Show simple item record

contributor authorLi, Yu
contributor authorLi, Hailin
contributor authorGuo, Hongsheng
contributor authorLi, Yongzhi
contributor authorYao, Mingfa
date accessioned2019-02-28T10:57:50Z
date available2019-02-28T10:57:50Z
date copyright5/29/2018 12:00:00 AM
date issued2018
identifier issn0742-4795
identifier othergtp_140_09_092804.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4251218
description abstractThis research numerically simulates the formation and destruction of nitrogen dioxide (NO2) in a natural gas (NG)–diesel dual fuel engine using commercial CFD software converge coupled with a reduced primary reference fuel (PRF) mechanism consisting of 45 species and 142 reactions. The model was validated by comparing the simulated cylinder pressure, heat release rate (HRR), and nitrogen oxide (NOx) emissions with experimental data. The validated model was used to simulate the formation and destruction of NO2 in a NG–diesel dual fuel engine. The formation of NO2 and its correlation with the local concentration of nitric oxide (NO), methane, and temperature were examined and discussed. It was revealed that NO2 was mainly formed in the interface region between the hot NO-containing combustion products and the relatively cool unburnt methane–air mixture. The NO2 formed at the early combustion stage is usually destructed to NO after the complete oxidation of methane and n-heptane, while NO2 formed during the postcombustion process survives through the expansion process and exits the engine. The increased NO2 emissions from NG–diesel dual fuel engines was formed during the post combustion process due to higher concentration of HO2 produced during the oxidation process of the unburned methane at low temperature. A detailed analysis of the chemical reactions occurring in the NO2 containing zone consisting of NO2, NO, O2, methane, etc., was conducted using a quasi-homogeneous constant volume (QHCV) model to identify the key reactions and species dominating NO2 formation and destruction. The HO2 produced during the postcombustion process of methane was identified as the primary species dominating the formation of NO2 during the post combustion expansion process. The simulation revealed the key reaction path for the formation of HO2 noted as CH4 → CH3 → CH2O → HCO → HO2, with conversion ratios of 98%, 74%, 90%, 98%, accordingly. The backward reaction of OH + NO2 = NO + HO2 consumed 34% of HO2 for the production of NO2.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Numerical Investigation on NO2 Formation in a Natural Gas–Diesel Dual Fuel Engine
typeJournal Paper
journal volume140
journal issue9
journal titleJournal of Engineering for Gas Turbines and Power
identifier doi10.1115/1.4039734
journal fristpage92804
journal lastpage092804-9
treeJournal of Engineering for Gas Turbines and Power:;2018:;volume( 140 ):;issue: 009
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record