Show simple item record

contributor authorJian Wang
contributor authorHendrik Van Brussel
contributor authorJan Swevers
date accessioned2017-05-09T00:09:48Z
date available2017-05-09T00:09:48Z
date copyrightMarch, 2003
date issued2003
identifier issn0022-0434
identifier otherJDSMAA-26314#27_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/128147
description abstractThe closed-loop transfer function of a plant controlled with a classical feedback controller, depends on the dynamics of the plant. Since most feedforward tracking controllers are designed based on this closed-loop transfer function, they are not robust against plant model uncertainties. Sliding-mode controllers have the property that when the system is on the switching line, the closed-loop behavior is independent of the plant dynamics. As a result, it can be expected that a feedforward control design based on this closed-loop behavior is robust against plant model uncertainties. This paper studies this feedforward robustness issue in detail and verifies the results on an experimental test setup: a stage driven by a linear motor. An integrated procedure is proposed in designing the closed-loop discrete-time sliding mode controller using the reaching law method.
publisherThe American Society of Mechanical Engineers (ASME)
titleRobust Perfect Tracking Control With Discrete Sliding Mode Controller
typeJournal Paper
journal volume125
journal issue1
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.1540994
journal fristpage27
journal lastpage32
identifier eissn1528-9028
keywordsControl equipment
keywordsTransfer functions
keywordsFeedforward control
keywordsIndustrial plants
keywordsDesign
keywordsTracking control AND Feedback
treeJournal of Dynamic Systems, Measurement, and Control:;2003:;volume( 125 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record