Show simple item record

contributor authorBrendon M. Baker
contributor authorNandan L. Nerurkar
contributor authorJason A. Burdick
contributor authorDawn M. Elliott
contributor authorRobert L. Mauck
date accessioned2017-05-09T00:31:30Z
date available2017-05-09T00:31:30Z
date copyrightOctober, 2009
date issued2009
identifier issn0148-0731
identifier otherJBENDY-27048#101012_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/139844
description abstractAligned nanofibrous scaffolds hold tremendous potential for the engineering of dense connective tissues. These biomimetic micropatterns direct organized cell-mediated matrix deposition and can be tuned to possess nonlinear and anisotropic mechanical properties. For these scaffolds to function in vivo, however, they must either recapitulate the full dynamic mechanical range of the native tissue upon implantation or must foster cell infiltration and matrix deposition so as to enable construct maturation to meet these criteria. In our recent studies, we noted that cell infiltration into dense aligned structures is limited but could be expedited via the inclusion of a distinct rapidly eroding sacrificial component. In the present study, we sought to further the fabrication of dynamic nanofibrous constructs by combining multiple-fiber populations, each with distinct mechanical characteristics, into a single composite nanofibrous scaffold. Toward this goal, we developed a novel method for the generation of aligned electrospun composites containing rapidly eroding (PEO), moderately degradable (PLGA and PCL/PLGA), and slowly degrading (PCL) fiber populations. We evaluated the mechanical properties of these composites upon formation and with degradation in a physiologic environment. Furthermore, we employed a hyperelastic constrained-mixture model to capture the nonlinear and time-dependent properties of these scaffolds when formed as single-fiber populations or in multipolymer composites. After validating this model, we demonstrated that by carefully selecting fiber populations with differing mechanical properties and altering the relative fraction of each, a wide range of mechanical properties (and degradation characteristics) can be achieved. This advance allows for the rational design of nanofibrous scaffolds to match native tissue properties and will significantly enhance our ability to fabricate replacements for load-bearing tissues of the musculoskeletal system.
publisherThe American Society of Mechanical Engineers (ASME)
titleFabrication and Modeling of Dynamic Multipolymer Nanofibrous Scaffolds
typeJournal Paper
journal volume131
journal issue10
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.3192140
journal fristpage101012
identifier eissn1528-8951
keywordsComposite materials
keywordsFibers
keywordsManufacturing
keywordsStress
keywordsModeling
keywordsBiological tissues AND Mechanical properties
treeJournal of Biomechanical Engineering:;2009:;volume( 131 ):;issue: 010
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record