Show simple item record

contributor authorHsiao, Tesheng
contributor authorWeng, Mao
date accessioned2017-05-09T00:57:22Z
date available2017-05-09T00:57:22Z
date issued2013
identifier issn0022-0434
identifier otherds_135_3_031010.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/151298
description abstractMost manipulator motion controllers require joint velocity feedback. Whenever joint velocities are not measurable, they are estimated from the joint positions. However, velocity estimates tend to be inaccurate under lowspeed motion or low sensor resolution conditions. Moreover, velocity estimators may either be susceptible to model uncertainties or introduce additional dynamics (e.g., phase lag) to the control loop. Consequently, direct substitution of velocity estimates into the controller results in the deterioration of the control performance and robustness margin. Therefore, this paper proposes a robust positionfeedback motion controller which gets rid of the problems of uncompensated dynamics and model uncertainties introduced by velocity estimators. Furthermore, a globally asymptotically stable system, which is robust with respective to model parameter variations, is guaranteed. Theoretical analysis and experimental verifications are carried out. The results demonstrate that the proposed controller is robust and outperforms the conventional computed torque plus proportional integral differential (PID) controller.
publisherThe American Society of Mechanical Engineers (ASME)
titleRobust Joint Position Feedback Control of Robot Manipulators
typeJournal Paper
journal volume135
journal issue3
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4023669
journal fristpage31010
journal lastpage31010
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2013:;volume( 135 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record