Show simple item record

contributor authorLiu, Yuan
contributor authorDai, Jinyue
contributor authorLiu, Xiaoqing
contributor authorLuo, Jun
contributor authorYou, Shusen
contributor authorZhu, Jin
contributor authorMa, Songqi
contributor authorJia, Zhen
date accessioned2017-11-25T07:21:04Z
date available2017-11-25T07:21:04Z
date copyright2017/30/6
date issued2017
identifier issn1043-7398
identifier otherep_139_03_031006.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4236867
description abstractIn this paper, a series of bio-based epoxy resins containing organic silicone were prepared from eugenol through a mild synthetic route. Then, 4,4′-diaminophenyl methane (DDM) was applied to cure these epoxy resins, and bisphenol A epoxy resin (DGEBA) was used as a control. The chemical structures of the synthesized resins were characterized by nuclear magnetic resonance (1H-NMR). Properties of the cured epoxy resins were investigated by dielectric test, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM). Compared with DGEBA, the bio-based epoxy resin containing cyclic organic silicon structure exhibited a dramatically lower dielectric constant at both low and high frequencies (3.46, 1 kHz, room temperature). Moreover, the silicone-modified bio-based epoxy resins demonstrated no weight loss below 325 °C and higher residues at 800 °C than that of DGEBA.
publisherThe American Society of Mechanical Engineers (ASME)
titleBio-Based Epoxy Resins Derived From Eugenol With Low Dielectric Constant
typeJournal Paper
journal volume139
journal issue3
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.4036818
journal fristpage31006
journal lastpage031006-7
treeJournal of Electronic Packaging:;2017:;volume( 139 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record