Effects of a Low Octane Gasoline Blended Fuel on Negative Valve Overlap Enabled HCCI Load Limit, Combustion Phasing and Burn Duration

Abstract

Homogeneous charge compression iginition (HCCI) combustion allows for the use of fuels with octane requirements below that of sparkignited engines. A reference gasoline was compared with isooctane and a low octane blend of gasoline and 40% nheptane, NH40. Experiments were conducted on a single cylinder engine operating with negative valve overlap (NVO). The fuel flow rate per cycle was compensated based on the lower heating value to maintain a constant energy addition across fuels. Isooctane and gasoline demonstrated similar maximum load, achieving a gross IMEPg of ~430 kPa, whereas the NH40 demonstrated an increased IMEPg of ~460 kPa. The NH40 could be operated at a later phasing compared with the higher octane fuels, and exhibited a shorter burn duration at a given fueling rate and phasing. These results could be due to compositional differences, as NH40 required less NVO compared to isooctane and gasoline, leading to less thermal and compositional stratification, as well as a higher O2 concentration and less residual gas. Additionally, the NH40 fuel demonstrated a higher intermediate temperature heat release than the higher octane fuels, potentially contributing to the shorter burn duration. Overall, these results demonstrate clear benefits to NVO enabled HCCI combustion with low octane fuels.