Show simple item record

contributor authorMohammed, Ibrahim K.
date accessioned2017-05-09T01:27:16Z
date available2017-05-09T01:27:16Z
date issued2016
identifier issn0022-0434
identifier otherds_138_11_111002.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/160748
description abstractWireless capsule endoscopes (WCE) are a new technology for inspection of the intestines, which offer many advantages over conventional endoscopes, while devices currently in use are passive and can only follow the natural transit of the intestines. There is a considerable interest in methods of controlled actuation for these devices. In this paper, an actuation system based on magnetic levitation is proposed, utilizing a small permanent magnet within the capsule and an arrangement of digitally controlled electromagnet placed on a movable frame. The objective of this paper is to design a multiinput multioutput (MIMO), three degreesoffreedom (3DOF) tracking system for capsule endoscope. Two techniques, entire eigenstructure assignment (EEA) and linear quadratic regulator (LQR), are presented to design the controller of the system. The performance of the EEA and LQR controllers was compared based on the stability parameters to validate the proposed actuation system. Finally, simulation results suggest that the LQR approach can be used to synthesize a suitable and simple controller for this application.
publisherThe American Society of Mechanical Engineers (ASME)
titleDesign and Simulation of Three Degrees of Freedom Tracking Systems for Capsule Endoscope
typeJournal Paper
journal volume138
journal issue11
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4033830
journal fristpage111002
journal lastpage111002
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2016:;volume( 138 ):;issue: 011
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record