Search
CSV
RISLiving Heart Human Model: Cardiovascular Stent Deployment and Cardiac Cycle Simulation1
Publisher: The American Society of Mechanical Engineers (ASME)
Development of a Novel Test Method to Characterize Material Properties in Corrosive Environments for Subsea HPHT Design
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: High pressure high temperature (HPHT) design is a significant new challenge facing the subsea sector, particularly in the Gulf of Mexico. API 17TR8 provides HPHT Design Guidelines, specifically for subsea applications. ...
Evolution of Turbulence and Its Modification by Axial Casing Grooves in a Multi-Stage Axial Compressor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This experimental study examines the evolution of turbulence across an axial compressor and its modification by semicircular axial casing grooves (ACGs) at the pre-stall and near the best efficiency (BEP) flowrates. The ...
Impact of Operating Conditions and Axial Casing Grooves on the Evolution of Flow Structure Across Blade Rows in an Axial Compressor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Stereo particle image velocimetry (SPIV) measurements in a series of axial planes investigate the impact of operating conditions and semicircular axial casing grooves (ACGs) on the evolution of flow structure across multiple ...
Nonhyperbolicity of Conservation Equations of RELAP5 Two-Fluid Model in Nuclear Reactor Safety Results (Investigation and Eigenvalue Analysis)
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The RELAP5 code simulates the thermal-hydraulic characteristics of nuclear reactors by the use of a two-fluid one-dimensional, nonequilibrium, nonhomogeneous two-phase flow model. This model consists of six governing ...
Ex-Vessel Loss of Coolant Accident Analysis of ITER Divertor Cooling System Using Modified RELAP/SCADAPSIM/Mod 4.0
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The initial design of ITER incorporated the use of carbon fiber composites in high heat flux regions and tungsten was used for low heat flux regions. The current design includes tungsten for both these regions. The present ...
Thermal Hydraulic and Safety Assessment of First Wall Helium Cooling System of a Generalized Test Blanket System in ITER Using RELAP/SCDAPSIM/MOD4.0 Code
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The key objective of the test blanket module (TBM) program is to develop the design technology for DEMO and future power-producing fusion reactors. The proposed first wall of the test blanket system (TBS) is a generalized ...
Thermal Hydraulic Safety Assessment of LLCB Test Blanket System in ITER Using Modified relap/scdapsim/mod4.0 Code
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This work attempts to investigate the thermal hydraulic safety of lithium lead ceramic breeder (LLCB) test blanket system (TBS) in International Thermonuclear Experimental Reactor (ITER) with the help of modified thermal ...
Analysis of Loss of Heat Sink for ITER Divertor Cooling System Using Modified RELAP/SCDAPSIM/MOD 4.0
Publisher: American Society of Mechanical Engineers (ASME)
Abstract: The present work includes thermal hydraulic modeling and analysis of loss of heat sink (LOHS) accident for the ITER divertor cooling system. The analysis is done for the new design of full tungsten divertor. The new design ...
Fabrication Aspects and Performance Characterization of α-Al2O3/AlPO4 Based Sandwich Configuration Flow Channel Inserts and Coatings for High Temperature Liquid Metal Applications
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Liquid metals (LMs) exhibit several key characteristics justifying their utilization as coolants and breeders for nuclear fusion reactors and advanced fission reactors. In fusion reactors, the LMs confront an exorbitantly ...