor author | Jerman, Marko | |
| contributor author | Lebar, Andrej | |
| contributor author | Sabotin, Izidor | |
| date accessioned | 2022-02-04T14:32:53Z | |
| date available | 2022-02-04T14:32:53Z | |
| date copyright | 2020/02/13/ | |
| date issued | 2020 | |
| identifier issn | 2166-0468 | |
| identifier other | jmnm_008_01_010911.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4273885 | |
| description abstract | A custom-made stereolithographic printer using a digital light processing optical (DLP) system based on a digital micromirror device (DMD) was characterized. Several sizes of slanted grooved micromixers (SGM) were produced and typical dimensions were measured and compared to nominal values. The results show that the developed SLA printer is precise enough to be used for prototyping of larger microfluidic devices. The lateral geometries of the smallest printed micromixer designs deviated less than 20 μm from the nominal values and related feature depths deviated for less than 15 μm. However, further modifications are needed in order to improve the repeatability, accuracy, and printing resolution. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Characterization of a Custom-Made Digital Light Processing Stereolithographic Printer Based on a Slanted Groove Micromixer Geometry | |
| type | Journal Paper | |
| journal volume | 8 | |
| journal issue | 1 | |
| journal title | Journal of Micro and Nano-Manufacturing | |
| identifier doi | 10.1115/1.4046044 | |
| page | 10911 | |
| tree | Journal of Micro and Nano-Manufacturing:;2020:;volume( 008 ):;issue: 001 | |
| contenttype | Fulltext | |