Minimization of Heat Load Due to Secondary Reactions in Fuel Rich Environments

Abstract

The demand for increased thrust, higher engine efficiency, and reduced fuel consumption has increased the turbine inlet temperature and pressure in modern gas turbine engines. The outcome of these higher temperatures and pressures is the potential for unconsumed radical species to enter the turbine. Because modern cooling schemes for turbine blades involve injecting cool, oxygenrich air adjacent to the surface, the potential for reaction with radicals in the mainstream flow, and augmented heat transfer to the blade arises. This result is contrary to the purpose of film cooling. In this environment, there is a competing desire to consume any free radicals prior to the flow entering the rotor stage while still maintaining surface temperatures below the metal melting temperature. This study evaluated various configurations of multiple cylindrical rows of cooling holes in terms of both heat release and effective downstream cooling. Results were evaluated based on net heat flux reduction (NHFR) and a new wall absorption (WA) parameter which combined the additional heat available from these secondary reactions with the length of the resulting flame to determine which schemes protected the wall more efficiently. Two particular schemes showed promise. The two row upstream configuration reduced the overall augmentation of heat by creating a short, concentrated reaction area. Conversely, the roll forward configuration minimized the local heat flux enhancement by spreading the reaction area over the surface being cooled.