Fabrication and Modeling of Dynamic Multipolymer Nanofibrous ScaffoldsSource: Journal of Biomechanical Engineering:;2009:;volume( 131 ):;issue: 010::page 101012Author:Brendon M. Baker
,
Nandan L. Nerurkar
,
Jason A. Burdick
,
Dawn M. Elliott
,
Robert L. Mauck
DOI: 10.1115/1.3192140Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Aligned nanofibrous scaffolds hold tremendous potential for the engineering of dense connective tissues. These biomimetic micropatterns direct organized cell-mediated matrix deposition and can be tuned to possess nonlinear and anisotropic mechanical properties. For these scaffolds to function in vivo, however, they must either recapitulate the full dynamic mechanical range of the native tissue upon implantation or must foster cell infiltration and matrix deposition so as to enable construct maturation to meet these criteria. In our recent studies, we noted that cell infiltration into dense aligned structures is limited but could be expedited via the inclusion of a distinct rapidly eroding sacrificial component. In the present study, we sought to further the fabrication of dynamic nanofibrous constructs by combining multiple-fiber populations, each with distinct mechanical characteristics, into a single composite nanofibrous scaffold. Toward this goal, we developed a novel method for the generation of aligned electrospun composites containing rapidly eroding (PEO), moderately degradable (PLGA and PCL/PLGA), and slowly degrading (PCL) fiber populations. We evaluated the mechanical properties of these composites upon formation and with degradation in a physiologic environment. Furthermore, we employed a hyperelastic constrained-mixture model to capture the nonlinear and time-dependent properties of these scaffolds when formed as single-fiber populations or in multipolymer composites. After validating this model, we demonstrated that by carefully selecting fiber populations with differing mechanical properties and altering the relative fraction of each, a wide range of mechanical properties (and degradation characteristics) can be achieved. This advance allows for the rational design of nanofibrous scaffolds to match native tissue properties and will significantly enhance our ability to fabricate replacements for load-bearing tissues of the musculoskeletal system.
keyword(s): Composite materials , Fibers , Manufacturing , Stress , Modeling , Biological tissues AND Mechanical properties ,
|
Collections
Show full item record
contributor author | Brendon M. Baker | |
contributor author | Nandan L. Nerurkar | |
contributor author | Jason A. Burdick | |
contributor author | Dawn M. Elliott | |
contributor author | Robert L. Mauck | |
date accessioned | 2017-05-09T00:31:30Z | |
date available | 2017-05-09T00:31:30Z | |
date copyright | October, 2009 | |
date issued | 2009 | |
identifier issn | 0148-0731 | |
identifier other | JBENDY-27048#101012_1.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/139844 | |
description abstract | Aligned nanofibrous scaffolds hold tremendous potential for the engineering of dense connective tissues. These biomimetic micropatterns direct organized cell-mediated matrix deposition and can be tuned to possess nonlinear and anisotropic mechanical properties. For these scaffolds to function in vivo, however, they must either recapitulate the full dynamic mechanical range of the native tissue upon implantation or must foster cell infiltration and matrix deposition so as to enable construct maturation to meet these criteria. In our recent studies, we noted that cell infiltration into dense aligned structures is limited but could be expedited via the inclusion of a distinct rapidly eroding sacrificial component. In the present study, we sought to further the fabrication of dynamic nanofibrous constructs by combining multiple-fiber populations, each with distinct mechanical characteristics, into a single composite nanofibrous scaffold. Toward this goal, we developed a novel method for the generation of aligned electrospun composites containing rapidly eroding (PEO), moderately degradable (PLGA and PCL/PLGA), and slowly degrading (PCL) fiber populations. We evaluated the mechanical properties of these composites upon formation and with degradation in a physiologic environment. Furthermore, we employed a hyperelastic constrained-mixture model to capture the nonlinear and time-dependent properties of these scaffolds when formed as single-fiber populations or in multipolymer composites. After validating this model, we demonstrated that by carefully selecting fiber populations with differing mechanical properties and altering the relative fraction of each, a wide range of mechanical properties (and degradation characteristics) can be achieved. This advance allows for the rational design of nanofibrous scaffolds to match native tissue properties and will significantly enhance our ability to fabricate replacements for load-bearing tissues of the musculoskeletal system. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | Fabrication and Modeling of Dynamic Multipolymer Nanofibrous Scaffolds | |
type | Journal Paper | |
journal volume | 131 | |
journal issue | 10 | |
journal title | Journal of Biomechanical Engineering | |
identifier doi | 10.1115/1.3192140 | |
journal fristpage | 101012 | |
identifier eissn | 1528-8951 | |
keywords | Composite materials | |
keywords | Fibers | |
keywords | Manufacturing | |
keywords | Stress | |
keywords | Modeling | |
keywords | Biological tissues AND Mechanical properties | |
tree | Journal of Biomechanical Engineering:;2009:;volume( 131 ):;issue: 010 | |
contenttype | Fulltext |