Stiffness Analysis and Control of a Stewart Platform Based Manipulator With Decoupled Sensor–Actuator Locations for Ultrahigh Accuracy Positioning Under Large External Loads

Abstract

Robot frame compliance has a large negative effect on the global accuracy of the system when large external forces/torques are exerted. This phenomenon is particularly problematic in applications where the robot is required to achieve ultrahigh (micron level) accuracy under very large external loads, e.g., in biomechanical testing and high precision machining. To ensure the positioning accuracy of the robot in these applications, the authors proposed a novel Stewart platformbased manipulator with decoupled sensor–actuator locations. The unique mechanism has the sensor locations fully decoupled from the actuator locations for the purpose of passively compensating for the load frame compliance, as a result improving the effective stiffness of the manipulator in six degrees of freedom (6DOF). In this paper, the stiffness of the proposed manipulator is quantified via a simplified method, which combines both an analytical model (robot kinematics error model) and a numerical model [finite element analysis (FEA) model] in the analysis. This method can be used to design systems with specific stiffness requirements. In the control aspect, the noncollocated positions of the sensors and actuators lead to a suboptimal control structure, which is addressed in the paper using a simple Jacobianbased decoupling method under both kinematicsand dynamicsbased control. Simulation results demonstrate that the proposed manipulator configuration has an effective stiffness that is increased by a factor of greater than 15 compared to a general design. Experimental results show that the Jacobianbased decoupling method effectively increases the dynamic tracking performance of the manipulator by 25% on average over a conventional method.