Mixed Slip-Deceleration Control in Automotive Braking Systems

Abstract

In road vehicles, wheel locking can be prevented by means of closed-loop anti-lock braking systems (ABS). Automatic braking is extensively used also for electronic stability control (ESC) systems. In braking control systems, two output variables are usually considered for regulation purposes: wheel deceleration and wheel longitudinal slip. Wheel deceleration is the controlled output traditionally used in ABS, since it can be easily measured with a simple wheel encoder; however, the dynamics of a classical regulation loop on the wheel deceleration critically depend on the road conditions. A regulation loop on the wheel longitudinal slip is simpler and dynamically robust; moreover, slip control is perfectly suited for both ABS and ESC applications. However, the wheel-slip measurement is critical, since it requires the estimation of the longitudinal speed of the vehicle body, which cannot be directly measured. Noise sensitivity of slip control hence is a critical issue, especially at low speed. In this work a new control strategy called mixed slip-deceleration (MSD) control is proposed: the basic idea is that the regulated variable is a convex combination of wheel deceleration and longitudinal slip. This strategy turns out to be very powerful and flexible: it inherits all the attractive dynamical features of slip control, while providing a much lower sensitivity to slip-measurement noise.