| contributor author | Xu, Lizhong | |
| contributor author | Liu, Yulei | |
| date accessioned | 2017-05-09T01:32:02Z | |
| date available | 2017-05-09T01:32:02Z | |
| date issued | 2016 | |
| identifier issn | 2166-0468 | |
| identifier other | jmnm_004_01_014501.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/162141 | |
| description abstract | The microsensors are mainly made with the single crystal silicon which requires expensive equipments and complicated process. Here, the microelectroforming technology is used to fabricate the microresonant gas sensor. The fabricating process of the microresonant gas sensor is proposed. A microcantilever beam resonator 900 خ¼m long, 300 خ¼m wide, and 10 خ¼m thick is fabricated. The resonant frequency shift is measured when exposed to ethanol vapor. Results show that the shift in the resonant frequency is approximately proportional to the ethanol vapor concentration, and the detection accuracy to ethanol vapor with the sensor is about 1 ppm per Hz frequency shift. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | A Microresonant Gas Sensor by Micro Electroforming | |
| type | Journal Paper | |
| journal volume | 4 | |
| journal issue | 1 | |
| journal title | Journal of Micro and Nano | |
| identifier doi | 10.1115/1.4031740 | |
| journal fristpage | 14501 | |
| journal lastpage | 14501 | |
| identifier eissn | 1932-619X | |
| tree | Journal of Micro and Nano-Manufacturing:;2016:;volume( 004 ):;issue: 001 | |
| contenttype | Fulltext | |