contributor author | Syed Khalid Imran | |
contributor author | Rizwan Raza | |
contributor author | Bin Zhu | |
contributor author | Ghazanfar Abbas | |
date accessioned | 2017-05-09T00:44:31Z | |
date available | 2017-05-09T00:44:31Z | |
date copyright | December, 2011 | |
date issued | 2011 | |
identifier issn | 2381-6872 | |
identifier other | JFCSAU-28951#061014_1.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/146419 | |
description abstract | Bio-ethanol based fuel cell is an energy source with a promising future. The low temperature solid oxide fuel cell fed by direct bio-ethanol is receiving considerable attention as a clean and highly efficient for the production of both electricity and high grade waste heat. The comparison of fuel cell performance with different metal-oxide based electrodes was investigated. The power densities of 584 mW cm-2 and 514 mW cm-2 at 520 °C and 570 °C respectively were found. The effect of electrode catalyst function, ethanol concentration on the electrical performance was investigated at different temperature ranged in between 300 °C−600 °C. The effect of deposited carbon on the electrode was investigated by energy-dispersive X-ray spectroscopy and scanning electron microscope after testing the cell with bio-ethanol. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | Characterization and Development of Bio-Ethanol Solid Oxide Fuel Cell | |
type | Journal Paper | |
journal volume | 8 | |
journal issue | 6 | |
journal title | Journal of Fuel Cell Science and Technology | |
identifier doi | 10.1115/1.4004475 | |
journal fristpage | 61014 | |
identifier eissn | 2381-6910 | |
keywords | Fuels | |
keywords | Fuel cells | |
keywords | Solid oxide fuel cells | |
keywords | Ethanol | |
keywords | Electrolytes | |
keywords | Testing AND Electrodes | |
tree | Journal of Fuel Cell Science and Technology:;2011:;volume( 008 ):;issue: 006 | |
contenttype | Fulltext | |