Show simple item record

contributor authorSyed Khalid Imran
contributor authorRizwan Raza
contributor authorBin Zhu
contributor authorGhazanfar Abbas
date accessioned2017-05-09T00:44:31Z
date available2017-05-09T00:44:31Z
date copyrightDecember, 2011
date issued2011
identifier issn2381-6872
identifier otherJFCSAU-28951#061014_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/146419
description abstractBio-ethanol based fuel cell is an energy source with a promising future. The low temperature solid oxide fuel cell fed by direct bio-ethanol is receiving considerable attention as a clean and highly efficient for the production of both electricity and high grade waste heat. The comparison of fuel cell performance with different metal-oxide based electrodes was investigated. The power densities of 584 mW cm-2 and 514 mW cm-2 at 520 °C and 570 °C respectively were found. The effect of electrode catalyst function, ethanol concentration on the electrical performance was investigated at different temperature ranged in between 300 °C−600 °C. The effect of deposited carbon on the electrode was investigated by energy-dispersive X-ray spectroscopy and scanning electron microscope after testing the cell with bio-ethanol.
publisherThe American Society of Mechanical Engineers (ASME)
titleCharacterization and Development of Bio-Ethanol Solid Oxide Fuel Cell
typeJournal Paper
journal volume8
journal issue6
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.4004475
journal fristpage61014
identifier eissn2381-6910
keywordsFuels
keywordsFuel cells
keywordsSolid oxide fuel cells
keywordsEthanol
keywordsElectrolytes
keywordsTesting AND Electrodes
treeJournal of Fuel Cell Science and Technology:;2011:;volume( 008 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record