contributor author | R. C. Bell | |
contributor author | J. T. Stewart | |
contributor author | T. W. Prete | |
date accessioned | 2017-05-08T23:50:03Z | |
date available | 2017-05-08T23:50:03Z | |
date copyright | July, 1996 | |
date issued | 1996 | |
identifier issn | 1528-8919 | |
identifier other | JETPEZ-26756#547_1.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/116903 | |
description abstract | This paper describes the specification, development, and testing of the FT8-2 Dry Low NOx control system, and how the lean burn process requires an integration of the control system and combustion hardware. The FT8-2 digital fuel control system was developed to achieve the precise multizone fuel metering of both gas and liquid fuels, the calculation of combustor air flow necessary to achieve Dry Low NOx and the traditional governing/limiting control loops necessary for safe, stable engine operation. The system design goals were accomplished by the concurrent development of software-based fuel metering algorithms and fuel metering hardware. The fuel metering hardware utilizes an all-electronic valve positioner, employing a combination of feedback and software to achieve closed-loop control of actual fuel flow. Extensive testing under actual gas flow conditions and closed-loop bench testing using a real time engine model and fuel system model was conducted to prove system operation and develop system transient response prior to installation on the test engine. The setup and results of the flow testing and closed-loop testing are described. The paper describes the control scheme used to apportion the gas fuel between combustion zones and how external conditions such as ambient temperature and fuel gas composition affect the apportionment. The paper concludes with a description of the control system installation in the engine test cell and a review of engine test results. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | Specification, Development, and Testing of the FT8-2 Dry Low NOx Control System | |
type | Journal Paper | |
journal volume | 118 | |
journal issue | 3 | |
journal title | Journal of Engineering for Gas Turbines and Power | |
identifier doi | 10.1115/1.2816682 | |
journal fristpage | 547 | |
journal lastpage | 552 | |
identifier eissn | 0742-4795 | |
keywords | Control systems | |
keywords | Testing | |
keywords | Nitrogen oxides | |
keywords | Fuels | |
keywords | Engines | |
keywords | Hardware | |
keywords | Computer software | |
keywords | Flow (Dynamics) | |
keywords | Combustion | |
keywords | Gaseous fuels | |
keywords | Temperature | |
keywords | Air flow | |
keywords | Feedback | |
keywords | Valves | |
keywords | Gas flow | |
keywords | Fuel systems | |
keywords | Transients (Dynamics) | |
keywords | Combustion chambers | |
keywords | Algorithms AND Design | |
tree | Journal of Engineering for Gas Turbines and Power:;1996:;volume( 118 ):;issue: 003 | |
contenttype | Fulltext | |